* [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-13 18:57 ` Russell King
0 siblings, 0 replies; 6+ messages in thread
From: Russell King @ 2017-01-13 18:57 UTC (permalink / raw)
To: linux-arm-kernel
Testing with an Armada 8040 board shows that adding the generic-ahci
compatible to the CP110 AHCI nodes gets us working AHCI on the board.
A previous patch series posted by Thomas Petazzoni was retracted when
it was realised that the IP was supposed to be, and is, compatible
with the standard register layout.
Add this compatible.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 464b491c7291..65ad781d7910 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -128,7 +128,8 @@
};
cpm_sata0: sata at 540000 {
- compatible = "marvell,armada-8k-ahci";
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_syscon0 1 15>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index b10f4781d8fb..168d667d50a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -128,7 +128,8 @@
};
cps_sata0: sata at 540000 {
- compatible = "marvell,armada-8k-ahci";
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cps_syscon0 1 15>;
--
2.7.4
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-13 18:57 ` Russell King
0 siblings, 0 replies; 6+ messages in thread
From: Russell King @ 2017-01-13 18:57 UTC (permalink / raw)
To: Gregory Clement
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
Testing with an Armada 8040 board shows that adding the generic-ahci
compatible to the CP110 AHCI nodes gets us working AHCI on the board.
A previous patch series posted by Thomas Petazzoni was retracted when
it was realised that the IP was supposed to be, and is, compatible
with the standard register layout.
Add this compatible.
Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
---
arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 464b491c7291..65ad781d7910 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
@@ -128,7 +128,8 @@
};
cpm_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci";
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpm_syscon0 1 15>;
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index b10f4781d8fb..168d667d50a3 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
@@ -128,7 +128,8 @@
};
cps_sata0: sata@540000 {
- compatible = "marvell,armada-8k-ahci";
+ compatible = "marvell,armada-8k-ahci",
+ "generic-ahci";
reg = <0x540000 0x30000>;
interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cps_syscon0 1 15>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-16 12:06 ` Mark Rutland
0 siblings, 0 replies; 6+ messages in thread
From: Mark Rutland @ 2017-01-16 12:06 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Jan 13, 2017 at 06:57:39PM +0000, Russell King wrote:
> Testing with an Armada 8040 board shows that adding the generic-ahci
> compatible to the CP110 AHCI nodes gets us working AHCI on the board.
> A previous patch series posted by Thomas Petazzoni was retracted when
> it was realised that the IP was supposed to be, and is, compatible
> with the standard register layout.
>
> Add this compatible.
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Assuming the above is correct this looks sane to me. FWIW:
Acked-by: Mark Rutland <mark.rutland@arm.com>
Mark.
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 464b491c7291..65ad781d7910 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cpm_sata0: sata at 540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cpm_syscon0 1 15>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index b10f4781d8fb..168d667d50a3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cps_sata0: sata at 540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cps_syscon0 1 15>;
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-16 12:06 ` Mark Rutland
0 siblings, 0 replies; 6+ messages in thread
From: Mark Rutland @ 2017-01-16 12:06 UTC (permalink / raw)
To: Russell King
Cc: Gregory Clement, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Rob Herring, Catalin Marinas, Will Deacon,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA, Thomas Petazzoni
On Fri, Jan 13, 2017 at 06:57:39PM +0000, Russell King wrote:
> Testing with an Armada 8040 board shows that adding the generic-ahci
> compatible to the CP110 AHCI nodes gets us working AHCI on the board.
> A previous patch series posted by Thomas Petazzoni was retracted when
> it was realised that the IP was supposed to be, and is, compatible
> with the standard register layout.
>
> Add this compatible.
>
> Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
Assuming the above is correct this looks sane to me. FWIW:
Acked-by: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Mark.
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 464b491c7291..65ad781d7910 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cpm_sata0: sata@540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cpm_syscon0 1 15>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index b10f4781d8fb..168d667d50a3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cps_sata0: sata@540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cps_syscon0 1 15>;
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-27 10:49 ` Gregory CLEMENT
0 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2017-01-27 10:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Russell,
On ven., janv. 13 2017, Russell King <rmk+kernel@armlinux.org.uk> wrote:
> Testing with an Armada 8040 board shows that adding the generic-ahci
> compatible to the CP110 AHCI nodes gets us working AHCI on the board.
> A previous patch series posted by Thomas Petazzoni was retracted when
> it was realised that the IP was supposed to be, and is, compatible
> with the standard register layout.
>
> Add this compatible.
Applied on mvebu/dt64
(not that it didn't apply cleanly on the mainline because in mainline we
don't use yet the ICU for the interrupt)
Thanks,
Gregory
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 464b491c7291..65ad781d7910 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cpm_sata0: sata at 540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cpm_syscon0 1 15>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index b10f4781d8fb..168d667d50a3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cps_sata0: sata at 540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cps_syscon0 1 15>;
> --
> 2.7.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
@ 2017-01-27 10:49 ` Gregory CLEMENT
0 siblings, 0 replies; 6+ messages in thread
From: Gregory CLEMENT @ 2017-01-27 10:49 UTC (permalink / raw)
To: Russell King
Cc: Jason Cooper, Andrew Lunn, Sebastian Hesselbarth, Rob Herring,
Mark Rutland, Catalin Marinas, Will Deacon,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
devicetree-u79uwXL29TY76Z2rM5mHXA
Hi Russell,
On ven., janv. 13 2017, Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org> wrote:
> Testing with an Armada 8040 board shows that adding the generic-ahci
> compatible to the CP110 AHCI nodes gets us working AHCI on the board.
> A previous patch series posted by Thomas Petazzoni was retracted when
> it was realised that the IP was supposed to be, and is, compatible
> with the standard register layout.
>
> Add this compatible.
Applied on mvebu/dt64
(not that it didn't apply cleanly on the mainline because in mainline we
don't use yet the ICU for the interrupt)
Thanks,
Gregory
>
> Signed-off-by: Russell King <rmk+kernel-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>
> ---
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 3 ++-
> arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> index 464b491c7291..65ad781d7910 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cpm_sata0: sata@540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cpm_syscon0 1 15>;
> diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> index b10f4781d8fb..168d667d50a3 100644
> --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
> @@ -128,7 +128,8 @@
> };
>
> cps_sata0: sata@540000 {
> - compatible = "marvell,armada-8k-ahci";
> + compatible = "marvell,armada-8k-ahci",
> + "generic-ahci";
> reg = <0x540000 0x30000>;
> interrupts = <ICU_GRP_NSR 107 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&cps_syscon0 1 15>;
> --
> 2.7.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-01-27 10:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-01-13 18:57 [PATCH] arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci Russell King
2017-01-13 18:57 ` Russell King
2017-01-16 12:06 ` Mark Rutland
2017-01-16 12:06 ` Mark Rutland
2017-01-27 10:49 ` Gregory CLEMENT
2017-01-27 10:49 ` Gregory CLEMENT
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.