From: "Brian Padalino" <bpadalino@perigee.com>
To: "Linuxppc-Embedded" <linuxppc-embedded@lists.linuxppc.org>
Subject: U-Boot, tftp and PCI ethernet
Date: Fri, 25 Jul 2003 08:10:49 -0400 [thread overview]
Message-ID: <DGEEIPOFGGPOACEFBGGCGEJFCAAA.bpadalino@perigee.com> (raw)
Does U-Boot support booting over ethernet controllers found on the PCI bus,
specifically I am wondering how hard it would be to boot from an Intel e1000
ethernet controller rather than the on-chip ethernet on my Ebony board.
Has anyone had experience with this, or can point me in the right direction
on where to look to write some simple drivers to support transfers from the
e1000 card, that would be great.
Thanks,
Brian
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2003-07-25 12:10 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-25 12:10 Brian Padalino [this message]
2003-07-25 13:14 ` U-Boot, tftp and PCI ethernet Wolfgang Denk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DGEEIPOFGGPOACEFBGGCGEJFCAAA.bpadalino@perigee.com \
--to=bpadalino@perigee.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.