From: "Michael Anburaj" <michaelanburaj@hotmail.com>
To: jbglaw@lug-owl.de, linux-mips@linux-mips.org
Subject: Re: Linux for MIPS Atlas 4Kc board
Date: Thu, 08 May 2003 22:47:40 -0700 [thread overview]
Message-ID: <BAY1-F57ShEHR6jvPP600007b5b@hotmail.com> (raw)
Hi JBG,
I have passed a static IP address as parameter.
YAMON> go . nfsroot=4.42.102.7:/export/RedHat7.1 \
? ip=4.42.102.6:4.42.102.7:4.42.102.1:255.255.252.0
LINUX started...
Config serial console: ttyS0,115200
CPU revision is: 00018001
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB 4-way, linesize 16 bytes.
Linux version 2.4.21-pre4 (root@localhost.localdomain) (gcc version
egcs-2.91.63Determined physical RAM map:
memory: 00001000 @ 00000000 (reserved)
memory: 000ef000 @ 00001000 (ROM data)
memory: 00010000 @ 000f0000 (ROM data)
memory: 001a4000 @ 00100000 (reserved)
memory: 03d5c000 @ 002a4000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: nfsroot=4.42.102.7:/export/RedHat7.1
ip=4.42.102.6:4.42.100calculating r4koff... 00061a83(400003)
CPU frequency 80.00 MHz
Calibrating delay loop... 79.66 BogoMIPS
Memory: 62120k/62832k available (1308k kernel code, 712k reserved, 164k
data, 1)Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction... available.
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware on host bus 0.
PCI: device 01:06.0 has unknown header type 7f, ignoring.
PCI: device 01:0b.0 has unknown header type 7f, ignoring.
PCI: device 01:0d.0 has unknown header type 7f, ignoring.
PCI: device 01:0f.0 has unknown header type 7f, ignoring.
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI edttyS00 at 0x1f000900 (irq = 0) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Found SAA9730 (PCI) at 0x10800000, irq 16.
SCSI subsystem driver Revision: 1.00
ncr53c8xx: at PCI bus 0, device 16, function 0
ncr53c8xx: 53c810a detected
ncr53c810a-0: rev 0x12 on pci bus 0 device 16 function 0 irq 17
ncr53c810a-0: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.3b-20010512
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IP-Config: Complete:
device=eth0, addr=4.42.102.6, mask=255.255.252.0, gw=4.42.102.1,
host=4.42.102.6, domain=, nis-domain=(none),
bootserver=4.42.102.7, rootserver=4.42.102.7, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 4.42.102.7
Looking up port of RPC 100005/1 on 4.42.102.7
Root-NFS: Server returned error -13 while mounting /export/RedHat7.1
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device "" or 02:00
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on 02:00
Let me why NFS server is returning error -13.
Thanks,
-Mike.
>From: Jan-Benedict Glaw <jbglaw@lug-owl.de>
>To: linux-mips@linux-mips.org
>Subject: Re: Linux for MIPS Atlas 4Kc board
>Date: Thu, 8 May 2003 23:40:57 +0200
>
>On Thu, 2003-05-08 10:02:54 -0700, Michael Anburaj
><michaelanburaj@hotmail.com>
>wrote in message <BAY1-F17fJpbi7Phnzi00006011@hotmail.com>:
> > Hi JBG,
> >
> > The MIPS box (Atlas running YAMON) has a fixed IP address assigned by
>me.
> > TFTP boot works fine. But this IP is held within the boot monitor
>program
> > (YAMON).
> >
> > YAMON> set
>[...]
>
>That doesn't help you. This is yamon, it's not Linux:)
>
> > Apart from the dynamic IP address assignment methods....
> > Suggest me a method to communicate this value to the RAM resident Linux
> > kernel. Or can I assign a fixed IP addredd by passing it as a parameter
>
>Look at ./linux/net/ipv4/ipconfig.c
>
> > when the linux kernel boots up? If so what is the syntax & please point
>me
>
>Yes.
>
> > to the document that has this info. about passed parameter when booting
>the
>
>The source file is the document, syntax is described there, too.
>
> > kernel.
>
>Please answer under old emails, not above them.
>
>HTH, JBG
>
>--
> Jan-Benedict Glaw jbglaw@lug-owl.de . +49-172-7608481
> "Eine Freie Meinung in einem Freien Kopf | Gegen Zensur | Gegen
>Krieg
> fuer einen Freien Staat voll Freier Bürger" | im Internet! | im
>Irak!
> ret = do_actions((curr | FREE_SPEECH) & ~(IRAQ_WAR_2 | DRM | TCPA));
><< attach3 >>
_________________________________________________________________
Help STOP SPAM with the new MSN 8 and get 2 months FREE*
http://join.msn.com/?page=features/junkmail
next reply other threads:[~2003-05-09 5:47 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-09 5:47 Michael Anburaj [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-05-13 7:31 Linux for MIPS Atlas 4Kc board Michael Anburaj
2003-05-10 21:07 Michael Anburaj
2003-05-10 15:56 Michael Anburaj
2003-05-10 19:49 ` Jan-Benedict Glaw
2003-05-10 4:57 Michael Anburaj
2003-05-10 5:44 ` Muthukumar Ratty
2003-05-10 5:44 ` Muthukumar Ratty
2003-05-10 10:30 ` Jan-Benedict Glaw
2003-05-09 18:34 Michael Anburaj
2003-05-09 6:31 Michael Anburaj
2003-05-09 8:25 ` Jan-Benedict Glaw
2003-05-08 17:02 Michael Anburaj
2003-05-08 21:40 ` Jan-Benedict Glaw
2003-05-08 10:09 Michael Anburaj
2003-05-08 11:20 ` Jan-Benedict Glaw
2003-05-05 8:26 Michael Anburaj
2003-05-05 21:52 ` Muthukumar Ratty
2003-05-05 21:52 ` Muthukumar Ratty
2003-05-05 0:27 Michael Anburaj
2003-05-05 2:21 ` Muthukumar Ratty
2003-05-05 2:21 ` Muthukumar Ratty
2003-05-01 8:53 Michael Anburaj
2003-04-30 8:56 Michael Anburaj
2003-04-30 7:13 Michael Anburaj
2003-04-30 7:24 ` Greg Lindahl
2003-04-30 4:00 Michael Anburaj
2003-04-30 4:06 ` Keith Owens
2003-04-29 19:40 Michael Anburaj
2003-04-29 20:00 ` Wolfgang Denk
2003-04-29 20:06 ` Muthukumar Ratty
2003-04-29 20:06 ` Muthukumar Ratty
[not found] <BAY1-F124jn04x29xDb00011e0b@hotmail.com>
2003-04-11 10:04 ` Geert Uytterhoeven
2003-04-11 9:48 Michael Anburaj
2003-04-11 9:24 Michael Anburaj
2003-04-11 9:28 ` Geert Uytterhoeven
2003-04-11 16:47 ` Jun Sun
2003-04-09 21:32 Michael Anburaj
2003-04-10 1:25 ` Ralf Baechle
2003-04-10 6:29 ` Jan-Benedict Glaw
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BAY1-F57ShEHR6jvPP600007b5b@hotmail.com \
--to=michaelanburaj@hotmail.com \
--cc=jbglaw@lug-owl.de \
--cc=linux-mips@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.