All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hullen@t-online.de (Helmut Hullen)
To: linux-btrfs@vger.kernel.org
Subject: Re: Option LABEL
Date: 03 Jan 2013 21:28:00 +0100	[thread overview]
Message-ID: <CO8jEAMeCXB@helmut.hullen.de> (raw)
In-Reply-To: <1CC7957D-2FAD-4E8D-9850-6A06458FF1ED@colorremedies.com>

[-- Attachment #1: Type: text/plain, Size: 1575 bytes --]

Hallo, Chris,

Du meintest am 03.01.13:

> So 'btrfs fi label' relabeling with an unmounted system changes the
> file system label metadata on all member devices, according to btrfs
> fi label. Now when I use file:

On my system (a bundle of /dev/sdb, /dev/sdc, /dev/sdd)

        btrfs fi label /dev/sdb mylabel

only sets the label on the (unmounted) device /dev/sdb. "/dev/sdc" and  
"/dev/sdd" remain without label.


> # file -s /dev/sdb
> /dev/sdb: BTRFS Filesystem (label "test2", sectorsize 4096, nodesize
> 4096, leafsize 4096)
> # file -s /dev/sdc
> /dev/sdc: BTRFS Filesystem (label "test2", sectorsize 4096, nodesize
> 4096, leafsize 4096)

> Again it correctly reports the label, even though I had only changed
> the label on sdc (which actually is improper language, I changed the
> label on the file system implied by device sdc which also extends to
> device sdb).

Strange.
Actually the btrfs system is mounted and has to run a job with needs  
about 5 days - I may not stop it.

But before the first mounting of the system only "/dev/sdb" showed the  
label. Maybe with the first mounting the label spreads over all disks.


>
> And then for blkid:

> # blkid
> /dev/sdb: LABEL="test2" UUID="3d5390d0-a41b-4f70-a4e5-b47295d3c717"
> UUID_SUB="a5bbaa83-6d6f-45dc-9804-9442350c3bc9" TYPE="btrfs"
> /dev/sdc: LABEL="test2" UUID="3d5390d0-a41b-4f70-a4e5-b47295d3c717"
> UUID_SUB="01e0bc77-cfdf-4bd7-bfd3-05e14affa66a" TYPE="btrfs"

Strange - in another way.

Here "blkid" (without any device) hangs. See the attachment ("strace  
blkid").

Viele Gruesse!
Helmut

[-- Attachment #2: blkid-trace.log --]
[-- Type: text/plain, Size: 6525 bytes --]

execve("/sbin/blkid", ["blkid"], [/* 47 vars */]) = 0
brk(0)                                  = 0x8050000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40024000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=55572, ...}) = 0
mmap2(NULL, 55572, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40025000
close(3)                                = 0
open("/lib/libblkid.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0A\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=163440, ...}) = 0
mmap2(NULL, 162160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40033000
mmap2(0x40059000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x26) = 0x40059000
close(3)                                = 0
open("/lib/libuuid.so.1", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0p\16\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=13244, ...}) = 0
mmap2(NULL, 16004, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005b000
mmap2(0x4005e000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x2) = 0x4005e000
close(3)                                = 0
open("/lib/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\0\227\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1790836, ...}) = 0
mmap2(NULL, 1591836, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000
mprotect(0x401dd000, 4096, PROT_NONE)   = 0
mmap2(0x401de000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x17e) = 0x401de000
mmap2(0x401e1000, 10780, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401e1000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x401e4000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x401e5000
set_thread_area({entry_number:-1 -> 6, base_addr:0x401e4bc0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0x401de000, 8192, PROT_READ)   = 0
mprotect(0x40021000, 4096, PROT_READ)   = 0
munmap(0x40025000, 55572)               = 0
brk(0)                                  = 0x8050000
brk(0x8071000)                          = 0x8071000
getuid32()                              = 0
geteuid32()                             = 0
getgid32()                              = 0
getegid32()                             = 0
prctl(PR_GET_DUMPABLE)                  = 1
getuid32()                              = 0
geteuid32()                             = 0
getgid32()                              = 0
getegid32()                             = 0
prctl(PR_GET_DUMPABLE)                  = 1
open("/etc/blkid.conf", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
open("/run/blkid/blkid.tab", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1212, ...}) = 0
fcntl64(3, F_GETFL)                     = 0x8000 (flags O_RDONLY|O_LARGEFILE)
fstat64(3, {st_mode=S_IFREG|0644, st_size=1212, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40025000
_llseek(3, 0, [0], SEEK_CUR)            = 0
read(3, "<device DEVNO=\"0x0801\" TIME=\"135"..., 4096) = 1212
access("/dev/sda1", F_OK)               = 0
access("/dev/sda2", F_OK)               = 0
access("/dev/sda3", F_OK)               = 0
access("/dev/sda4", F_OK)               = 0
access("/dev/sdb5", F_OK)               = 0
access("/dev/sdb", F_OK)                = 0
access("/dev/sdc", F_OK)                = 0
access("/dev/sdd", F_OK)                = 0
read(3, "", 4096)                       = 0
_llseek(3, 1212, [1212], SEEK_SET)      = 0
close(3)                                = 0
munmap(0x40025000, 4096)                = 0
open("/run/blkid/blkid.tab", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=1212, ...}) = 0
close(3)                                = 0
open("/proc/evms/volumes", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/proc/lvm/VGs", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/dev", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = 3
getdents64(3, /* 1115 entries */, 32768) = 32744
getdents64(3, /* 666 entries */, 32768) = 21160
getdents64(3, /* 0 entries */, 32768)   = 0
close(3)                                = 0
openat(AT_FDCWD, "/devfs", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
openat(AT_FDCWD, "/devices", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY|O_CLOEXEC) = -1 ENOENT (No such file or directory)
open("/proc/partitions", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40025000
read(3, "major minor  #blocks  name\n\n   2"..., 1024) = 412
stat64("/dev/fd0", {st_mode=S_IFBLK|0660, st_rdev=makedev(2, 0), ...}) = 0
access("/dev/fd0", F_OK)                = 0
time(NULL)                              = 1357238073
stat64("/dev/fd0", {st_mode=S_IFBLK|0660, st_rdev=makedev(2, 0), ...}) = 0
open("/dev/fd0", O_RDONLY|O_LARGEFILE)  = 4
fadvise64_64(4, 0, 0, POSIX_FADV_RANDOM) = 0
fstat64(4, {st_mode=S_IFBLK|0660, st_rdev=makedev(2, 0), ...}) = 0
uname({sys="Linux", node="izar", ...})  = 0
ioctl(4, BLKGETSIZE64, 0x8050d5c)       = 0
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4, 0x80517a4, 1024)                = -1 EIO (Input/output error)
_llseek(4, 0, [0], SEEK_SET)            = 0
read(4,  <unfinished ...>

  reply	other threads:[~2013-01-03 20:36 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-03 15:14 Option LABEL Helmut Hullen
2013-01-03 16:08 ` Hugo Mills
2013-01-03 16:29   ` Helmut Hullen
2013-01-03 17:01     ` Hugo Mills
2013-01-03 17:43       ` james northrup
2013-01-03 17:57       ` Helmut Hullen
2013-01-03 18:10         ` cwillu
2013-01-03 18:20           ` Helmut Hullen
2013-01-03 19:18             ` Chris Murphy
2013-01-03 19:35               ` Chris Murphy
2013-01-03 20:28                 ` Helmut Hullen [this message]
2013-01-03 21:23                   ` Hugo Mills
2013-01-03 21:27                     ` Chris Murphy
2013-01-03 22:07                       ` Helmut Hullen
2013-01-03 21:52                     ` Helmut Hullen
2013-01-06 16:02                       ` Goffredo Baroncelli
2013-01-04 12:11                     ` Helmut Hullen
2013-01-04 20:59                     ` Helmut Hullen
2013-01-04 21:41                       ` Chris Murphy
2013-01-03 19:59               ` Helmut Hullen
2013-01-03 21:17                 ` Chris Murphy
2013-01-04 12:56                   ` Helmut Hullen
2013-01-03 18:33         ` Hugo Mills
2013-01-03 19:08           ` Helmut Hullen
2013-01-03 19:28             ` Hugo Mills
2013-01-03 20:18               ` Helmut Hullen
2013-01-05 11:36                 ` Martin Steigerwald
2013-01-05 12:44                   ` Helmut Hullen
2013-01-05 19:08                     ` Chris Murphy
2013-01-05 13:15   ` Helmut Hullen
2013-01-05 19:10     ` Chris Murphy
2013-01-05 19:13       ` Hugo Mills
2013-01-05 21:03       ` Helmut Hullen
2013-01-05 21:21         ` Chris Murphy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CO8jEAMeCXB@helmut.hullen.de \
    --to=hullen@t-online.de \
    --cc=helmut@hullen.de \
    --cc=linux-btrfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.