From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles J Gillan Date: Wed, 17 Aug 2005 17:18:44 +0100 Subject: [U-Boot-Users] Script based testing? Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de We are planning to write some Perl scripts to automate our testing and we will use the U-Boot shell via the serial interface. This is appealing because, for example, we can put tests into lengthy repeat loops and run them automatically to stress our board. We will use some of our own custom commands that we added to the build for the FPGAs on our board but it seems to us very likely that this script based testing has probably been done before by many U-Boot users for the "common" commands that are in the build. I am aware of the Kermit scripts in the tools/scripts directory but they perform only a few commands. I checked the mail archive at SourceForge but found nothing relevant, so I am raising this on the list myself. Are there any existing scripts (Perl or any other language) for U-Boot command line testing and that are in the public domain already ? Thanks, Charles. ---------------------------------------------------------------------------- -------- Dr Charles J Gillan The Institute of Electronics, Communications and Information Technology (ECIT), Queen's University Belfast, Titanic Quarter Queen's Road, Queen's Island, Belfast, BT3 9DT Northern Ireland, UK Tel: +44 (0) 2890 971847 Fax: +44 (0) 2890 971702 ---------------------------------------------------------------------------- -------- -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20050817/c6c01256/attachment.htm