From: Frank Young <young726@hotmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] System hangs when Linux is loaded
Date: Wed, 30 Jun 2004 18:54:18 -0400 [thread overview]
Message-ID: <BAY2-F16fNtS5kJla9G0001ed04@hotmail.com> (raw)
Hi,
I have a Walnut board with ppc405. I have manged to install u-boot on the
board. I can download linux image (I am using Monta Vista one) too. But when
I tried to use "bootm", the system hanged after showing
"## Transferring control to Linux (at address 00000000) ..."
The following is the dump of serial console output. The uImage-uncomp is the
uncompressed linux image created with tools/mkimage, as explained in README
file. Does anyone have the same problem?
Thanks!
Frank
===================================================
=> tftp 400000 uImage-uncomp
ENET Speed is 100 Mbps - HALF duplex connection
TFTP from server 138.31.3.162; our IP address is 138.31.3.79
Filename 'uImage-uncomp'.
Load address: 0x400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#########
done
Bytes transferred = 1377116 (15035c hex)
=> imi 400000
## Checking Image at 00400000 ...
Image Name: Linux 2.2.4
Image Type: PowerPC Linux Kernel Image (uncompressed)
Data Size: 1377052 Bytes = 1.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
=> bootm 400000
## Booting image at 00400000 ...
Image Name: Linux 2.2.4
Image Type: PowerPC Linux Kernel Image (uncompressed)
Data Size: 1377052 Bytes = 1.3 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
OK
## Current stack ends at 0x00FBBBA8 => set upper limit to 0x00800000
## cmdline at 0x007FFF00 ... 0x007FFF48
bd address = 0x00FBBF90
memstart = 0x00000000
memsize = 0x01000000
flashstart = 0xFF800000
flashsize = 0x00400000
flashoffset = 0x00000000
sramstart = 0x00000000
sramsize = 0x00000000
bootflags = 0x0000A000
procfreq = 200 MHz
plb_busfreq = 100 MHz
pci_busfreq = 25 MHz
ethaddr = 00:00:48:B9:00:51
IP addr = 138.31.3.79
baudrate = 9600 bps
No initrd
## Transferring control to Linux (at address 00000000) ...
_________________________________________________________________
MSN 9 Dial-up Internet Access fights spam and pop-ups ? now 3 months FREE!
http://join.msn.click-url.com/go/onm00200361ave/direct/01/
next reply other threads:[~2004-06-30 22:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-06-30 22:54 Frank Young [this message]
2004-06-30 23:09 ` [U-Boot-Users] System hangs when Linux is loaded Shawn
2004-06-30 23:21 ` [U-Boot-Users] " Wolfgang Denk
-- strict thread matches above, loose matches on Subject: below --
2004-06-30 23:15 [U-Boot-Users] " Frank Young
2004-06-30 23:24 ` Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BAY2-F16fNtS5kJla9G0001ed04@hotmail.com \
--to=young726@hotmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.