From: Russell King <rmk+kernel@arm.linux.org.uk>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Subject: [PATCH] drm: omapdrm: fix compiler errors
Date: Sat, 12 Jul 2014 10:53:41 +0100 [thread overview]
Message-ID: <E1X5tzx-00041J-RQ@rmk-PC.arm.linux.org.uk> (raw)
Regular randconfig nightly testing has detected problems with omapdrm.
omapdrm fails to build when the kernel is built to support 64-bit DMA
addresses and/or 64-bit physical addresses due to an assumption about
the width of these types.
Use %pad to print DMA addresses, rather than %x or %Zx (which is even
more wrong than %x). Avoid passing a uint32_t pointer into a function
which expects dma_addr_t pointer.
drivers/gpu/drm/omapdrm/omap_plane.c: In function 'omap_plane_pre_apply':
drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_plane.c:145:2: error: format '%x' expects argument of type 'unsigned int', but argument 6 has type 'dma_addr_t' [-Werror=format]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_plane.o] Error 1
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_get_paddr':
drivers/gpu/drm/omapdrm/omap_gem.c:794:4: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_describe':
drivers/gpu/drm/omapdrm/omap_gem.c:991:4: error: format '%Zx' expects argument of type 'size_t', but argument 7 has type 'dma_addr_t' [-Werror=format]
drivers/gpu/drm/omapdrm/omap_gem.c: In function 'omap_gem_init':
drivers/gpu/drm/omapdrm/omap_gem.c:1470:4: error: format '%x' expects argument of type 'unsigned int', but argument 7 has type 'dma_addr_t' [-Werror=format]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_gem.o] Error 1
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c: In function 'dmm_txn_append':
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:226:2: error: passing argument 3 of 'alloc_dma' from incompatible pointer type [-Werror]
make[5]: *** [drivers/gpu/drm/omapdrm/omap_dmm_tiler.o] Error 1
make[5]: Target `__build' not remade because of errors.
make[4]: *** [drivers/gpu/drm/omapdrm] Error 2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 6 ++++--
drivers/gpu/drm/omapdrm/omap_gem.c | 10 +++++-----
drivers/gpu/drm/omapdrm/omap_plane.c | 4 ++--
3 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
index f926b4caf449..56c60552abba 100644
--- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
+++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c
@@ -199,7 +199,7 @@ static struct dmm_txn *dmm_txn_init(struct dmm *dmm, struct tcm *tcm)
static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
struct page **pages, uint32_t npages, uint32_t roll)
{
- dma_addr_t pat_pa = 0;
+ dma_addr_t pat_pa = 0, data_pa = 0;
uint32_t *data;
struct pat *pat;
struct refill_engine *engine = txn->engine_handle;
@@ -223,7 +223,9 @@ static void dmm_txn_append(struct dmm_txn *txn, struct pat_area *area,
.lut_id = engine->tcm->lut_id,
};
- data = alloc_dma(txn, 4*i, &pat->data_pa);
+ data = alloc_dma(txn, 4*i, &data_pa);
+ /* FIXME: what if data_pa is more than 32-bit ? */
+ pat->data_pa = data_pa;
while (i--) {
int n = i + roll;
diff --git a/drivers/gpu/drm/omapdrm/omap_gem.c b/drivers/gpu/drm/omapdrm/omap_gem.c
index 95dbce286a41..d9f5e5241af4 100644
--- a/drivers/gpu/drm/omapdrm/omap_gem.c
+++ b/drivers/gpu/drm/omapdrm/omap_gem.c
@@ -791,7 +791,7 @@ int omap_gem_get_paddr(struct drm_gem_object *obj,
omap_obj->paddr = tiler_ssptr(block);
omap_obj->block = block;
- DBG("got paddr: %08x", omap_obj->paddr);
+ DBG("got paddr: %pad", &omap_obj->paddr);
}
omap_obj->paddr_cnt++;
@@ -985,9 +985,9 @@ void omap_gem_describe(struct drm_gem_object *obj, struct seq_file *m)
off = drm_vma_node_start(&obj->vma_node);
- seq_printf(m, "%08x: %2d (%2d) %08llx %08Zx (%2d) %p %4d",
+ seq_printf(m, "%08x: %2d (%2d) %08llx %pad (%2d) %p %4d",
omap_obj->flags, obj->name, obj->refcount.refcount.counter,
- off, omap_obj->paddr, omap_obj->paddr_cnt,
+ off, &omap_obj->paddr, omap_obj->paddr_cnt,
omap_obj->vaddr, omap_obj->roll);
if (omap_obj->flags & OMAP_BO_TILED) {
@@ -1467,8 +1467,8 @@ void omap_gem_init(struct drm_device *dev)
entry->paddr = tiler_ssptr(block);
entry->block = block;
- DBG("%d:%d: %dx%d: paddr=%08x stride=%d", i, j, w, h,
- entry->paddr,
+ DBG("%d:%d: %dx%d: paddr=%pad stride=%d", i, j, w, h,
+ &entry->paddr,
usergart[i].stride_pfn << PAGE_SHIFT);
}
}
diff --git a/drivers/gpu/drm/omapdrm/omap_plane.c b/drivers/gpu/drm/omapdrm/omap_plane.c
index 3cf31ee59aac..6af3398b5278 100644
--- a/drivers/gpu/drm/omapdrm/omap_plane.c
+++ b/drivers/gpu/drm/omapdrm/omap_plane.c
@@ -142,8 +142,8 @@ static void omap_plane_pre_apply(struct omap_drm_apply *apply)
DBG("%dx%d -> %dx%d (%d)", info->width, info->height,
info->out_width, info->out_height,
info->screen_width);
- DBG("%d,%d %08x %08x", info->pos_x, info->pos_y,
- info->paddr, info->p_uv_addr);
+ DBG("%d,%d %pad %pad", info->pos_x, info->pos_y,
+ &info->paddr, &info->p_uv_addr);
/* TODO: */
ilace = false;
--
1.8.3.1
next reply other threads:[~2014-07-12 9:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-12 9:53 Russell King [this message]
2014-07-30 11:08 ` [PATCH] drm: omapdrm: fix compiler errors Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1X5tzx-00041J-RQ@rmk-PC.arm.linux.org.uk \
--to=rmk+kernel@arm.linux.org.uk \
--cc=dri-devel@lists.freedesktop.org \
--cc=tomi.valkeinen@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.