From: Jon Loeliger <jdl@jdl.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 05/30] include/: Remove obsolete references to CONFIG_COMMANDS
Date: Mon, 09 Jul 2007 22:45:45 -0500 [thread overview]
Message-ID: <E1I86fZ-0004Jn-LD@jdl.com> (raw)
Mostly removed from comments here.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
include/_exports.h | 2 +-
include/configs/CPU86.h | 4 +---
include/configs/CPU87.h | 4 +---
include/configs/IDS8247.h | 4 +---
include/configs/IPHASE4539.h | 3 +--
include/configs/ISPAN.h | 3 +--
include/configs/MPC8260ADS.h | 3 +--
include/configs/MPC8266ADS.h | 3 +--
include/configs/PM826.h | 3 +--
include/configs/PM828.h | 3 +--
include/configs/RPXsuper.h | 3 +--
include/configs/Rattler.h | 4 ++--
include/configs/SCM.h | 3 +--
include/configs/TQM8260.h | 3 +--
include/configs/TQM8272.h | 3 +--
include/configs/VoVPN-GW.h | 3 +--
include/configs/ZPC1900.h | 4 ++--
include/configs/atc.h | 4 +---
include/configs/cogent_mpc8260.h | 3 +--
include/configs/ep8248.h | 4 ++--
include/configs/ep8260.h | 3 +--
include/configs/ep82xxm.h | 4 ++--
include/configs/gw8260.h | 3 +--
include/configs/hymod.h | 3 +--
include/configs/ppmc8260.h | 3 +--
include/configs/rsdproto.h | 3 +--
include/configs/sacsng.h | 3 +--
include/configs/sbc8260.h | 3 +--
include/configs/sc3.h | 3 +--
include/exports.h | 2 +-
include/lcd.h | 4 ++--
include/mk48t59.h | 2 +-
include/net.h | 6 +++---
include/pcmcia.h | 6 +++---
34 files changed, 43 insertions(+), 71 deletions(-)
diff --git a/include/_exports.h b/include/_exports.h
index a579983..eeb65f4 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -15,7 +15,7 @@ EXPORT_FUNC(do_reset)
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
EXPORT_FUNC(simple_strtoul)
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
EXPORT_FUNC(i2c_write)
EXPORT_FUNC(i2c_read)
#endif /* CFG_CMD_I2C */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index 631c78e..202914b 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -68,9 +68,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/CPU87.h b/include/configs/CPU87.h
index 666cb13..ce25aa5 100644
--- a/include/configs/CPU87.h
+++ b/include/configs/CPU87.h
@@ -69,9 +69,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h
index 45a96ae..e26dc56 100644
--- a/include/configs/IDS8247.h
+++ b/include/configs/IDS8247.h
@@ -128,9 +128,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/IPHASE4539.h b/include/configs/IPHASE4539.h
index 383ffe2..1cb2d6b 100644
--- a/include/configs/IPHASE4539.h
+++ b/include/configs/IPHASE4539.h
@@ -67,8 +67,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/ISPAN.h b/include/configs/ISPAN.h
index 75dea18..e6ef765 100644
--- a/include/configs/ISPAN.h
+++ b/include/configs/ISPAN.h
@@ -58,8 +58,7 @@
* for FCC).
*
* If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
- * be defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index b41866f..a36b69d 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -101,8 +101,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 306ee49..a8c40cf 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -83,8 +83,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index a93400d..57d46ac 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -103,8 +103,7 @@
* - CONFIG_NET_MULTI must be defined
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#define CONFIG_NET_MULTI
#undef CONFIG_ETHER_NONE /* define if ether on something else */
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 5095a05..3f1bb8e 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -103,8 +103,7 @@
* - CONFIG_NET_MULTI must be defined
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#define CONFIG_NET_MULTI
#undef CONFIG_ETHER_NONE /* define if ether on something else */
diff --git a/include/configs/RPXsuper.h b/include/configs/RPXsuper.h
index c39aff1..1401da3 100644
--- a/include/configs/RPXsuper.h
+++ b/include/configs/RPXsuper.h
@@ -91,8 +91,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
diff --git a/include/configs/Rattler.h b/include/configs/Rattler.h
index 5c64314..5bdf571 100644
--- a/include/configs/Rattler.h
+++ b/include/configs/Rattler.h
@@ -62,8 +62,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
index 67dbc55..46861f8 100644
--- a/include/configs/SCM.h
+++ b/include/configs/SCM.h
@@ -133,8 +133,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h
index 3089fef..ee5e6f7 100644
--- a/include/configs/TQM8260.h
+++ b/include/configs/TQM8260.h
@@ -167,8 +167,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h
index b7a1bae..a55aec2 100644
--- a/include/configs/TQM8272.h
+++ b/include/configs/TQM8272.h
@@ -177,8 +177,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*
* (On TQM8272 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
* X.29 connector, and FCC2 is hardwired to the X.1 connector)
diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h
index 8806244..ebe634f 100644
--- a/include/configs/VoVPN-GW.h
+++ b/include/configs/VoVPN-GW.h
@@ -95,8 +95,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
#define CONFIG_ETHER_ON_FCC
diff --git a/include/configs/ZPC1900.h b/include/configs/ZPC1900.h
index 30c7790..fb5bc0f 100644
--- a/include/configs/ZPC1900.h
+++ b/include/configs/ZPC1900.h
@@ -55,8 +55,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
diff --git a/include/configs/atc.h b/include/configs/atc.h
index cb4e747..4f527fa 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -64,9 +64,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
- *
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#undef CONFIG_ETHER_NONE /* define if ether on something else */
diff --git a/include/configs/cogent_mpc8260.h b/include/configs/cogent_mpc8260.h
index ac1baf3..6315090 100644
--- a/include/configs/cogent_mpc8260.h
+++ b/include/configs/cogent_mpc8260.h
@@ -71,8 +71,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#undef CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 44c4388..8653b55 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -60,8 +60,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 065f967..25f9bd6 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -183,8 +183,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index 5fa7016..430ff4b 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -60,8 +60,8 @@
* SCC, 1-3 for FCC)
*
* If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* Ethernet is not on SCC */
#define CONFIG_ETHER_ON_FCC /* Ethernet is on FCC */
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index cf3eb3f..a8bc928 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -194,8 +194,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 0fdfb15..8a3ad68 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -69,8 +69,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
diff --git a/include/configs/ppmc8260.h b/include/configs/ppmc8260.h
index d99da2f..610fcfd 100644
--- a/include/configs/ppmc8260.h
+++ b/include/configs/ppmc8260.h
@@ -169,8 +169,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
diff --git a/include/configs/rsdproto.h b/include/configs/rsdproto.h
index 5ea76fe..93f5c6b 100644
--- a/include/configs/rsdproto.h
+++ b/include/configs/rsdproto.h
@@ -64,8 +64,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC /* define if ethernet on SCC */
#define CONFIG_ETHER_ON_FCC /* define if ethernet on FCC */
diff --git a/include/configs/sacsng.h b/include/configs/sacsng.h
index dc25831..41f1f25 100644
--- a/include/configs/sacsng.h
+++ b/include/configs/sacsng.h
@@ -159,8 +159,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
diff --git a/include/configs/sbc8260.h b/include/configs/sbc8260.h
index 2a209d3..bf6dab2 100644
--- a/include/configs/sbc8260.h
+++ b/include/configs/sbc8260.h
@@ -182,8 +182,7 @@
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 578ef80..9709fe2 100644
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -68,8 +68,7 @@
* Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
* If undefined, IDE access uses a seperat emulation with higher access speed.
* Consider to inform your Linux IDE driver about the different addresses!
- * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes
- * the CFG_CMD_IDE macro!
+ * IDE_USES_ISA_EMULATION is only used if you define CONFIG_CMD_IDE!
*/
#define IDE_USES_ISA_EMULATION
diff --git a/include/exports.h b/include/exports.h
index 8a9b314..ad20502 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -23,7 +23,7 @@ void do_reset (void);
unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
char *getenv (char *name);
void setenv (char *varname, char *varvalue);
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
#endif /* CFG_CMD_I2C */
diff --git a/include/lcd.h b/include/lcd.h
index f0ec76a..8a4273c 100644
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -173,10 +173,10 @@ void lcd_printf (const char *fmt, ...);
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */
/************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
# include <bmp_layout.h>
# include <asm/byteorder.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
/*
* Information about displays we are using. This is for configuring
diff --git a/include/mk48t59.h b/include/mk48t59.h
index fbdb9f9..a4459c0 100644
--- a/include/mk48t59.h
+++ b/include/mk48t59.h
@@ -26,7 +26,7 @@
*/
-#if defined(CONFIG_RTC_MK48T59) && ((CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE))
+#if defined(CONFIG_RTC_MK48T59) && defined(CONFIG_CMD_DATE)
#define RTC_PORT_ADDR0 CFG_ISA_IO + 0x70
#define RTC_PORT_ADDR1 RTC_PORT_ADDR0 + 0x1
diff --git a/include/net.h b/include/net.h
index 853f55a..f6f33ff 100644
--- a/include/net.h
+++ b/include/net.h
@@ -341,17 +341,17 @@ typedef enum { BOOTP, RARP, ARP, TFTP, DHCP, PING, DNS, NFS, CDP, NETCONS, SNTP
/* from net/net.c */
extern char BootFile[128]; /* Boot File name */
-#if (CONFIG_COMMANDS & CFG_CMD_PING) || defined(CONFIG_CMD_PING)
+#if defined(CONFIG_CMD_PING)
extern IPaddr_t NetPingIP; /* the ip address to ping */
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_CDP) || defined(CONFIG_CMD_CDP)
+#if defined(CONFIG_CMD_CDP)
/* when CDP completes these hold the return values */
extern ushort CDPNativeVLAN;
extern ushort CDPApplianceVLAN;
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SNTP) || defined(CONFIG_CMD_SNTP)
+#if defined(CONFIG_CMD_SNTP)
extern IPaddr_t NetNtpServerIP; /* the ip address to NTP */
extern int NetTimeOffset; /* offset time from UTC */
#endif
diff --git a/include/pcmcia.h b/include/pcmcia.h
index 60794f9..c028ab7 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -31,8 +31,8 @@
* Allow configuration to select PCMCIA slot,
* or try to generate a useful default
*/
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA) || \
- (((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && \
+#if defined(CONFIG_CMD_PCMCIA) || \
+ (defined(CONFIG_CMD_IDE) && \
(defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) ) )
#if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B)
@@ -313,7 +313,7 @@ extern u_int *pcmcia_pgcrx[];
#define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot])
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD) \
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) \
|| defined(CONFIG_PXA_PCMCIA)
extern int check_ide_device(int slot);
#endif
--
1.5.2.2.249.g45fd
reply other threads:[~2007-07-10 3:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1I86fZ-0004Jn-LD@jdl.com \
--to=jdl@jdl.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.