Re: [OE-core] [PATCH 3/3] oeqa selftest uboot.py: add qemu KVM test case

["Mathieu Dubois-Briand" <mathieu.dubois-briand@bootlin.com>]

[-- Attachment #1.1: Type: text/plain, Size: 2343 bytes --]

On Tue May 27, 2025 at 9:43 AM CEST, Mathieu Dubois-Briand wrote:
> On Tue May 27, 2025 at 9:17 AM CEST, Mikko Rapeli wrote:
>> Hi,
>>
>> On Tue, May 27, 2025 at 08:34:52AM +0200, Mathieu Dubois-Briand wrote:
>>> On Mon May 26, 2025 at 10:45 AM CEST, Mikko Rapeli wrote:
>>> > On Fri, May 23, 2025 at 05:16:58PM +0300, Mikko Rapeli via lists.openembedded.org wrote:
>>> >
>>> > I reviewed the runqemu and qemu-system-aarch64 arguments but could not see major differences.
>>> > One difference is that autobuilder runs with tap and I with slirp networking, but that
>>> > should not affect rootfs/ESP partition detection in u-boot. I've sent out v4 now.
>>> > If this still fails on autobuilder, then I'd need know what config fragments
>>> > are applied. I've configured qemuarm64 and genericarm64 with
>>> > ". oe-init-build-env" and then added TEST_RUNQEMUPARAMS += "slirp"
>>> > and SANITY_TESTED_DISTROS = "" to conf/local.conf. Maybe autobuilder
>>> > scripts add something more.
>>> >
>>> > Cheers,
>>> >
>>> > -Mikko
>>> 
>>> Hi Mikko,
>>> 
>>> Thanks for the new version, but I confirm it still fails.
>>> 
>>> https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/1772
>>
>> Is it possible to grab the full boot log
>> /srv/pokybuild/yocto-worker/oe-selftest-armhost/build/build-st-1032659/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250526163143 ?
>>
>> It was referred in
>> https://autobuilder.yoctoproject.org/valkyrie/api/v2/logs/2499407/raw_inline
>>
>
> The file is gone :(
>
> I will launch a new build so I can capture the file.

New build. There is also a failure on bitbake selftest here, but it
seems to be an unrelated intermittent issue.

https://autobuilder.yoctoproject.org/valkyrie/#/builders/23/builds/1778

I believe the file you are looking for is
/srv/pokybuild/yocto-worker/oe-selftest-armhost/build/build-st-932426/tmp/work/qemuarm64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250527082811.2,
I'm attaching it to my mail. But I'm not sure there is more data than
what you already had.

I will try to backup the whole build directory once the build is done,
in the case you need some other file.

-- 
Mathieu Dubois-Briand, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com


[-- Attachment #2: qemu_boot_log.20250527082811.2 --]
[-- Type: application/octet-stream, Size: 1733 bytes --]