From: Filip Navara <filip.navara@gmail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 14/14] HD44780 LCD Controller
Date: Wed, 15 Jul 09 16:52:36 Central Europe Standard Time [thread overview]
Message-ID: <E1MR5qa-0006te-9N@lists.gnu.org> (raw)
Only very simple emulation of the LCD controller is included.
The controller features the standard HD44780 interface and supports character
output on four lines using a static 5x7 font and optional backlight controlled
by signal on a separate pin.
Capabilities such as custom characters, cursor and 5x10 fonts are not
implemented. Saving/loading of device state is not implemented either.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
---
Makefile.target | 2 +-
hw/at91pes.c | 10 ++
hw/hd44780.c | 418 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 429 insertions(+), 1 deletions(-)
create mode 100644 hw/hd44780.c
diff --git a/Makefile.target b/Makefile.target
index dca5340..74d7d5e 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -668,7 +668,7 @@ obj-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
obj-y += syborg_virtio.o
obj-y += at91_aic.o at91_dbgu.o at91_pio.o at91_pit.o at91_pmc.o at91_rtt.o
obj-y += at91_rstc.o at91_intor.o at91_tc.o at91_emac.o at91pes.o
-obj-y += gpio_rotary.o gpio_keypad.o
+obj-y += gpio_rotary.o gpio_keypad.o hd44780.o
CPPFLAGS += -DHAS_AUDIO
endif
ifeq ($(TARGET_BASE_ARCH), sh4)
diff --git a/hw/at91pes.c b/hw/at91pes.c
index 544eaaf..b58cc25 100644
--- a/hw/at91pes.c
+++ b/hw/at91pes.c
@@ -95,6 +95,16 @@ static void at91pes_init(ram_addr_t ram_size,
sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xFFFDC000);
sysbus_connect_irq(sysbus_from_qdev(dev), 0, pic[16]);
+ dev = qdev_create(NULL, "gpio,hd44780");
+ qdev_init(dev);
+ for (i = 0; i < 3; i++)
+ qdev_connect_gpio_out(pioa, 15 - i, qdev_get_gpio_in(dev, 8 + i));
+ qdev_connect_gpio_out(piob, 28, qdev_get_gpio_in(dev, 11));
+ for (i = 0; i < 4; i++) {
+ qdev_connect_gpio_out(pioa, 5 + i, qdev_get_gpio_in(dev, 4 + i));
+ qdev_connect_gpio_out(dev, 4 + i, qdev_get_gpio_in(pioa, 5 + i));
+ }
+
dev = qdev_create(NULL, "gpio,keypad");
qdev_set_prop_ptr(dev, "keys", keys);
qdev_init(dev);
diff --git a/hw/hd44780.c b/hw/hd44780.c
new file mode 100644
index 0000000..fc84f9d
--- /dev/null
+++ b/hw/hd44780.c
@@ -0,0 +1,418 @@
+/*
+ * HD44780 LCD Controller
+ *
+ * Copyright (c) 2009 Filip Navara
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "sysbus.h"
+#include "console.h"
+#include "pixel_ops.h"
+
+/* pin mapping:
+ 8 Data
+ Register Select (input only)
+ Read/Write (input only)
+ Enable (input only)
+ Backlight (input only) */
+
+#define D(x) x
+
+#define PIN_RS 8
+#define PIN_RW 9
+#define PIN_E 10
+#define PIN_BL 11
+
+#define LCD_CLR 1 /* DB0: clear display */
+#define LCD_HOME 2 /* DB1: return to home position */
+#define LCD_ENTRY_MODE 4 /* DB2: set entry mode */
+#define LCD_ENTRY_INC 2 /* DB1: increment */
+#define LCD_ENTRY_SHIFT 1 /* DB2: shift */
+#define LCD_ON_CTRL 8 /* DB3: turn lcd/cursor on */
+#define LCD_ON_DISPLAY 4 /* DB2: turn display on */
+#define LCD_ON_CURSOR 2 /* DB1: turn cursor on */
+#define LCD_ON_BLINK 1 /* DB0: blinking cursor */
+#define LCD_MOVE 16 /* DB4: move cursor/display */
+#define LCD_MOVE_DISP 8 /* DB3: move display (0-> move cursor) */
+#define LCD_MOVE_RIGHT 4 /* DB2: move right (0-> left) */
+#define LCD_FUNCTION 32 /* DB5: function set */
+#define LCD_FUNCTION_8BIT 16 /* DB4: set 8BIT mode (0->4BIT mode) */
+#define LCD_FUNCTION_2LINES 8 /* DB3: two lines (0->one line) */
+#define LCD_FUNCTION_10DOTS 4 /* DB2: 5x10 font (0->5x7 font) */
+#define LCD_CGRAM 64 /* DB6: set CG RAM address */
+#define LCD_DDRAM 128 /* DB7: set DD RAM address */
+#define LCD_BUSY 64 /* DB7: LCD is busy */
+
+#define WIDTH 20
+#define HEIGHT 4
+#define CZOOM 3
+
+uint8_t font5x7[][7]={
+/* */ {0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+/* ! */ {0x04,0x04,0x04,0x04,0x00,0x00,0x04},
+/* " */ {0x0A,0x0A,0x0A,0x00,0x00,0x00,0x00},
+/* # */ {0x0A,0x0A,0x1F,0x0A,0x1F,0x0A,0x0A},
+/* $ */ {0x04,0x0F,0x14,0x0E,0x05,0x1E,0x04},
+/* % */ {0x18,0x19,0x02,0x04,0x08,0x13,0x03},
+/* & */ {0x00,0x00,0x00,0x00,0x00,0x00,0x00},
+/* ' */ {0x0C,0x04,0x08,0x00,0x00,0x00,0x00},
+/* ( */ {0x02,0x04,0x08,0x08,0x08,0x04,0x02},
+/* ) */ {0x08,0x04,0x02,0x02,0x02,0x04,0x08},
+/* * */ {0x00,0x04,0x15,0x0E,0x15,0x04,0x00},
+/* + */ {0x00,0x04,0x04,0x1F,0x04,0x04,0x00},
+/* , */ {0x00,0x00,0x00,0x00,0x0C,0x04,0x08},
+/* - */ {0x00,0x00,0x00,0x1F,0x00,0x00,0x00},
+/* . */ {0x00,0x00,0x00,0x00,0x00,0x0C,0x0C},
+/* / */ {0x00,0x01,0x02,0x04,0x08,0x10,0x00},
+/* 0 */ {0x0E,0x11,0x13,0x15,0x19,0x11,0x0E},
+/* 1 */ {0x04,0x0C,0x04,0x04,0x04,0x04,0x0E},
+/* 2 */ {0x0E,0x11,0x01,0x02,0x04,0x08,0x1F},
+/* 3 */ {0x1F,0x02,0x04,0x02,0x01,0x11,0x0E},
+/* 4 */ {0x02,0x06,0x0A,0x12,0x1F,0x02,0x02},
+/* 5 */ {0x1F,0x10,0x1E,0x01,0x01,0x11,0x0E},
+/* 6 */ {0x06,0x08,0x10,0x1E,0x11,0x11,0x0E},
+/* 7 */ {0x1F,0x01,0x02,0x04,0x08,0x08,0x08},
+/* 8 */ {0x0E,0x11,0x11,0x0E,0x11,0x11,0x0E},
+/* 9 */ {0x0E,0x11,0x11,0x0F,0x01,0x02,0x0C},
+/* : */ {0x00,0x0C,0x0C,0x00,0x0C,0x0C,0x00},
+/* ; */ {0x00,0x0C,0x0C,0x00,0x0C,0x04,0x08},
+/* < */ {0x02,0x04,0x08,0x10,0x08,0x04,0x02},
+/* = */ {0x00,0x00,0x1F,0x00,0x1F,0x00,0x00},
+/* > */ {0x08,0x04,0x02,0x01,0x02,0x04,0x08},
+/* ? */ {0x0E,0x11,0x01,0x02,0x04,0x00,0x04},
+/* @ */ {0x0E,0x11,0x01,0x0D,0x15,0x15,0x0E},
+/* A */ {0x0E,0x11,0x11,0x11,0x1F,0x11,0x11},
+/* B */ {0x1E,0x11,0x11,0x1E,0x11,0x11,0x1E},
+/* C */ {0x0E,0x11,0x10,0x10,0x10,0x11,0x0E},
+/* D */ {0x1C,0x12,0x11,0x11,0x11,0x12,0x1C},
+/* E */ {0x1F,0x10,0x10,0x1E,0x10,0x10,0x1F},
+/* F */ {0x1F,0x10,0x10,0x1E,0x10,0x10,0x10},
+/* G */ {0x0E,0x11,0x10,0x17,0x11,0x11,0x0F},
+/* H */ {0x11,0x11,0x11,0x1F,0x11,0x11,0x11},
+/* I */ {0x0E,0x04,0x04,0x04,0x04,0x04,0x0E},
+/* J */ {0x07,0x02,0x02,0x02,0x02,0x12,0x0C},
+/* K */ {0x11,0x12,0x14,0x18,0x14,0x12,0x11},
+/* L */ {0x10,0x10,0x10,0x10,0x10,0x10,0x1F},
+/* M */ {0x11,0x1B,0x15,0x15,0x11,0x11,0x11},
+/* N */ {0x11,0x11,0x19,0x15,0x13,0x11,0x11},
+/* O */ {0x0E,0x11,0x11,0x11,0x11,0x11,0x0E},
+/* P */ {0x1E,0x11,0x11,0x1E,0x10,0x10,0x10},
+/* Q */ {0x0E,0x11,0x11,0x11,0x15,0x12,0x0D},
+/* R */ {0x1E,0x11,0x11,0x1E,0x14,0x12,0x11},
+/* S */ {0x0F,0x10,0x10,0x0E,0x01,0x01,0x1E},
+/* T */ {0x1F,0x04,0x04,0x04,0x04,0x04,0x04},
+/* U */ {0x11,0x11,0x11,0x11,0x11,0x11,0x0E},
+/* V */ {0x11,0x11,0x11,0x11,0x11,0x0A,0x04},
+/* W */ {0x11,0x11,0x11,0x15,0x15,0x15,0x0A},
+/* X */ {0x11,0x11,0x0A,0x04,0x0A,0x11,0x11},
+/* Y */ {0x11,0x11,0x11,0x0A,0x04,0x04,0x04},
+/* Z */ {0x1F,0x01,0x02,0x04,0x08,0x10,0x1F},
+/* [ */ {0x0E,0x08,0x08,0x08,0x08,0x08,0x0E},
+/* \ */ {0x00,0x10,0x08,0x04,0x02,0x01,0x00},
+/* ] */ {0x0E,0x02,0x02,0x02,0x02,0x02,0x0E},
+/* ^ */ {0x04,0x0A,0x11,0x00,0x00,0x00,0x00},
+/* _ */ {0x00,0x00,0x00,0x00,0x00,0x00,0x1F},
+/* ` */ {0x08,0x04,0x02,0x00,0x00,0x00,0x00},
+/* a */ {0x00,0x00,0x0E,0x01,0x0F,0x11,0x0F},
+/* b */ {0x10,0x10,0x10,0x16,0x19,0x11,0x1E},
+/* c */ {0x00,0x00,0x0E,0x10,0x10,0x11,0x0E},
+/* d */ {0x01,0x01,0x01,0x0D,0x13,0x11,0x0F},
+/* e */ {0x00,0x00,0x0E,0x11,0x1F,0x10,0x0E},
+/* f */ {0x06,0x09,0x08,0x1C,0x08,0x08,0x08},
+/* g */ {0x00,0x0F,0x11,0x11,0x0F,0x01,0x0E},
+/* h */ {0x10,0x10,0x16,0x19,0x11,0x11,0x11},
+/* i */ {0x00,0x04,0x00,0x04,0x04,0x04,0x04},
+/* j */ {0x02,0x00,0x06,0x02,0x02,0x12,0x0C},
+/* k */ {0x10,0x10,0x12,0x14,0x18,0x14,0x12},
+/* l */ {0x04,0x04,0x04,0x04,0x04,0x04,0x0F},
+/* m */ {0x00,0x00,0x1A,0x15,0x15,0x11,0x11},
+/* n */ {0x00,0x00,0x16,0x19,0x11,0x11,0x11},
+/* o */ {0x00,0x00,0x0E,0x11,0x11,0x11,0x0E},
+/* p */ {0x00,0x00,0x1E,0x11,0x1E,0x10,0x10},
+/* q */ {0x00,0x00,0x0D,0x13,0x0F,0x01,0x01},
+/* r */ {0x00,0x00,0x16,0x19,0x10,0x10,0x10},
+/* s */ {0x00,0x00,0x0E,0x10,0x0E,0x01,0x1E},
+/* t */ {0x08,0x08,0x1C,0x08,0x08,0x09,0x06},
+/* u */ {0x00,0x00,0x11,0x11,0x11,0x13,0x0D},
+/* v */ {0x00,0x00,0x11,0x11,0x11,0x0A,0x04},
+/* w */ {0x00,0x00,0x11,0x11,0x15,0x15,0x0A},
+/* x */ {0x00,0x00,0x11,0x0A,0x04,0x0A,0x11},
+/* y */ {0x00,0x00,0x11,0x11,0x0F,0x01,0x0E},
+/* z */ {0x00,0x00,0x1F,0x02,0x04,0x08,0x1F},
+/* { */ {0x02,0x04,0x04,0x08,0x04,0x04,0x02},
+/* | */ {0x04,0x04,0x04,0x04,0x04,0x04,0x04},
+/* } */ {0x08,0x04,0x04,0x02,0x04,0x04,0x08},
+};
+
+typedef struct LCDState {
+ SysBusDevice busdev;
+ qemu_irq out[8];
+ DisplayState *ds;
+
+ uint8_t input;
+ uint32_t control : 1;
+ uint32_t rw : 1;
+ uint32_t backlight : 1;
+
+ uint8_t mode8bit : 1;
+ uint8_t write_low : 1;
+
+ uint8_t ac; /* address counter */
+ uint8_t dispcol; /* first visible column (display shift!) */
+ uint8_t id : 1; /* cursor move increase(1)/decrease(0) */
+ uint8_t sh : 1; /* shift display(1) */
+ uint8_t ddram : 1; /* access ddram(1)/cgram(0) */
+
+ uint8_t display : 1;
+ uint8_t cursor : 1;
+ uint8_t blink : 1;
+
+ uint8_t two_lines : 1;
+ uint8_t font5x10 : 1;
+
+ uint8_t need_update : 1;
+ char data[20 * 4];
+} LCDState;
+
+static void draw_char(DisplayState *ds, int x, int y, char ch, uint32_t color, uint32_t backcolor)
+{
+ uint8_t *d;
+ uint8_t cdata;
+ int i, bpp, line;
+
+ bpp = (ds_get_bits_per_pixel(ds) + 7) >> 3;
+ for (line = 0; line < 7 * CZOOM; line++) {
+ d = ds_get_data(ds) + ds_get_linesize(ds) * y + bpp * x;
+ if (ch >= ' ' && (ch - ' ') < sizeof(font5x7)/sizeof(font5x7[0]))
+ cdata = font5x7[(int)(ch - ' ')][line / CZOOM];
+ else
+ cdata = font5x7[0][line / CZOOM];
+ switch(bpp) {
+ case 1:
+ d += 5 * CZOOM;
+ for (i = 0; i < 5 * CZOOM; i++) {
+ *((uint8_t *)d) = (cdata & (1 << (i / CZOOM))) ? color : backcolor;
+ d--;
+ }
+ break;
+ case 2:
+ d += 10 * CZOOM;
+ for (i = 0; i < 5 * CZOOM; i++) {
+ *((uint16_t *)d) = (cdata & (1 << (i / CZOOM))) ? color : backcolor;
+ d -= 2;
+ }
+ break;
+ case 4:
+ d += 20 * CZOOM;
+ for (i = 0; i < 5 * CZOOM; i++) {
+ *((uint32_t *)d) = (cdata & (1 << (i / CZOOM))) ? color : backcolor;
+ d -= 4;
+ }
+ break;
+ }
+ y++;
+ }
+}
+
+static void hd44780_enable(LCDState *s)
+{
+ if (s->control) {
+ //D(printf("CONTROL: %x\n", s->input));
+ if (s->input & LCD_DDRAM) {
+ int ddram_addr = s->input & ~LCD_DDRAM;
+ if (ddram_addr >= 0 && ddram_addr < WIDTH)
+ s->ac = ddram_addr;
+ else if (ddram_addr >= 64 && ddram_addr < 64 + WIDTH)
+ s->ac = (ddram_addr - 64) + WIDTH;
+ else if (ddram_addr >= 20 && ddram_addr < 20 + WIDTH)
+ s->ac = (ddram_addr - 20) + WIDTH * 2;
+ else if (ddram_addr >= 84 && ddram_addr < 84 + WIDTH)
+ s->ac = (ddram_addr - 84) + WIDTH * 3;
+ s->ddram = 1;
+ } else if (s->input & LCD_CGRAM) {
+ s->ac = s->input & ~LCD_CGRAM;
+ s->ddram = 0;
+ } else if (s->input & LCD_FUNCTION) {
+ s->mode8bit = !!(s->input & LCD_FUNCTION_8BIT);
+ s->two_lines = !!(s->input & LCD_FUNCTION_2LINES);
+ s->font5x10 = !!(s->input & LCD_FUNCTION_10DOTS);
+ } else if (s->input & LCD_MOVE) {
+ if (s->input & LCD_MOVE_DISP) {
+ if (s->input & LCD_MOVE_RIGHT) {
+ s->dispcol--;
+ } else {
+ s->dispcol++;
+ }
+ s->dispcol %= sizeof(s->data);
+ } else {
+ // ...
+ }
+ } else if (s->input & LCD_ON_CTRL) {
+ s->display = !!(s->input & LCD_ON_DISPLAY);
+ s->cursor = !!(s->input & LCD_ON_CURSOR);
+ s->blink = !!(s->input & LCD_ON_BLINK);
+ } else if (s->input & LCD_ENTRY_MODE) {
+ s->id = !!(s->input & LCD_ENTRY_INC);
+ s->sh = !!(s->input & LCD_ENTRY_SHIFT);
+ } else if (s->input & LCD_HOME) {
+ s->ac = 0;
+ s->dispcol = 0;
+ s->ddram = 1;
+ } else if (s->input & LCD_CLR) {
+ memset(s->data, 32, sizeof(s->data));
+ s->ac = 0;
+ s->dispcol = 0;
+ s->id = 1;
+ s->ddram = 1;
+ }
+ } else {
+ if (s->ddram) {
+ s->data[s->ac] = s->input;
+ s->ac++;
+ s->ac %= sizeof(s->data);
+ if (s->sh) {
+ if (s->id)
+ s->dispcol++;
+ else
+ s->dispcol--;
+ s->dispcol %= sizeof(s->data);
+ }
+ s->need_update = 1;
+ } else {
+ // ...
+ }
+ }
+}
+
+static void hd44780_set_pin(void *opaque, int pin, int level)
+{
+ LCDState *s = opaque;
+
+ if (pin >= 0 && pin <= 7) {
+ if (!s->rw) {
+ if (!s->mode8bit && s->write_low)
+ pin -= 4;
+ if (level)
+ s->input |= 1 << pin;
+ else
+ s->input &= ~(1 << pin);
+ }
+ } else if (pin == PIN_RS) {
+ s->control = !level;
+ } else if (pin == PIN_RW) {
+ s->rw = level;
+ } else if (pin == PIN_E) {
+ if (!level && !s->rw) {
+ if (!s->mode8bit) {
+ s->write_low = !s->write_low;
+ if (!s->write_low)
+ hd44780_enable(s);
+ } else {
+ hd44780_enable(s);
+ }
+ }
+ } else if (pin == PIN_BL) {
+ s->backlight = level;
+ s->need_update = 1;
+ }
+}
+
+static void hd44780_update_display(void *opaque)
+{
+ LCDState *s = opaque;
+ uint32_t color_segment, color_led;
+ int y, x, r, g, b;
+
+ if (s->need_update) {
+ if (s->backlight) {
+ r = 0;
+ g = 0xff;
+ b = 0x80;
+ } else {
+ r = 0xf0;
+ g = 0xe0;
+ b = 0xb0;
+ }
+
+ switch (ds_get_bits_per_pixel(s->ds)) {
+ case 8:
+ color_segment = rgb_to_pixel8(0, 0, 0);
+ color_led = rgb_to_pixel8(r, g, b);
+ break;
+ case 15:
+ color_segment = rgb_to_pixel15(0, 0, 0);
+ color_led = rgb_to_pixel15(r, g, b);
+ break;
+ case 16:
+ color_segment = rgb_to_pixel16(0, 0, 0);
+ color_led = rgb_to_pixel16(r, g, b);
+ break;
+ case 24:
+ color_segment = rgb_to_pixel24(0, 0, 0);
+ color_led = rgb_to_pixel24(r, g, b);
+ break;
+ case 32:
+ color_segment = rgb_to_pixel32(0, 0, 0);
+ color_led = rgb_to_pixel32(r, g, b);
+ break;
+ default:
+ return;
+ }
+
+ if (s->display) {
+ for (y = 0; y < HEIGHT; y++) {
+ for (x = 0; x < WIDTH; x++) {
+ draw_char(s->ds, x * 5 * CZOOM, y * 7 * CZOOM, s->data[y * WIDTH + x], color_segment, color_led);
+ }
+ }
+ }
+
+ dpy_update(s->ds, 0, 0, WIDTH * CZOOM * 5, HEIGHT * CZOOM * 7);
+ }
+}
+
+static void hd44780_invalidate_display(void * opaque)
+{
+ LCDState *s = opaque;
+ s->need_update = 1;
+}
+
+static void hd44780_init(SysBusDevice *dev)
+{
+ LCDState *s = FROM_SYSBUS(LCDState, dev);
+
+ s->need_update = 1;
+
+ qdev_init_gpio_in(&dev->qdev, hd44780_set_pin, 12);
+ qdev_init_gpio_out(&dev->qdev, s->out, 8);
+
+ s->ds = graphic_console_init(hd44780_update_display,
+ hd44780_invalidate_display,
+ NULL, NULL, s);
+ qemu_console_resize(s->ds, WIDTH * CZOOM * 5, HEIGHT * CZOOM * 7);
+}
+
+static void hd44780_register(void)
+{
+ sysbus_register_dev("gpio,hd44780", sizeof(LCDState),
+ hd44780_init);
+}
+
+device_init(hd44780_register)
--
1.6.3.msysgit.0
reply other threads:[~2009-07-15 14:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1MR5qa-0006te-9N@lists.gnu.org \
--to=filip.navara@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.