From: linux@arm.linux.org.uk (Russell King - ARM Linux)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 06/11] ARM: realview: remove old AMBA device DMA definitions
Date: Thu, 27 Jan 2011 13:47:48 +0000 [thread overview]
Message-ID: <E1PiSCS-0003pD-3F@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20110127134532.GE25968@n2100.arm.linux.org.uk>
The AMBA DMA macro definitions are not used, and the AMBA Primecell DMA
support makes no use of them either, so they can be removed.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
arch/arm/mach-realview/core.h | 1 -
arch/arm/mach-realview/realview_eb.c | 21 ---------------------
arch/arm/mach-realview/realview_pb1176.c | 21 ---------------------
arch/arm/mach-realview/realview_pb11mp.c | 21 ---------------------
arch/arm/mach-realview/realview_pba8.c | 21 ---------------------
arch/arm/mach-realview/realview_pbx.c | 21 ---------------------
6 files changed, 0 insertions(+), 106 deletions(-)
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 27c9273..5c83d1e 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -42,7 +42,6 @@ static struct amba_device name##_device = { \
}, \
.dma_mask = ~0, \
.irq = base##_IRQ, \
- /* .dma = base##_DMA,*/ \
}
struct machine_desc;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index c00e527..d0f851b 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -144,60 +144,39 @@ static struct pl022_ssp_controller ssp0_plat_data = {
* These devices are connected via the core APB bridge
*/
#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define EB_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define EB_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
/*
* These devices are connected via the core APB bridge
*/
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_WATCHDOG_DMA { 0, 0 }
#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define EB_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
-#define EB_RTC_DMA { 0, 0 }
/*
* These devices are connected via the DMA APB bridge
*/
#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
-#define SCI_DMA { 7, 6 }
#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART0_DMA { 15, 14 }
#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART1_DMA { 13, 12 }
#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART2_DMA { 11, 10 }
#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define EB_UART3_DMA { 0x86, 0x87 }
#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
-#define EB_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index f0447bb..61f6a9d 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -134,47 +134,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
* RealView PB1176 AMBA devices
*/
#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define PB1176_CLCD_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_WATCHDOG_DMA { 0, 0 }
#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
-#define PB1176_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
-#define PB1176_RTC_DMA { 0, 0 }
#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
-#define SCI_DMA { 7, 6 }
#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART0_DMA { 15, 14 }
#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART1_DMA { 13, 12 }
#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART2_DMA { 11, 10 }
#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART3_DMA { 0x86, 0x87 }
#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_UART4_DMA { 0, 0 }
#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
-#define PB1176_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 3b4f788..27bfeca 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -136,47 +136,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
*/
#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
-#define PB11MP_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_WATCHDOG_DMA { 0, 0 }
#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define PB11MP_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
-#define PB11MP_RTC_DMA { 0, 0 }
#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
-#define SCI_DMA { 7, 6 }
#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART0_DMA { 15, 14 }
#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART1_DMA { 13, 12 }
#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART2_DMA { 11, 10 }
#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_UART3_DMA { 0x86, 0x87 }
#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
-#define PB11MP_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index f98d4fa..11972df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -126,47 +126,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
*/
#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
-#define PBA8_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_WATCHDOG_DMA { 0, 0 }
#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
-#define PBA8_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
-#define PBA8_RTC_DMA { 0, 0 }
#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
-#define SCI_DMA { 7, 6 }
#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART0_DMA { 15, 14 }
#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART1_DMA { 13, 12 }
#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART2_DMA { 11, 10 }
#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_UART3_DMA { 0x86, 0x87 }
#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
-#define PBA8_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index b0521e1..73ab3ca 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -148,47 +148,26 @@ static struct pl022_ssp_controller ssp0_plat_data = {
*/
#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
-#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
-#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
-#define KMI1_DMA { 0, 0 }
#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_DMA { 0, 0 }
#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
-#define PBX_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
-#define DMAC_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define SCTL_DMA { 0, 0 }
#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_WATCHDOG_DMA { 0, 0 }
#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
-#define PBX_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
-#define GPIO1_DMA { 0, 0 }
#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
-#define PBX_RTC_DMA { 0, 0 }
#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
-#define SCI_DMA { 7, 6 }
#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART0_DMA { 15, 14 }
#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART1_DMA { 13, 12 }
#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART2_DMA { 11, 10 }
#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_UART3_DMA { 0x86, 0x87 }
#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
-#define PBX_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
--
1.6.2.5
next prev parent reply other threads:[~2011-01-27 13:47 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-27 13:45 [PATCH 00/11] Rationalize and consolidate ARMs evaluation boards Russell King - ARM Linux
2011-01-27 13:46 ` [PATCH 01/11] ARM: integrator: use new init_early for clock tree init Russell King - ARM Linux
2011-02-04 19:27 ` Rob Herring
2011-02-04 19:31 ` Grant Likely
2011-02-04 19:34 ` Russell King - ARM Linux
2011-02-04 19:53 ` Rob Herring
2011-02-04 19:59 ` Russell King - ARM Linux
2011-01-27 13:46 ` [PATCH 02/11] ARM: versatile: use new init_early for clock tree and sched_clock init Russell King - ARM Linux
2011-01-27 13:46 ` [PATCH 03/11] ARM: realview: " Russell King - ARM Linux
2011-01-27 13:47 ` [PATCH 04/11] ARM: vexpress: " Russell King - ARM Linux
2011-01-27 13:47 ` [PATCH 05/11] ARM: versatile: remove old AMBA device DMA definitions Russell King - ARM Linux
2011-01-27 13:47 ` Russell King - ARM Linux [this message]
2011-01-27 14:40 ` [PATCH 06/11] ARM: realview: " Linus Walleij
2011-01-27 13:48 ` [PATCH 07/11] ARM: rationalize versatile family Kconfig/Makefile Russell King - ARM Linux
2011-01-27 13:48 ` [PATCH 08/11] ARM: integrator/versatile: consolidate FPGA IRQ handling code Russell King - ARM Linux
2011-01-27 13:48 ` [PATCH 09/11] ARM: realview/vexpress: consolidate localtimer support Russell King - ARM Linux
2011-01-27 13:49 ` [PATCH 10/11] ARM: realview/vexpress: consolidate SMP bringup code Russell King - ARM Linux
2011-01-27 13:49 ` [PATCH 11/11] ARM: integrator: add Integrator/CP sched_clock support Russell King - ARM Linux
2011-02-18 11:34 ` [PATCH 00/11] Rationalize and consolidate ARMs evaluation boards Catalin Marinas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1PiSCS-0003pD-3F@rmk-PC.arm.linux.org.uk \
--to=linux@arm.linux.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.