All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ducrot Bruno <ducrot@arm.linux.org.uk>
To: cpufreq@lists.arm.linux.org.uk
Subject: cpufreq patch,1.56,1.57
Date: Wed, 03 Sep 2003 10:20:02 +0100	[thread overview]
Message-ID: <E19uTo2-0005dc-LD@flint.arm.linux.org.uk> (raw)

Update of /mnt/src/cvsroot/cpufreq
In directory flint:/tmp/cvs-serv21659

Modified Files:
	patch 
Log Message:
* add speedstep-smi driver (Hiroshi Miura)
* clean up speedstep-smi driver (Dominik Brodowski)
        - fixes a couple of warnings
        - to run as a module, we need to export ist_info. Also, only show the
          IST_INFO line in dmesg if speedstep_smi is enabled.
        - Use  a new ->resume callback in the cpufreq core.
        - let's call this driver "speedstep-smi" in cpufreq_driver also
        - if the smi_get_freqs call fails, fall back to the "let's try it out
          and see what frequency we are at" mechanism. Needed on my notebook (at
          least).
* update driver/cpufreq/cpufreq.c


Index: patch
===================================================================
RCS file: /mnt/src/cvsroot/cpufreq/patch,v
retrieving revision 1.56
retrieving revision 1.57
diff -u -r1.56 -r1.57
--- patch	27 Aug 2003 10:42:18 -0000	1.56
+++ patch	3 Sep 2003 09:19:58 -0000	1.57
@@ -9,3 +9,127 @@
  obj-$(CONFIG_BSD_PROCESS_ACCT) += acct.o
  obj-$(CONFIG_COMPAT) += compat.o
  obj-$(CONFIG_IKCONFIG) += configs.o
+
+
+diff -Nru a/arch/i386/boot/setup.S b/arch/i386/boot/setup.S
+--- a/arch/i386/boot/setup.S	Wed Aug 20 09:28:33 2003
++++ b/arch/i386/boot/setup.S	Wed Aug 20 09:28:33 2003
+@@ -506,6 +506,17 @@
+ 	movw	$0xAA, (0x1ff)			# device present
+ no_psmouse:
+ 
++#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
++	movl	$0x0000E980, %eax		# IST Support 
++	movl	$0x47534943, %edx		# Request value
++	int	$0x15
++
++	movl	%eax, (96)
++	movl	%ebx, (100)
++	movl	%ecx, (104)
++	movl	%edx, (108)
++#endif
++
+ #if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+ # Then check for an APM BIOS...
+ 						# %ds points to the bootsector
+
+
+
+diff -Nru a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c
+--- a/arch/i386/kernel/setup.c	Wed Aug 20 09:28:33 2003
++++ b/arch/i386/kernel/setup.c	Wed Aug 20 09:28:33 2003
+@@ -43,7 +43,7 @@
+ #include <asm/setup.h>
+ #include <asm/arch_hooks.h>
+ #include <asm/sections.h>
+-#include <asm/io_apic.h>
++#include <asm/ist.h>
+ #include "setup_arch_pre.h"
+ #include "mach_resources.h"
+ 
+@@ -101,6 +101,7 @@
+ 	unsigned char table[0];
+ };
+ struct edid_info edid_info;
++struct ist_info ist_info;
+ struct e820map e820;
+ 
+ unsigned char aux_device_present;
+@@ -954,6 +955,7 @@
+  	screen_info = SCREEN_INFO;
+ 	edid_info = EDID_INFO;
+ 	apm_info.bios = APM_BIOS_INFO;
++	ist_info = IST_INFO;
+ 	saved_videomode = VIDEO_MODE;
+ 	printk("Video mode to be used for restore is %lx\n", saved_videomode);
+ 	if( SYS_DESC_TABLE.length != 0 ) {
+
+
+
+--- linux-2.6.0-test4/arch/i386/kernel/i386_ksyms.c	2003/09/03 08:18:59	1.1
++++ linux-2.6.0-test4/arch/i386/kernel/i386_ksyms.c	2003/09/03 08:20:27
+@@ -33,6 +33,7 @@
+ #include <asm/tlbflush.h>
+ #include <asm/nmi.h>
+ #include <asm/edd.h>
++#include <asm/ist.h>
+ 
+ extern void dump_thread(struct pt_regs *, struct user *);
+ extern spinlock_t rtc_lock;
+@@ -209,3 +210,7 @@
+ EXPORT_SYMBOL(edd);
+ EXPORT_SYMBOL(eddnr);
+ #endif
++
++#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
++EXPORT_SYMBOL(ist_info);
++#endif
+
+
+diff -Nru a/include/asm-i386/ist.h b/include/asm-i386/ist.h
+--- /dev/null	Wed Dec 31 16:00:00 1969
++++ b/include/asm-i386/ist.h	Wed Aug 20 09:28:34 2003
+@@ -0,0 +1,32 @@
++#ifndef _ASM_IST_H
++#define _ASM_IST_H
++
++/*
++ * Include file for the interface to IST BIOS
++ * Copyright 2002 Andy Grover <andrew.grover@intel.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; either version 2, or (at your option) any
++ * later version.
++ *
++ * This program is distributed in the hope that it will be useful, but
++ * WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
++ * General Public License for more details.
++ */
++
++
++#ifdef __KERNEL__
++
++struct ist_info {
++	unsigned long	signature;
++	unsigned long	command;
++	unsigned long	event;
++	unsigned long	perf_level;
++};
++
++extern struct ist_info ist_info;
++
++#endif	/* __KERNEL__ */
++#endif	/* _ASM_IST_H */
+diff -Nru a/include/asm-i386/setup.h b/include/asm-i386/setup.h
+--- a/include/asm-i386/setup.h	Wed Aug 20 09:28:33 2003
++++ b/include/asm-i386/setup.h	Wed Aug 20 09:28:34 2003
+@@ -26,6 +26,7 @@
+ #define E820_MAP_NR (*(char*) (PARAM+E820NR))
+ #define E820_MAP    ((struct e820entry *) (PARAM+E820MAP))
+ #define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
++#define IST_INFO   (*(struct ist_info *) (PARAM+0x60))
+ #define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
+ #define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
+ #define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))

                 reply	other threads:[~2003-09-03  9:20 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E19uTo2-0005dc-LD@flint.arm.linux.org.uk \
    --to=ducrot@arm.linux.org.uk \
    --cc=cpufreq@lists.arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.