All of lore.kernel.org
 help / color / mirror / Atom feed
From: devik@cdi.cz (Martin Devera)
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH 1/1 RESEND 3] i2c: add BroadCom HT-1000 to
Date: Wed, 22 Feb 2006 12:25:35 +0000	[thread overview]
Message-ID: <E1FBt3n-0005KU-00@devix> (raw)

From: Martin Devera <devik at cdi.cz>

Add BroadCom HT-1000 south bridge's PCI ID to i2c-piix driver. Note
that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3
and standard values like 0 or 9 causes hangup.

Signed-off-by: Martin Devera <devik at cdi.cz>
---
Kudos to Rudolf Marek for its helpful comments.
In v3 of the patch I removed comment where I guessed that fix_hstcfg
might be useful on HT-1000 too but it was only speculation based
on SMBHSTCFG value.

diff -upr a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
--- a/Documentation/i2c/busses/i2c-piix4	Thu Feb 16 00:52:01 2006
+++ b/Documentation/i2c/busses/i2c-piix4	Thu Feb 16 00:55:37 2006
@@ -4,7 +4,7 @@ Supported adapters:
   * Intel 82371AB PIIX4 and PIIX4E
   * Intel 82443MX (440MX)
     Datasheet: Publicly available at the Intel website
-  * ServerWorks OSB4, CSB5 and CSB6 southbridges
+  * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
     Datasheet: Only available via NDA from ServerWorks
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff -upr a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
--- a/drivers/i2c/busses/Kconfig	Thu Feb 16 00:56:32 2006
+++ b/drivers/i2c/busses/Kconfig	Thu Feb 16 00:58:24 2006
@@ -167,12 +167,14 @@ config I2C_PIIX4
 	help
 	  If you say yes to this option, support will be included for the Intel
 	  PIIX4 family of mainboard I2C interfaces.  Specifically, the following
-	  versions of the chipset are supported:
+	  versions of the chipset are supported (note that Serverworks is part
+	  of BroadCom):
 	    Intel PIIX4
 	    Intel 440MX
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
+	    Serverworks HT-1000
 	    SMSC Victory66
 
 	  This driver can also be built as a module.  If so, the module
diff -upr a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
--- a/drivers/i2c/busses/i2c-piix4.c	Tue Feb 14 17:03:23 2006
+++ b/drivers/i2c/busses/i2c-piix4.c	Tue Feb 14 16:57:29 2006
@@ -419,6 +419,8 @@ static struct pci_device_id piix4_ids[] 
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
 	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
 	  .driver_data = 3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
diff -upr a/include/linux/pci_ids.h b/include/linux/pci_ids.h
--- a/include/linux/pci_ids.h	Tue Feb 14 17:03:36 2006
+++ b/include/linux/pci_ids.h	Tue Feb 14 16:55:16 2006
@@ -1343,6 +1343,7 @@
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213


                 reply	other threads:[~2006-02-22 12:25 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1FBt3n-0005KU-00@devix \
    --to=devik@cdi.cz \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.