RE: Port forward

[ASC - Ronald Roeleveld <r.roeleveld@ascinternational.nl>]

[-- Attachment #1: Type: text/plain, Size: 2918 bytes --]

Thanks a lot the error message is gone now,
after I changed the line to:
iptables -t nat -A PREROUTING -p tcp --destination-port 25 -i eth0 -j DNAT
--to-destination 192.168.22.6:25

But when I do iptables --list
I dont see any entrys in the chain for PREROUTING

Chain INPUT (policy ACCEPT)
target     prot opt source               destination
ACCEPT     tcp  --  192.168.32.6         anywhere           tcp dpt:ssh
ACCEPT     udp  --  192.168.32.6         anywhere           udp dpt:ssh
ACCEPT     tcp  --  192.168.22.6         anywhere           tcp dpt:ssh
ACCEPT     udp  --  192.168.22.6         anywhere           udp dpt:ssh
ACCEPT     tcp  --  thamaster.xs4all.nl  anywhere           tcp dpt:ssh
ACCEPT     udp  --  thamaster.xs4all.nl  anywhere           udp dpt:ssh
ACCEPT     tcp  --  192.168.22.0/24      anywhere           tcp dpt:www
ACCEPT     udp  --  192.168.22.0/24      anywhere           udp dpt:www
ACCEPT     tcp  --  localnet/24          anywhere           tcp dpt:www
ACCEPT     udp  --  localnet/24          anywhere           udp dpt:www
ACCEPT     all  --  anywhere             anywhere
DROP       tcp  --  anywhere             anywhere           tcp
flags:SYN,RST,ACK/SYN

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination
TCPMSS     tcp  --  anywhere             anywhere           tcp
flags:SYN,RST/SYN TCPMSS clamp to PMTU
ACCEPT     all  --  anywhere             anywhere           state
ESTABLISHED

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
TCPMSS     tcp  --  anywhere             anywhere           tcp
flags:SYN,RST/SYN TCPMSS clamp to PMTU
TCPMSS     tcp  --  anywhere             anywhere           tcp
flags:SYN,RST/SYN TCPMSS clamp to PMTU

Chain PREROUTING (0 references)
target     prot opt source               destination

Regards,



Ronald Roeleveld 
System Administrator 

ASCINTERNATIONAL 
Vlietweg 17c, 2266 KA, Leidschendam, The Netherlands 
Tel. +31 (0)70 3178400, Fax +31 (0)70 3204760
E-mail: r.roeleveld@ascinternational.nl
<mailto:r.roeleveld@ascinternational.nl> , Website:
http://www.ascinternational.nl <http://www.ascinternational.nl>  

 
 
 


-----Original Message-----
From: Eric Leblond [ mailto:eleblond@init-sys.com
<mailto:eleblond@init-sys.com> ]
Sent: dinsdag 4 februari 2003 11:49
To: ASC - Ronald Roeleveld
Subject: Re: Port forward


On Tue, 2003-02-04 at 11:31, ASC - Ronald Roeleveld wrote:
> Hi all,
> 
> Iam trying to set up a port forward for several hours now, but I don't
> seem to get it working right.
> When I type the following command:
> iptables -A PREROUTING -p tcp --destination-port 25 -i eth0 -j DNAT
> --to-destination 192.168.22.6:25

you forget to specify that you work on the NAT table so add
-t nat
ou your line

--
Éric Leblond
courriel : eleblond@init-sys.com



[-- Attachment #2: Type: text/html, Size: 6316 bytes --]