From: Jon Loeliger <jdl@jdl.com>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 6/9 v3] Add mpc8641hpcn PCI/PCI-Express platform files.
Date: Sat, 17 Jun 2006 17:52:48 -0500 [thread overview]
Message-ID: <E1Frjeq-0004P5-Hn@jdl.com> (raw)
Signed-off-by: Xianghua Xiao <x.xiao@freescale.com>
Signed-off-by: Wei Zhang <Wei.Zhang@freescale.com>
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
arch/powerpc/platforms/86xx/mpc86xx_pcie.c | 173 +++++++++++++++
arch/powerpc/platforms/86xx/pci.c | 325 ++++++++++++++++++++++++++++
2 files changed, 498 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c
new file mode 100644
index 0000000..a2f4f73
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c
@@ -0,0 +1,173 @@
+/*
+ * Support for indirect PCI bridges.
+ *
+ * Copyright (C) 1998 Gabriel Paubert.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * "Temporary" MPC8548 Errata file -
+ * The standard indirect_pci code should work with future silicon versions.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+
+#include "mpc86xx.h"
+
+#define PCI_CFG_OUT out_be32
+
+/* ERRATA PCI-Ex 14 PCIE Controller timeout */
+#define PCIE_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff)
+
+
+static int
+indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ volatile void __iomem *cfg_data;
+ u32 temp;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Possible artifact of CDCpp50937 needs further investigation */
+ if (devfn != 0x0 && bus->number == 0xff)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ PCIE_FIX;
+ if (bus->number == 0xff) {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000000 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ } else {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000001 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+ cfg_data = hose->cfg_data;
+ PCIE_FIX;
+ temp = in_le32(cfg_data);
+ switch (len) {
+ case 1:
+ *val = (temp >> (((offset & 3))*8)) & 0xff;
+ break;
+ case 2:
+ *val = (temp >> (((offset & 3))*8)) & 0xffff;
+ break;
+ default:
+ *val = temp;
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int
+indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ volatile void __iomem *cfg_data;
+ u32 temp;
+
+ if (ppc_md.pci_exclude_device)
+ if (ppc_md.pci_exclude_device(bus->number, devfn))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* Possible artifact of CDCpp50937 needs further investigation */
+ if (devfn != 0x0 && bus->number == 0xff)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ PCIE_FIX;
+ if (bus->number == 0xff) {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000000 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ } else {
+ PCI_CFG_OUT(hose->cfg_addr,
+ (0x80000001 | ((offset & 0xf00) << 16) |
+ ((bus->number - hose->bus_offset) << 16)
+ | (devfn << 8) | ((offset & 0xfc) )));
+ }
+
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
+ cfg_data = hose->cfg_data;
+ switch (len) {
+ case 1:
+ PCIE_FIX;
+ temp = in_le32(cfg_data);
+ temp = (temp & ~(0xff << ((offset & 3) * 8))) |
+ (val << ((offset & 3) * 8));
+ PCIE_FIX;
+ out_le32(cfg_data, temp);
+ break;
+ case 2:
+ PCIE_FIX;
+ temp = in_le32(cfg_data);
+ temp = (temp & ~(0xffff << ((offset & 3) * 8)));
+ temp |= (val << ((offset & 3) * 8)) ;
+ PCIE_FIX;
+ out_le32(cfg_data, temp);
+ break;
+ default:
+ PCIE_FIX;
+ out_le32(cfg_data, val);
+ break;
+ }
+ PCIE_FIX;
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops indirect_pcie_ops = {
+ indirect_read_config_pcie,
+ indirect_write_config_pcie
+};
+
+void __init
+setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
+ void __iomem * cfg_data)
+{
+ hose->cfg_addr = cfg_addr;
+ hose->cfg_data = cfg_data;
+ hose->ops = &indirect_pcie_ops;
+}
+
+void __init
+setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
+{
+ unsigned long base = cfg_addr & PAGE_MASK;
+ void __iomem *mbase, *addr, *data;
+
+ mbase = ioremap(base, PAGE_SIZE);
+ addr = mbase + (cfg_addr & ~PAGE_MASK);
+ if ((cfg_data & PAGE_MASK) != base)
+ mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
+ data = mbase + (cfg_data & ~PAGE_MASK);
+ setup_indirect_pcie_nomap(hose, addr, data);
+}
diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c
new file mode 100644
index 0000000..5180df7
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pci.c
@@ -0,0 +1,325 @@
+/*
+ * MPC86XX pci setup code
+ *
+ * Recode: ZHANG WEI <wei.zhang@freescale.com>
+ * Initial author: Xianghua Xiao <x.xiao@freescale.com>
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/serial.h>
+
+#include <asm/system.h>
+#include <asm/atomic.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/immap_86xx.h>
+#include <asm/pci-bridge.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DBG(fmt, args...)
+#endif
+
+struct pcie_outbound_window_regs {
+ uint pexotar; /* 0x.0 - PCI Express outbound translation address register */
+ uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */
+ uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */
+ char res1[4];
+ uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */
+ char res2[12];
+};
+
+struct pcie_inbound_window_regs {
+ uint pexitar; /* 0x.0 - PCI Express inbound translation address register */
+ char res1[4];
+ uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */
+ uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */
+ uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */
+ char res2[12];
+};
+
+static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc)
+{
+ volatile struct ccsr_pex *pcie;
+ volatile struct pcie_outbound_window_regs *pcieow;
+ volatile struct pcie_inbound_window_regs *pcieiw;
+ int i = 0;
+
+ DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start,
+ rsrc->end - rsrc->start + 1);
+ pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1);
+
+ /* Disable all windows (except pexowar0 since its ignored) */
+ pcie->pexowar1 = 0;
+ pcie->pexowar2 = 0;
+ pcie->pexowar3 = 0;
+ pcie->pexowar4 = 0;
+ pcie->pexiwar1 = 0;
+ pcie->pexiwar2 = 0;
+ pcie->pexiwar3 = 0;
+
+ pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1;
+ pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1;
+
+ /* Setup outbound MEM window */
+ for(i = 0; i < 3; i++)
+ if (hose->mem_resources[i].flags & IORESOURCE_MEM){
+ DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n",
+ hose->mem_resources[i].start,
+ hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1);
+ pcieow->pexotar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->mem_resources[i].start) >> 12
+ & 0x000fffff;
+ /* Enable, Mem R/W */
+ pcieow->pexowar = 0x80044000 |
+ (__ilog2(hose->mem_resources[i].end
+ - hose->mem_resources[i].start + 1)
+ - 1);
+ pcieow++;
+ }
+
+ /* Setup outbound IO window */
+ if (hose->io_resource.flags & IORESOURCE_IO){
+ DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n",
+ hose->io_resource.start,
+ hose->io_resource.end - hose->io_resource.start + 1,
+ hose->io_base_phys);
+ pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff;
+ pcieow->pexotear = 0;
+ pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff;
+ /* Enable, IO R/W */
+ pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end
+ - hose->io_resource.start + 1) - 1);
+ }
+
+ /* Setup 2G inbound Memory Window @ 0 */
+ pcieiw->pexitar = 0x00000000;
+ pcieiw->pexiwbar = 0x00000000;
+ /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */
+ pcieiw->pexiwar = 0xa0f5501e;
+}
+
+static void __init
+mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size)
+{
+ volatile struct ccsr_pex *pcie;
+ u16 cmd;
+ unsigned int temps;
+
+ DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n",
+ pcie_offset, pcie_size);
+
+ pcie = ioremap(pcie_offset, pcie_size);
+
+ early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+ | PCI_COMMAND_IO;
+ early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd);
+
+ early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80);
+
+ /* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */
+ early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps);
+ temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
+ early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps);
+}
+
+int __init add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct resource rsrc;
+ int *bus_range;
+ int has_address = 0;
+ int primary = 0;
+
+ DBG("Adding PCIE host bridge %s\n", dev->full_name);
+
+ /* Fetch host bridge registers address */
+ has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+ /* Get bus range if any */
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int))
+ printk(KERN_WARNING "Can't get bus-range for %s, assume"
+ " bus 0\n", dev->full_name);
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+ hose->arch_data = dev;
+ hose->set_cfg_type = 1;
+
+ /* last_busno = 0xfe cause by MPC8641 PCIE bug */
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xfe;
+
+ setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4);
+
+ /* Setup the PCIE host controller. */
+ mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1);
+
+ if ((rsrc.start & 0xfffff) == 0x8000)
+ primary = 1;
+
+ printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. "
+ "Firmware bus number: %d->%d\n",
+ rsrc.start, hose->first_busno, hose->last_busno);
+
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Setup PEX window registers */
+ setup_pcie_atmu(hose, &rsrc);
+
+ return 0;
+}
+
+static void __devinit quirk_ali1575(struct pci_dev *dev)
+{
+ unsigned short temp;
+
+ /*
+ * ALI1575 interrupts route table setup:
+ *
+ * IRQ pin IRQ#
+ * PIRQA ---- 3
+ * PIRQB ---- 4
+ * PIRQC ---- 5
+ * PIRQD ---- 6
+ * PIRQE ---- 9
+ * PIRQF ---- 10
+ * PIRQG ---- 11
+ * PIRQH ---- 12
+ *
+ * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
+ * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
+ */
+ pci_write_config_dword(dev, 0x48, 0xb9317542);
+
+ /* USB 1.1 OHCI controller 1, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x86, 0x0c);
+
+ /* USB 1.1 OHCI controller 2, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x87, 0x0d);
+
+ /* USB 1.1 OHCI controller 3, interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x88, 0x0f);
+
+ /* USB 2.0 controller, interrupt: PIRQ7 */
+ pci_write_config_byte(dev, 0x74, 0x06);
+
+ /* Audio controller, interrupt: PIRQE */
+ pci_write_config_byte(dev, 0x8a, 0x0c);
+
+ /* Modem controller, interrupt: PIRQF */
+ pci_write_config_byte(dev, 0x8b, 0x0d);
+
+ /* HD audio controller, interrupt: PIRQG */
+ pci_write_config_byte(dev, 0x8c, 0x0e);
+
+ /* Serial ATA interrupt: PIRQD */
+ pci_write_config_byte(dev, 0x8d, 0x0b);
+
+ /* SMB interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8e, 0x0f);
+
+ /* PMU ACPI SCI interrupt: PIRQH */
+ pci_write_config_byte(dev, 0x8f, 0x0f);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x3d);
+ pci_write_config_byte(dev, 0x75, 0x0f);
+
+ /* Set IRQ14 and IRQ15 to legacy IRQs */
+ pci_read_config_word(dev, 0x46, &temp);
+ temp |= 0xc000;
+ pci_write_config_word(dev, 0x46, temp);
+
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+}
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ pci_read_config_byte(dev,0x83,&c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x0a, 0x06);
+
+ pci_read_config_byte(dev,0x83,&c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_read_config_byte(dev,0x84,&c);
+ c |= 0x01;
+ pci_write_config_byte(dev, 0x84, c);
+}
+
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+ pci_write_config_word(dev, 0x04, 0x0405);
+ pci_read_config_word(dev, 0x4a, &temp);
+ temp |= 0x1000;
+ pci_write_config_word(dev, 0x4a, temp);
+}
+
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+ pci_write_config_word(dev, 0x04, 0x0007);
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80);
+ pci_write_config_byte(dev, 0x09, 0x01);
+ pci_write_config_byte(dev, 0x7c, temp);
+ dev->class |= 0x1;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
reply other threads:[~2006-06-17 22:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1Frjeq-0004P5-Hn@jdl.com \
--to=jdl@jdl.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.