From mboxrd@z Thu Jan  1 00:00:00 1970
Date: Thu, 13 Sep 2012 15:30:24 -0400
From: Glen Wernersbach <glen@jetsoftdev.com>
Message-ID: <CC77AC90.21DF3%glen@jetsoftdev.com>
Mime-version: 1.0
Content-Type: text/plain;
	charset="ISO-8859-1"
Content-Transfer-Encoding: quoted-printable
Subject: [Xenomai] USB 3.0 on Xenomai
List-Id: Discussions about the Xenomai project <xenomai.xenomai.org>
List-Unsubscribe: <http://www.xenomai.org/mailman/options/xenomai>,
	<mailto:xenomai-request@xenomai.org?subject=unsubscribe>
List-Archive: <http://www.xenomai.org/pipermail/xenomai>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-request@xenomai.org?subject=help>
List-Subscribe: <http://www.xenomai.org/mailman/listinfo/xenomai>,
	<mailto:xenomai-request@xenomai.org?subject=subscribe>
To: xenomai@xenomai.org

Hi All,

Back to this question.

If I wanted to write a very specific one trick pony RTDM driver for a USB
3.0 controller that would do basic read and writes to my vendor specific
device where would I start?

I just need them to run in real time.


Glen
--=20
Glen Wernersbach
President & CTO

Jetsoft Development Co.
629 Old St Rt. 74 =AD Suite 210
Cincinnati, Oh 45244
Custom Programming Web Site: www.jetsoftdev.com
Retail Products Web Site: www.scanhelp.com
Phone:   513-528-6660
Fax: 513-528-3470
Cell 513-240-9929
----
Partner for Software Technology
Jacobs Automation
2365 Progress Drive
Hebron, KY 41048=20
(513) 297-7550
----
"Support Dyslexia Research"