All of lore.kernel.org
 help / color / mirror / Atom feed
From: Colin Smiley <csmiley@icontrol.com>
To: OpenEmbedded Devel List
	<openembedded-devel@lists.openembedded.org>,
	"Alex de Cabo" <alejandro.de-cabo-garcia@congatec.com>,
	Max Krummenacher <max.oss.09@gmail.com>,
	Henning Heinold <heinold@inf.fu-berlin.de>
Subject: Re: Query on meta-java layer openjdk-7-jre build
Date: Thu, 15 Jan 2015 00:23:49 +0000	[thread overview]
Message-ID: <D0DC62E4.8BDA%csmiley@icontrol.com> (raw)
In-Reply-To: <CAP9ODKpZzfTV41SDZjacbMi9=_BKkA7AoTgU+az4+7oUDreB3Q@mail.gmail.com>


Earlier this week, I’d sent an email to the list about my problems getting
openjdk-6 to build.

The short version of my build process is:

1) install poky on daisy branch
2) install open embedded on daisy branch
3) install meta-java on trunk
4) attempt to bitbake java-test-image (removing openjdk-7 line).
5) Wait for java CurrencyData failure, fix it manually.
6) re-reun bitbake java-test-image

At this point, my build fails running qemu-i36. The image will use up all
available memory on the system, and then get killed by the linux oom
killer. I have tried this on a variety of OS, VM, physical machine, and
memory combinations. The result is always the same.

Is the problem I’m seeing the same as what you’re describing below?

Also, is there an update to meta-java to fix the CurrencyData problem?


Thanks,


Colin

On 1/14/15, 6:11 PM, "Otavio Salvador" <otavio@ossystems.com.br> wrote:

>Hello,
>
>(I am adding Alex on Cc as well)
>
>On Wed, Jan 14, 2015 at 9:52 PM, Max Krummenacher <max.oss.09@gmail.com>
>wrote:
>> Otavio Salvador <otavio <at> ossystems.com.br> writes:
>>>  Can you prepare a patchset for it?
>>>
>>
>> I'm not really convinced that reverting the static linking is a good
>> approach as obviously something failed when linking dynamically.
>>
>> Both mails which reported the issue with the failing qemu-arm run were
>>built
>> for colibri-t20. The Tegra T20 SOC is a bit special as it does not have
>>a
>> Neon unit. Plus our standard setup uses angstrom which builds the linaro
>> toolchain with thumb2 support.
>>
>> So the failing builds are failing with an unusual oe toolchain
>>configuration
>> and the root cause is the toolchain.
>> I'm unsure if risking the failing builds with dynamic linking poping up
>> again justifies fixing the build failures in an unusual configuration.
>>
>> If you don't think so I can prepare a patch, no problem.
>
>It is failing on me as well.
>
>Alex has found that QEMU -L command is causing issue so if your patch
>fixes it, it could be an option for sure.
>
>I think there's no good answer as a patch for test. :-) I think we all
>can try it and see if it improves it after all.
>
>-- 
>Otavio Salvador                             O.S. Systems
>http://www.ossystems.com.br        http://code.ossystems.com.br
>Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
>-- 
>_______________________________________________
>Openembedded-devel mailing list
>Openembedded-devel@lists.openembedded.org
>http://lists.openembedded.org/mailman/listinfo/openembedded-devel


  reply	other threads:[~2015-01-15  0:56 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <54B220B0.8070609@gmail.com>
2015-01-11  7:14 ` Query on meta-java layer openjdk-7-jre build Victor Ascroft
2015-01-11 15:24   ` Henning Heinold
2015-01-21  9:49     ` Iorga, Cristian
2015-01-13 13:02   ` Max Krummenacher
2015-01-13 13:24     ` Henning Heinold
2015-01-13 17:55       ` Otavio Salvador
2015-01-14 23:52         ` Max Krummenacher
2015-01-15  0:11           ` Otavio Salvador
2015-01-15  0:23             ` Colin Smiley [this message]
2015-01-15  9:22               ` Henning Heinold
2015-01-15  9:57               ` Max Krummenacher
2015-01-15 11:29             ` Max Krummenacher
2015-01-15 20:51               ` Max Krummenacher
2015-01-19 11:56                 ` Max Krummenacher
2015-01-19 12:41                   ` Otavio Salvador
2015-01-19 18:43                     ` Colin Smiley
2015-01-19 19:37                       ` Otavio Salvador
2015-01-19 19:38                       ` Max Krummenacher
2015-01-20 15:21                     ` Max Krummenacher

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D0DC62E4.8BDA%csmiley@icontrol.com \
    --to=csmiley@icontrol.com \
    --cc=alejandro.de-cabo-garcia@congatec.com \
    --cc=heinold@inf.fu-berlin.de \
    --cc=max.oss.09@gmail.com \
    --cc=openembedded-devel@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.