From: Grant Erickson <erick205@umn.edu>
To: "linuxppc-dev@ozlabs.org" <linuxppc-dev@ozlabs.org>
Subject: [PATCH] [POWERPC] 40X: Add Default Restart Machdep Method to 40X Platforms
Date: Fri, 22 Feb 2008 15:28:44 -0800 [thread overview]
Message-ID: <C3E49AAC.D8E4%erick205@umn.edu> (raw)
This patch restores the reset on restart functionality to 40x-based
platforms that was formerly provided--but not used in arch/powerpc--by
abort() in head_40x.S. This functionality is now provided by
ppc40x_reset_system(char *) in a fashion similar to that of the 44x-based
platforms.
Compiled, linked and tested against the AMCC Haleakala board.
Signed-off-by: Grant Erickson <gerickson@nuovations.com>
---
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/kernel/head_40x.S
linux-2.6.25-rc2-git1.N/arch/powerpc/kernel/head_40x.S
--- linux-2.6.25-rc2-git1/arch/powerpc/kernel/head_40x.S 2008-01-24
14:58:37.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/kernel/head_40x.S 2008-02-22
11:02:56.000000000 -0800
@@ -961,11 +961,6 @@
blr
-_GLOBAL(abort)
- mfspr r13,SPRN_DBCR0
- oris r13,r13,DBCR0_RST_SYSTEM@h
- mtspr SPRN_DBCR0,r13
-
_GLOBAL(set_context)
#ifdef CONFIG_BDI_SWITCH
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/40x.h
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/40x.h
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/40x.h 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/40x.h 2008-02-22
11:02:56.000000000 -0800
@@ -0,0 +1,6 @@
+#ifndef __POWERPC_PLATFORMS_40X_40X_H
+#define __POWERPC_PLATFORMS_40X_40X_H
+
+extern void ppc40x_reset_system(char *cmd);
+
+#endif /* __POWERPC_PLATFORMS_40X_40X_H */
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/ep405.c
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/ep405.c
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/ep405.c 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/ep405.c 2008-02-22
11:02:56.000000000 -0800
@@ -30,6 +30,8 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include "40x.h"
+
static struct device_node *bcsr_node;
static void __iomem *bcsr_regs;
@@ -119,5 +121,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc40x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/kilauea.c
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/kilauea.c
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/kilauea.c 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/kilauea.c
2008-02-22 11:02:56.000000000 -0800
@@ -21,6 +21,8 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include "40x.h"
+
static __initdata struct of_device_id kilauea_of_bus[] = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
@@ -54,5 +56,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc40x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/makalu.c
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/makalu.c
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/makalu.c 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/makalu.c
2008-02-22 11:02:56.000000000 -0800
@@ -21,6 +21,8 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include "40x.h"
+
static __initdata struct of_device_id makalu_of_bus[] = {
{ .compatible = "ibm,plb4", },
{ .compatible = "ibm,opb", },
@@ -54,5 +56,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc40x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/Makefile
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/Makefile
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/Makefile 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/Makefile
2008-02-22 11:02:56.000000000 -0800
@@ -1,3 +1,4 @@
+obj-$(CONFIG_40x) += misc_40x.o
obj-$(CONFIG_KILAUEA) += kilauea.o
obj-$(CONFIG_MAKALU) += makalu.o
obj-$(CONFIG_WALNUT) += walnut.o
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/misc_40x.S
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/misc_40x.S
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/misc_40x.S
1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/misc_40x.S
2008-02-22 15:19:14.000000000 -0800
@@ -0,0 +1,30 @@
+/*
+ * This file contains miscellaneous low-level functions for PPC 40x.
+ *
+ * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <asm/reg.h>
+#include <asm/ppc_asm.h>
+
+ .text
+
+/*
+ * void ppc40x_reset_system(char *cmd)
+ *
+ * At present, this just applies a system reset which, historically, when
+ * this routine existed as '_abort' in head_40x.S was sufficient for most
+ * systems.
+ */
+_GLOBAL(ppc40x_reset_system)
+ mfspr r13,SPRN_DBCR0
+ oris r13,r13,DBCR0_RST_SYSTEM@h
+ mtspr SPRN_DBCR0,r13
+ b . /* Just in case reset fails. */
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/virtex.c
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/virtex.c
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/virtex.c 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/virtex.c
2008-02-22 11:02:56.000000000 -0800
@@ -15,6 +15,8 @@
#include <asm/time.h>
#include <asm/xilinx_intc.h>
+#include "40x.h"
+
static struct of_device_id xilinx_of_bus_ids[] __initdata = {
{ .compatible = "xlnx,plb-v46-1.00.a", },
{ .compatible = "xlnx,plb-v34-1.01.a", },
@@ -48,5 +50,6 @@
.probe = virtex_probe,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
- .calibrate_decr = generic_calibrate_decr,
+ .restart = ppc40x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
};
diff -rauN linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/walnut.c
linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/walnut.c
--- linux-2.6.25-rc2-git1/arch/powerpc/platforms/40x/walnut.c 2008-02-22
11:07:53.000000000 -0800
+++ linux-2.6.25-rc2-git1.N/arch/powerpc/platforms/40x/walnut.c
2008-02-22 11:02:56.000000000 -0800
@@ -27,6 +27,8 @@
#include <asm/uic.h>
#include <asm/pci-bridge.h>
+#include "40x.h"
+
static __initdata struct of_device_id walnut_of_bus[] = {
{ .compatible = "ibm,plb3", },
{ .compatible = "ibm,opb", },
@@ -61,5 +63,6 @@
.progress = udbg_progress,
.init_IRQ = uic_init_tree,
.get_irq = uic_get_irq,
+ .restart = ppc40x_reset_system,
.calibrate_decr = generic_calibrate_decr,
};
next reply other threads:[~2008-02-22 23:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 23:28 Grant Erickson [this message]
2008-02-23 16:37 ` [PATCH] [POWERPC] 40X: Add Default Restart Machdep Method to 40X Platforms Josh Boyer
2008-03-01 11:32 ` Stefan Roese
2008-03-01 13:15 ` Josh Boyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=C3E49AAC.D8E4%erick205@umn.edu \
--to=erick205@umn.edu \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.