Re: [PATCH v2 03/20] drm/tilcdc: Remove simulate_vesa_sync flag

["Luca Ceresoli" <luca.ceresoli@bootlin.com>]

Hi Köry,

On Thu Dec 11, 2025 at 5:38 PM CET, Kory Maincent (TI.com) wrote:
> The tilcdc hardware does not generate VESA-compliant sync signals. It
> aligns the vertical sync (VS) on the second edge of the horizontal sync
> (HS) instead of the first edge. To compensate for this hardware
> behavior, the driver applies a timing adjustment in mode_fixup().
>
> Previously, this adjustment was conditional based on the simulate_vesa_sync
> flag, which was only set when using external encoders. This appears
> problematic because:
>
> 1. The timing adjustment seems needed for the hardware behavior regardless
>    of whether an external encoder is used
> 2. The external encoder infrastructure is driver-specific and being
>    removed due to design issues
> 3. Boards using tilcdc without bridges (e.g., am335x-evm, am335x-evmsk)
>    may not be getting the necessary timing adjustments
>
> Remove the simulate_vesa_sync flag and apply the VESA sync timing
> adjustment unconditionally, ensuring consistent behavior across all
> configurations. While it's unclear if the previous conditional behavior
> was causing actual issues, the unconditional adjustment better reflects
> the hardware's characteristics.
>
> Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>

Code looks good. Based on your testing, which covered both boards currently
setting simulate_vesa_sync and boards not setting it:

Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>

Still it would be good to have this series, and especially this patch,
tested by someone having access to other TI boards.

--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com