From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Fri, 17 Feb 2006 06:37:41 -0800
Subject: Re: [Xenomai-help] no-brainer realtime issue
From: Steven Seeger <steve@domain.hid>
Message-ID: <C01B1FB5.2444%steve@domain.hid>
In-Reply-To: <43F5DD73.2030008@domain.hid>
Mime-version: 1.0
Content-type: text/plain;
	charset="US-ASCII"
Content-transfer-encoding: 7bit
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Philippe Gerum <rpm@xenomai.org>
Cc: "xenomai@xenomai.org" <xenomai@xenomai.org>

Hehe I misread that option. I read it as "disable SMI" and intended for it
to be on. I'll try that. :)

Steven 


On 2/17/06 6:28 AM, "Philippe Gerum" <rpm@xenomai.org> wrote:

> Steven Seeger wrote:
>> Maybe I didn't set it up right? I followed the instructions in the
>> README.INSTALL file. Attached is my linux tree's .config.
>> 
> 
> Try enabling the SMI workaround (Xeno's "Machine" menu), just in case, since
> you 
> are running a Geode box.
> 
>> Steven
>> 
>> 
>>> Until those numbers are sane, there is no point in trying anything else
>>> though.
>>> 
>>> Ok, the testsuite clearly fails on your board, and something in the current
>>> setup 
>>> prevents any real-time use. .config would help.
>>> 
>> 
>> 
>