From: "Junhui Liu" <junhui.liu@pigmoral.tech>
To: <sashiko-reviews@lists.linux.dev>,
"Junhui Liu" <junhui.liu@pigmoral.tech>
Cc: <linux-clk@vger.kernel.org>, <robh@kernel.org>,
<conor+dt@kernel.org>, <devicetree@vger.kernel.org>,
<linux-sunxi@lists.linux.dev>
Subject: Re: [PATCH v6 7/8] clk: sunxi-ng: a733: Add bus clock gates
Date: Sun, 11 Oct 2026 01:09:39 +0800 [thread overview]
Message-ID: <DM1BOWOKF9OM.21QWSA1L8WH3U@pigmoral.tech> (raw)
In-Reply-To: <sashiko-outbox-166706@kernel.org>
On Sat Oct 10, 2026 at 11:54 PM CST, sashiko-bot wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [High] clk: sunxi-ng: ahb_store_clk is missing CLK_IS_CRITICAL flag
> --
>
> commit f3ca9c131f39f726826090f6af6752e7b39c004c
> Author: Junhui Liu <junhui.liu@pigmoral.tech>
>
> clk: sunxi-ng: a733: Add bus clock gates
>
> This commit adds bus clock gates that control access to the device register
> interfaces on the Allwinner A733 SoC. It also intends to mark the ahb-store,
> mbus-store, and ahb-cpus clocks as critical to prevent access breakage to
> boot and storage devices.
>
>> diff --git a/drivers/clk/sunxi-ng/ccu-sun60i-a733.c b/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
>> --- a/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
>> +++ b/drivers/clk/sunxi-ng/ccu-sun60i-a733.c
>
> [ ... ]
>
>> +static SUNXI_CCU_GATE_HWS(ahb_msi_lite0_clk, "ahb-msi-lite0", ahb_hws,
>> + 0x5c0, BIT(16), 0);
>> +
>> +/* This gate controls access to the storage controller MMIO registers. */
>> +static SUNXI_CCU_GATE_HWS(ahb_store_clk, "ahb-store", ahb_hws,
>> + 0x5c0, BIT(24), 0);
>
> [Severity: High]
> The commit message notes that the ahb-store clock should be marked as
> critical, but the definition of ahb_store_clk here uses 0 for its flags
> parameter instead of CLK_IS_CRITICAL.
Oops, I forgot to update the commit message accordingly. I will send a
new version to update it.
>
> During late boot, the Common Clock Framework automatically disables any
> clocks that have no active consumers holding a reference to them.
>
> Could this omission allow the framework to inadvertently gate the storage
> controller MMIO registers, leading to a system freeze or storage probe
> failures?
ahb_store_clk has already been set as the parent of the NAND, MMC, SPI,
SPIF and UFS bus gates. Therefore, when any storage-related peripheral is
in use, ahb_store_clk will be enabled through the clock dependency, so it
no longer needs the CLK_IS_CRITICAL flag.
>
>> +static const struct clk_hw *ahb_store_hws[] = { &ahb_store_clk.common.hw };
>> +
>> +/* Keep enabled for access to the CPUS domain registers. */
>> +static SUNXI_CCU_GATE_HWS(ahb_cpus_clk, "ahb-cpus", ahb_hws,
>> + 0x5c0, BIT(28), CLK_IS_CRITICAL);
--
Best regards,
Junhui Liu
next prev parent reply other threads:[~2026-10-10 17:09 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-09 15:52 [PATCH v6 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 1/8] dt-bindings: clk: sun60i-a733-ccu: Add Allwinner A733 support Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 2/8] clk: sunxi-ng: sdm: Add dual patterns support Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 3/8] clk: sunxi-ng: a733: Add PRCM CCU Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 4/8] clk: sunxi-ng: a733: Add PLL clocks support Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 5/8] clk: sunxi-ng: a733: Add bus " Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 6/8] clk: sunxi-ng: a733: Add mod " Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-09 15:52 ` [PATCH v6 7/8] clk: sunxi-ng: a733: Add bus clock gates Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-10 15:54 ` sashiko-bot
2026-10-10 17:09 ` Junhui Liu [this message]
2026-10-09 15:52 ` [PATCH v6 8/8] clk: sunxi-ng: a733: Add reset lines Junhui Liu
2026-10-09 15:52 ` Junhui Liu
2026-10-11 20:01 ` [PATCH v6 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM Vinicius Pedrosa
2026-10-12 15:41 ` Enzo Adriano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DM1BOWOKF9OM.21QWSA1L8WH3U@pigmoral.tech \
--to=junhui.liu@pigmoral.tech \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.