From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from jdl.com (www.jdl.com [66.118.10.122]) (using TLSv1 with cipher AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTP id 851B067BB5 for ; Sun, 18 Jun 2006 08:53:01 +1000 (EST) To: linuxppc-dev@ozlabs.org, khali@linux-fr.org Subject: [PATCH 8/9 v3] Document I2C_MPC option for 86xx too. Date: Sat, 17 Jun 2006 17:52:54 -0500 From: Jon Loeliger Message-Id: List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , The same I2C driver found on 85xx, etc., can be used for 86xx too. Signed-off-by: Jon Loeliger --- drivers/i2c/busses/Kconfig | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index d6d4494..fbeae82 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -252,12 +252,12 @@ config I2C_POWERMAC will be called i2c-powermac. config I2C_MPC - tristate "MPC107/824x/85xx/52xx" + tristate "MPC107/824x/85xx/52xx/86xx" depends on I2C && PPC32 help If you say yes to this option, support will be included for the built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and - MPC85xx family processors. The driver may also work on 52xx + MPC85xx/MPC8641 family processors. The driver may also work on 52xx family processors, though interrupts are known not to work. This driver can also be built as a module. If so, the module