From: Glen Wernersbach <glen@domain.hid>
To: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Cc: "xenomai@xenomai.org" <xenomai@xenomai.org>
Subject: Re: [Xenomai-help] Linux Serial Does not work with CONFIG_XENO_OPT_PERVASIVE enabled
Date: Mon, 26 Mar 2012 01:27:18 -0400 [thread overview]
Message-ID: <CB957676.1F007%glen@domain.hid> (raw)
In-Reply-To: <4F6986AD.9050201@domain.hid>
I figured out the fix. There was a hard coded minor number for a misc device
register for the GPIO.
For some reason PERVASIVE conflicted with it.
Changed it to dynamic assign ID and it worked fine.
Linux serial now works.
On 3/21/12 3:43 AM, "Gilles Chanteperdrix"
<gilles.chanteperdrix@xenomai.org> wrote:
> On 03/21/2012 05:46 AM, Glen Wernersbach wrote:
>> I am going to start trying to see if I can figure out what is not getting
>> set.
>>
>> By the way. This board also has 4 other serial ports on a 8250.c driver. It
>> also fails under the xeno build.
>
> But the serial console works, right? So there is at least on serial port
> working.
--
Glen Wernersbach
President & CTO
Jetsoft Development Co.
629 Old St Rt. 74 Suite 210
Cincinnati, Oh 45244
Custom Programming Web Site: www.jetsoftdev.com
Retail Products Web Site: www.scanhelp.com
Phone: 513-528-6660
Fax: 513-528-3470
Cell 513-240-9929
----
Partner for Software Technology
Jacobs Automation
2365 Progress Drive
Hebron, KY 41048
(513) 297-7550
----
"Support Dyslexia Research"
next prev parent reply other threads:[~2012-03-26 5:27 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-20 13:28 [Xenomai-help] Linux Serial Does not work with CONFIG_XENO_OPT_PERVASIVE enabled Glen Wernersbach
2012-03-20 13:44 ` Philippe Gerum
2012-03-20 13:48 ` Glen Wernersbach
2012-03-20 13:57 ` Philippe Gerum
2012-03-20 14:07 ` Glen Wernersbach
2012-03-20 14:14 ` Philippe Gerum
2012-03-20 14:17 ` Philippe Gerum
2012-03-20 14:31 ` Philippe Gerum
2012-03-20 14:34 ` Glen Wernersbach
2012-03-20 14:47 ` Philippe Gerum
2012-03-20 14:53 ` Glen Wernersbach
2012-03-20 15:06 ` Philippe Gerum
2012-03-20 15:17 ` Glen Wernersbach
2012-03-20 15:24 ` Gilles Chanteperdrix
2012-03-20 15:27 ` Philippe Gerum
2012-03-20 16:09 ` Glen Wernersbach
2012-03-20 15:12 ` Gilles Chanteperdrix
2012-03-20 15:22 ` Glen Wernersbach
2012-03-20 15:26 ` Gilles Chanteperdrix
2012-03-20 16:40 ` Glen Wernersbach
2012-03-20 19:38 ` Gilles Chanteperdrix
2012-03-20 20:19 ` Glen Wernersbach
2012-03-20 20:35 ` Gilles Chanteperdrix
2012-03-20 21:20 ` Glen Wernersbach
2012-03-20 21:41 ` Philippe Gerum
2012-03-21 4:46 ` Glen Wernersbach
2012-03-21 7:43 ` Gilles Chanteperdrix
2012-03-21 13:21 ` Glen Wernersbach
2012-03-26 5:27 ` Glen Wernersbach [this message]
2012-03-21 8:38 ` Philippe Gerum
2012-03-21 14:41 ` Glen Wernersbach
2012-03-21 15:07 ` Philippe Gerum
2012-03-21 16:53 ` Glen Wernersbach
2012-03-20 16:22 ` Philippe Gerum
2012-03-20 16:32 ` Glen Wernersbach
2012-03-20 16:42 ` Gilles Chanteperdrix
2012-03-20 16:48 ` Glen Wernersbach
2012-03-20 14:50 ` Gilles Chanteperdrix
2012-03-20 14:59 ` Glen Wernersbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CB957676.1F007%glen@domain.hid \
--to=glen@domain.hid \
--cc=gilles.chanteperdrix@xenomai.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.