[U-Boot-Users] uboot for TI DSP c6000

[paul burrell <paul@burrellhome.com>]

Frank,
What am I missing here?   Sounds like you have some experience, so could you
answer a couple of questions.

First I should clarify a couple of things just in case I did not communicate
them correctly.

The target is a TI TMS320C6204.  It is a DSP from TI using a C64 core.   It
is not one of the OMAPs with an embedded ARM.   The normal GCC compiler set
does not appear to support the C6000 process, but I just found some
documentation indicating that might not be true.

1.  So I went to the ELDK page (DENX).   According to the page, it only
supports PowerPC.  I am going to download it and check, but that is all I
see.  I did see that they have ARM, PPC, and MIPS directories, so it might
be more than PPC.
2.  So lets say it does support it, what toolchain should I be looking at?
Version numbers would be nice.

In the end, embedded linix is going to be more than what I need.   I am just
trying to have a simple bootloader with the ability to edit memory, test
functions, program flash, and load over a serial port.  I don't even need
networking capability.

Any advice would be great.

Thanks,
Paul


-----Original Message-----
From: Frank [mailto:frannk_m1 at yahoo.com] 
Sent: Thursday, September 07, 2006 6:00 PM
To: paul at burrellhome.com; u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] uboot for TI DSP c6000



--- Paul Burrell <paul@burrellhome.com> wrote:

> Has anyone seen (or done) a port for the c6000 dsp family for
> Code Composer
> (TI compiler)?
Why would you want to do that under Windoze?
it's easy enough to do with the ELDK (I'm doing it) and writing
it to flash with flashwriter_nor.out...

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com