From: "Petr Vandrovec" <VANDROVE@vc.cvut.cz>
To: viro@math.psu.edu
Cc: linux-kernel@vger.kernel.org
Subject: 2.5.0 breakage even with fix?
Date: Sat, 24 Nov 2001 00:54:10 MET-1 [thread overview]
Message-ID: <A0A71547524@vcnet.vc.cvut.cz> (raw)
Hi Al,
I'm now running 2.5.0 with fix you posted - and now during dselect
run I received:
Unpacking replacement manpages ...
EXT2-fs error (device ide0(3,3)): ext2_check_page: bad entry in directory
#3801539: unaligned directory entry - offset=0, inode=1801675088,
rec_len=26465, name_len=101
Remounting filesystem read-only
rm: cannot remove directory `/var/lib/dpkg/tmp.ci': Read-only file system
...
and system is obviously unusable. I'll probably reboot and run fsck again.
If someone can show me how I can dump contents of some inode by number
(and not by name) in debugfs, I can look into inode itself... I found
only 'ncheck', to convert number to name, and this is running and running...
System was running 2.5.0 without patch for some time, but I followed
your guidelines for rebooting:
fuser -k /
sync
mount -o remount,ro /
sync
reboot
After reboot fsck was NOT run, so it is possible that there
might be some corruption - but I ran fsck on my non-root partition
after boot, and it did not show any problems.
Thanks,
Petr Vandrovec
vandrove@vc.cvut.cz
next reply other threads:[~2001-11-23 23:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-11-24 0:54 Petr Vandrovec [this message]
2001-11-24 0:13 ` 2.5.0 breakage even with fix? Alexander Viro
2001-11-24 23:05 ` Robert Boermans
2001-11-24 23:03 ` Alexander Viro
2001-11-24 23:14 ` Jeff Merkey
2001-11-24 0:23 ` Andreas Dilger
-- strict thread matches above, loose matches on Subject: below --
2001-11-24 1:05 Petr Vandrovec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=A0A71547524@vcnet.vc.cvut.cz \
--to=vandrove@vc.cvut.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=viro@math.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.