Re: [PATCH 2/3] arm64: dts: ti: k3-am62p-j722s: enable the bxs-4-64

[Randolph Sapp <rs@ti.com>]

On Wed Aug 13, 2025 at 1:42 PM CDT, Nishanth Menon wrote:
> On 12:56-20250813, Randolph Sapp wrote:
> [...]
>
>> >> +		reg = <0x00 0x0fd80000 0x00 0x80000>;
>> >> +		clocks = <&k3_clks 237 1>;
>> >> +		clock-names = "core";
>> >> +		assigned-clocks = <&k3_clks 237 1>;
>> >> +		assigned-clock-rates = <800000000>;
>
> btw, as per https://www.ti.com/lit/ds/symlink/tda4aen-q1.pdf (page 86)
> 720MHz when vdd_core is 0.75v (default)
> and 800MHz when vdd_core is 0.85v
>
> 0.85v is set in the board dts and higher OPPs are enabled depending on
> board capability.
>
> You might want to check the assigned-clock-rates based on data sheet,
> default should'nt need a assigned-clock-rate.

Are you suggesting that we set assigned-clock-rates in the board dts instead, or
do you just want to do away with assigned-clock-rates in general and eat the
perf difference?