From: Jon Loeliger <jdl@jdl.com>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH 12/30] lib_{m68k, microblaze, mips, ppc}/: Remove obsolete references to CONFIG_COMMANDS
Date: Mon, 09 Jul 2007 22:49:12 -0500 [thread overview]
Message-ID: <E1I86iu-0004LU-JX@jdl.com> (raw)
Signed-off-by: Jon Loeliger <jdl@freescale.com>
---
lib_m68k/board.c | 20 ++++++++++----------
lib_microblaze/board.c | 8 ++++----
lib_mips/board.c | 4 ++--
lib_ppc/board.c | 34 +++++++++++++++++-----------------
lib_ppc/kgdb.c | 2 +-
5 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index 03ae18d..b7e76b8 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -34,20 +34,20 @@
#include <asm/immap_5272.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
#include <ide.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI) || defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
#include <scsi.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#endif
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
#include <net.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) || defined(CONFIG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
#include <cmd_bedbug.h>
#endif
#ifdef CFG_ALLOC_DPRAM
@@ -584,7 +584,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
misc_init_r ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET ();
puts ("KGDB: ");
kgdb_init ();
@@ -620,7 +620,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
@@ -628,19 +628,19 @@ void board_init_r (gd_t *id, ulong dest_addr)
WATCHDOG_RESET ();
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");
doc_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
WATCHDOG_RESET ();
puts ("NAND: ");
nand_init(); /* go init the NAND */
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) && defined(FEC_ENET)
+#if defined(CONFIG_CMD_NET) && defined(FEC_ENET)
WATCHDOG_RESET();
eth_init(bd);
#endif
@@ -659,7 +659,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
last_stage_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) || defined(CONFIG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
WATCHDOG_RESET ();
bedbug_init ();
#endif
diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c
index 07fb0fa..09d4d94 100644
--- a/lib_microblaze/board.c
+++ b/lib_microblaze/board.c
@@ -40,7 +40,7 @@ extern int gpio_init (void);
#ifdef CFG_INTC_0
extern int interrupts_init (void);
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
extern int eth_init (bd_t * bis);
extern int getenv_IPaddr (char *);
#endif
@@ -108,7 +108,7 @@ void board_init (void)
bd_t *bd;
init_fnc_t **init_fnc_ptr;
gd = (gd_t *) CFG_GBL_DATA_OFFSET;
-#if (CONFIG_COMMANDS & CFG_CMD_FLASH) || defined(CONFIG_CMD_FLASH)
+#if defined(CONFIG_CMD_FLASH)
ulong flash_size = 0;
#endif
asm ("nop"); /* FIXME gd is not initialize - wait */
@@ -130,7 +130,7 @@ void board_init (void)
}
}
-#if (CONFIG_COMMANDS & CFG_CMD_FLASH) || defined(CONFIG_CMD_FLASH)
+#if defined(CONFIG_CMD_FLASH)
bd->bi_flashstart = CFG_FLASH_BASE;
if (0 < (flash_size = flash_init ())) {
bd->bi_flashsize = flash_size;
@@ -143,7 +143,7 @@ void board_init (void)
}
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
char *s, *e;
int i;
/* board MAC address */
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 654c5af..dd3d167 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -399,7 +399,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
@@ -410,7 +410,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
misc_init_r ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
puts ("Net: ");
#endif
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index 8bb885d..12ea473 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -35,13 +35,13 @@
#ifdef CONFIG_MPC5xxx
#include <mpc5xxx.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
#include <ide.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI) || defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
#include <scsi.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#endif
#ifdef CONFIG_STATUS_LED
@@ -80,14 +80,14 @@ extern int update_flash_size (int flash_size);
extern void sc3_read_eeprom(void);
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
void doc_init (void);
#endif
#if defined(CONFIG_HARD_I2C) || \
defined(CONFIG_SOFT_I2C)
#include <i2c.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
void nand_init (void);
#endif
@@ -118,7 +118,7 @@ extern ulong __init_end;
extern ulong _end;
ulong monitor_flash_len;
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) || defined(CONFIG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
#include <bedbug/type.h>
#endif
@@ -784,7 +784,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
spi_init_r ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
WATCHDOG_RESET ();
puts ("NAND: ");
nand_init(); /* go init the NAND */
@@ -946,7 +946,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
hermes_start_lxt980 ((int) bd->bi_ethspeed);
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
WATCHDOG_RESET ();
puts ("KGDB: ");
kgdb_init ();
@@ -978,7 +978,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
if ((s = getenv ("loadaddr")) != NULL) {
load_addr = simple_strtoul (s, NULL, 16);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
if ((s = getenv ("bootfile")) != NULL) {
copy_filename (BootFile, s, sizeof (BootFile));
}
@@ -986,19 +986,19 @@ void board_init_r (gd_t *id, ulong dest_addr)
WATCHDOG_RESET ();
-#if (CONFIG_COMMANDS & CFG_CMD_SCSI) || defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_CMD_SCSI)
WATCHDOG_RESET ();
puts ("SCSI: ");
scsi_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
WATCHDOG_RESET ();
puts ("DOC: ");
doc_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
WATCHDOG_RESET ();
puts ("Net: ");
@@ -1006,7 +1006,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
eth_initialize (bd);
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) && ( \
+#if defined(CONFIG_CMD_NET) && ( \
defined(CONFIG_CCM) || \
defined(CONFIG_ELPT860) || \
defined(CONFIG_EP8260) || \
@@ -1031,14 +1031,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
post_run (NULL, POST_RAM | post_bootmode_get(0));
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)) \
- && !((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE))
+#if defined(CONFIG_CMD_PCMCIA) \
+ && !defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
puts ("PCMCIA:");
pcmcia_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
WATCHDOG_RESET ();
# ifdef CONFIG_IDE_8xx_PCCARD
puts ("PCMCIA:");
@@ -1063,7 +1063,7 @@ void board_init_r (gd_t *id, ulong dest_addr)
last_stage_init ();
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) || defined(CONFIG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
WATCHDOG_RESET ();
bedbug_init ();
#endif
diff --git a/lib_ppc/kgdb.c b/lib_ppc/kgdb.c
index 243d311..d272d3a 100644
--- a/lib_ppc/kgdb.c
+++ b/lib_ppc/kgdb.c
@@ -1,7 +1,7 @@
#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#include <kgdb.h>
#include <asm/signal.h>
--
1.5.2.2.249.g45fd
reply other threads:[~2007-07-10 3:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1I86iu-0004LU-JX@jdl.com \
--to=jdl@jdl.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.