Re: [PATCH v4 4/5] Input: hynitron-cst816x: time out gesture key release

["Oleh Kuzhylnyi" <kuzhylol@gmail.com>]

On Mon Oct 5, 2026 at 11:12 PM CEST, Daniel Golle wrote:
> The controller reports a gesture code once and can then stay quiet
> until the next touch, which leaves the gesture key pressed for as long
> as the panel is left alone. Release the gesture keys 40 ms after the
> last report that carried a gesture code, so that the release comes
> from whichever happens first, the timeout or a report without a
> gesture code. The 40 ms matches TSC200X_PENUP_TIME_MS, chosen there
> for the same want of a lift event from the controller, and has to stay
> above the interval between consecutive reports of a held gesture.
>
> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
> ---
> v4: follow the keycode lookup and the single read of patch 3
> v3: use timer_shutdown_sync() in the devres teardown action
>     (Sashiko AI review)
> v2: skip the release when the interrupt handler re-armed the timer
>     while the timer callback waited for the lock (Sashiko AI review)
>
>  drivers/input/touchscreen/hynitron-cst816x.c | 52 ++++++++++++++++++--
>  1 file changed, 49 insertions(+), 3 deletions(-)
>

Tested on Raspberry Pi 4B with CST816S panel.
Reported coordinates and gestures are valid.

Thank you!

Tested-by: Oleh Kuzhylnyi <kuzhylol@gmail.com>

Best regards,
Oleh Kuzhylnyi