From: "Sujith Sankar (ssujith)" <ssujith-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
To: "dev-VfR2kkLFssw@public.gmane.org" <dev-VfR2kkLFssw@public.gmane.org>
Subject: Re: [PATCH] enicpmd: compilation error during inclusion of vfio.h
Date: Thu, 27 Nov 2014 17:22:31 +0000 [thread overview]
Message-ID: <D09D5B5D.28F99%ssujith@cisco.com> (raw)
In-Reply-To: <1417108480-28341-1-git-send-email-ssujith-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
On 27/11/14 10:44 pm, "Sujith Sankar (ssujith)" <ssujith-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org> wrote:
>Inclusion of vfio.h was giving compilation errors if kernel version is
>less
>than 3.6.0 and if RTE_EAL_VFIO was on in config.
>
>Replaced inclusion of vfio.h with eal_vfio.h and replaced RTE_EAL_VFIO
>with
>VFIO_PRESENT in enicpmd code.
eal_vfio.h is not included. The inclusion of vfio.h is removed. Sorry
for the error in the description.
>
>Signed-off-by: Sujith Sankar <ssujith-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
>---
> lib/librte_pmd_enic/Makefile | 1 +
> lib/librte_pmd_enic/enic_main.c | 13 +++++--------
> 2 files changed, 6 insertions(+), 8 deletions(-)
>
>diff --git a/lib/librte_pmd_enic/Makefile b/lib/librte_pmd_enic/Makefile
>index d4c2f66..befc552 100644
>--- a/lib/librte_pmd_enic/Makefile
>+++ b/lib/librte_pmd_enic/Makefile
>@@ -39,6 +39,7 @@ LIB = librte_pmd_enic.a
>
> CFLAGS += -I$(RTE_SDK)/lib/librte_hash/
>-I$(RTE_SDK)/lib/librte_pmd_enic/vnic/
> CFLAGS += -I$(RTE_SDK)/lib/librte_pmd_enic/
>+CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal/
> CFLAGS += -O3 -Wno-deprecated
>
> VPATH += $(RTE_SDK)/lib/librte_pmd_enic/src
>diff --git a/lib/librte_pmd_enic/enic_main.c
>b/lib/librte_pmd_enic/enic_main.c
>index 4b857bb..f6f00d3 100644
>--- a/lib/librte_pmd_enic/enic_main.c
>+++ b/lib/librte_pmd_enic/enic_main.c
>@@ -39,9 +39,6 @@
> #include <sys/mman.h>
> #include <fcntl.h>
> #include <libgen.h>
>-#ifdef RTE_EAL_VFIO
>-#include <linux/vfio.h>
>-#endif
>
> #include <rte_pci.h>
> #include <rte_memzone.h>
>@@ -631,7 +628,7 @@ int enic_enable(struct enic *enic)
>
> vnic_dev_enable_wait(enic->vdev);
>
>-#ifndef RTE_EAL_VFIO
>+#ifndef VFIO_PRESENT
> /* Register and enable error interrupt */
> rte_intr_callback_register(&(enic->pdev->intr_handle),
> enic_intr_handler, (void *)enic->rte_dev);
>@@ -995,7 +992,7 @@ int enic_setup_finish(struct enic *enic)
> return 0;
> }
>
>-#ifdef RTE_EAL_VFIO
>+#ifdef VFIO_PRESENT
> static void enic_eventfd_init(struct enic *enic)
> {
> enic->eventfd = enic->pdev->intr_handle.fd;
>@@ -1033,7 +1030,7 @@ int enic_get_link_status(struct enic *enic)
> }
>
>
>-#ifdef RTE_EAL_VFIO
>+#ifdef VFIO_PRESENT
> static int enic_create_err_intr_thread(struct enic *enic)
> {
> pthread_attr_t intr_attr;
>@@ -1111,7 +1108,7 @@ static void enic_dev_deinit(struct enic *enic)
> if (eth_dev->data->mac_addrs)
> rte_free(eth_dev->data->mac_addrs);
>
>-#ifdef RTE_EAL_VFIO
>+#ifdef VFIO_PRESENT
> enic_clear_intr_mode(enic);
> #endif
> }
>@@ -1167,7 +1164,7 @@ static int enic_dev_init(struct enic *enic)
> */
> enic_get_res_counts(enic);
>
>-#ifdef RTE_EAL_VFIO
>+#ifdef VFIO_PRESENT
> /* Set interrupt mode based on resource counts and system
> * capabilities
> */
>--
>1.9.1
>
next prev parent reply other threads:[~2014-11-27 17:22 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-11-27 17:14 [PATCH] enicpmd: compilation error during inclusion of vfio.h Sujith Sankar
[not found] ` <1417108480-28341-1-git-send-email-ssujith-FYB4Gu1CFyUAvxtiuMwx3w@public.gmane.org>
2014-11-27 17:22 ` Sujith Sankar (ssujith) [this message]
2014-11-27 18:01 ` Thomas Monjalon
2014-11-27 20:24 ` Thomas Monjalon
2014-11-28 2:31 ` Sujith Sankar (ssujith)
2014-11-28 2:09 ` Qiu, Michael
[not found] ` <533710CFB86FA344BFBF2D6802E60286C9B11F-0J0gbvR4kThpB2pF5aRoyrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2014-11-28 14:16 ` Thomas Monjalon
2014-12-02 7:10 ` Qiu, Michael
2014-11-28 14:56 ` Neil Horman
2014-12-02 7:24 ` Qiu, Michael
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=D09D5B5D.28F99%ssujith@cisco.com \
--to=ssujith-fyb4gu1cfyuavxtiumwx3w@public.gmane.org \
--cc=dev-VfR2kkLFssw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.