From: "Markus Baertschi" <markus@markus.org>
To: "linux-lvm@sistina.com" <linux-lvm@sistina.com>
Subject: [linux-lvm] Segmentation fault in vgscan
Date: Thu Aug 21 15:09:01 2003 [thread overview]
Message-ID: <E19pvj8-0007t3-1V@server2.hostpoint.ch> (raw)
I've got a strange problem with LVM. My environment is four
IBM x440 servers (2 CPU, 2G memory) interconnected with two
fcs adapters and two switches to a FastT700 SAN storage array.
Due to circumstances we are trying to understand the FCS drivers
did show our disk devices twice (once per adapter). This is a problem
on our part, but vgscan should terminate with an error message
instead of a segfault.
We've started out with 0.98beta2 (what came with out SuSE 7). The
problem is the same with the latest tarball (1.0.7) from sistina.
Markus
Some output from vgscan:
<1> vg_check_exist_all_vg -- before vg_check_exist ( sapqvg)
<22> vg_check_exist -- CALLED with VG: sapqvg
<333> vg_check_name -- CALLED with VG: sapqvg
<4444> lvm_check_chars -- CALLED with name: "sapqvg"
<4444> lvm_check_chars -- LEAVING with ret: 0
<333> vg_check_name -- LEAVING with ret: 0
<22> vg_check_exist -- before pv_read_all_pv_of_vg
<333> pv_read_all_pv_of_vg -- CALLED with vg_name: "sapqvg"
<4444> vg_check_name -- CALLED with VG: sapqvg
<55555> lvm_check_chars -- CALLED with name: "sapqvg"
<55555> lvm_check_chars -- LEAVING with ret: 0
<4444> vg_check_name -- LEAVING with ret: 0
<4444> pv_read_all_pv -- CALLED
<4444> pv_read_all_pv -- avoiding multiple entries in case of MD; np: 0
<4444> pv_read_all_pv -- LEAVING with ret: 0
<4444> pv_check_consistency -- CALLED
<55555> pv_check_name -- CALLED with "/dev/sdb1"
<666666> lvm_check_chars -- CALLED with name: "/dev/sdb1"
<666666> lvm_check_chars -- LEAVING with ret: 0
<666666> lvm_check_dev -- CALLED
<7777777> lvm_check_partitioned_dev -- CALLED
<88888888> lvm_get_device_type called
<88888888> lvm_get_device_type leaving with 1
<7777777> lvm_check_partitioned_dev -- LEAVING with ret: TRUE
<666666> lvm_check_dev -- LEAVING with ret: 1
<55555> pv_check_name -- LEAVING with ret: 0
<55555> vg_check_name -- CALLED with VG: sapqvg
<666666> lvm_check_chars -- CALLED with name: "sapqvg"
<666666> lvm_check_chars -- LEAVING with ret: 0
<55555> vg_check_name -- LEAVING with ret: 0
<55555> lvm_check_dev -- CALLED
<666666> lvm_check_partitioned_dev -- CALLED
<7777777> lvm_get_device_type called
<7777777> lvm_get_device_type leaving with 1
<666666> lvm_check_partitioned_dev -- LEAVING with ret: TRUE
<55555> lvm_check_dev -- LEAVING with ret: 1
<55555> pv_check_new -- CALLED
<55555> pv_check_new -- LEAVING with ret: 0
<4444> pv_check_consistency -- LEAVING with ret: 0
<4444> pv_read_uuidlist -- CALLED with /dev/sdb1
<4444> lvm_check_uuid -- LEAVING with ret: 0
<333> lvm_check_uuid -- LEAVING with ret: 0
<22> lvm_check_uuid -- LEAVING with ret: -1
<1> lvm_check_uuid -- LEAVING with ret: -1
<> lvm_check_uuid -- LEAVING with ret: -1
... (repeats 250 times) ...
<> lvm_check_uuid -- LEAVING with ret: -1
<> pv_read_uuidlist -- LEAVING with ret: 2
Segmentation fault
lblsapq00:~ # gdb ./LVM/1.0.7/tools/vgscan
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-suse-linux"...
(gdb) run
Starting program: /root/./LVM/1.0.7/tools/vgscan
vgscan -- reading all physical volumes (this may take a while...)
Program received signal SIGSEGV, Segmentation fault.
0x400c97a3 in strncmp () from /lib/libc.so.6
(gdb) bt
#0 0x400c97a3 in strncmp () from /lib/libc.so.6
#1 0x400337f0 in pv_read_all_pv_of_vg (vg_name=0x804dc34 "sapqvg", pv=
0xbfffe948, reread=1)
at pv_read_all_pv_of_vg.c:148
#2 0x40038ac1 in vg_check_exist (vg_name=0x804dc34 "sapqvg") at
vg_check_exist.c:59
#3 0x40038da2 in vg_check_exist_all_vg () at vg_check_exist.c:128
#4 0x8049351 in main (argc=1, argv=0xbfffeb64) at vgscan.c:188
#5 0x4006cc5f in __libc_start_main () from /lib/libc.so.6
(gdb) quit
--
Markus Baertschi Phone: ++41 (21) 807 1677
Bas du Rossé 14b Fax : ++41 (21) 807 1678
CH-1163, Etoy Email: markus@markus.org
Switzerland Homepage: www.markus.org
next reply other threads:[~2003-08-21 15:09 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-08-21 15:09 Markus Baertschi [this message]
2003-08-22 5:34 ` [linux-lvm] Segmentation fault in vgscan Heinz J . Mauelshagen
2003-08-22 5:52 ` Markus Baertschi
2003-08-22 6:09 ` Heinz J . Mauelshagen
2003-08-22 6:53 ` Markus Baertschi
2003-08-22 8:01 ` Heinz J . Mauelshagen
2003-09-10 7:11 ` Markus Baertschi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E19pvj8-0007t3-1V@server2.hostpoint.ch \
--to=markus@markus.org \
--cc=linux-lvm@sistina.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.