From mboxrd@z Thu Jan 1 00:00:00 1970 From: "IT3 Stuart Blake Tener, USN" Subject: Re: BayPac BP-1 Modem and Linux Date: Fri, 20 Jul 2007 22:11:39 -0700 Message-ID: References: Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-hams@vger.kernel.org Cc: Bob Nielsen Bob: Indeed the more I learn about Ubuntu 7.04, the more I am impressed with its capabilities. I intend to attempt its installation on a Sun e450 later this month! V/R, Stuart, N3GWG On 7/20/07 7:48 PM, "Bob Nielsen" wrote: > > On Jul 20, 2007, at 6:37 PM, Doug wrote: > >> Is there anyway to connect a BayPac BP-1 modem to a linux system. I >> seem to find drivers >> for only the epp and usb variety. I need a modem to check my port >> configiration via the >> "LISTEN" command and I have run out unless I shut down the cluster >> and the bbs. >> Fbb is not loaded onto the system just yet. This is a new system >> (Mepis 6.5) and nothing >> else is loaded on to it yet except the ax25 stuff. The BP-1 is a >> serial device. > > My Ubuntu 7.04 stock kernel includes the baycom_ser_hdx.ko module. > If this one isn't included with Mepis, you need to recompile the > kernel and make sure the configuration file includes: > > CONFIG_BAYCOM_SER_HDX=m (or y) > > Bob, N7XY > > - > To unsubscribe from this list: send the line "unsubscribe linux-hams" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Very Respectfully, IT3 Stuart Blake Tener, USN Beverly Hills, California Amateur Radio Call Sign: N3GWG (Extra) email: teners@bh90210.net phone: +(1) 310.358.0202 (Beverly Hills, CA) phone: +(1) 215.338.6005 (Philadelphia, PA) phone: +(1) 702.988.3989 (Las Vegas, NV) E-Fax: +(1) 915.773.0935 (Telecopier) Military emails (checked monthly until remote NMCI access is secured) NIPRNET: stuart.tener@navy.mil / tenerstu@nro.mil SIPRNET: NONE TS/SCI: tenerstu@nro.ic.gov (GWAN) Confidentiality Notice: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and/or privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.