From: Mark Brown <broonie@kernel.org>
To: Jeeja KP <jeeja.kp@intel.com>
Cc: alsa-devel@alsa-project.org, Vinod Koul <vinod.koul@intel.com>,
patches.audio@intel.com, tiwai@suse.de, broonie@kernel.org,
liam.r.girdwood@intel.com
Subject: Applied "ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability" to the asoc tree
Date: Wed, 29 Mar 2017 12:54:35 +0100 [thread overview]
Message-ID: <E1ctCBP-0001bc-Td@debutante> (raw)
In-Reply-To: <1490275926-2270-3-git-send-email-jeeja.kp@intel.com>
The patch
ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
>From 7f975a385b9313a03c13fb0be0a129c626f9a54e Mon Sep 17 00:00:00 2001
From: Jeeja KP <jeeja.kp@intel.com>
Date: Fri, 24 Mar 2017 23:10:25 +0530
Subject: [PATCH] ASoC: Intel: Skylake: Use the sig_bits to define dai bps
capability
For calculating the HDA DMA format, use the max_bps supported by the
DAI caps instead of fixing it to 32/24. For host DMA the Max bps support
is 32, but in case of link DMA, this depends on the codec capability.
So use the sig_bits to define the bps supported by dai.
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
sound/soc/intel/skylake/skl-pcm.c | 25 ++++++++++++++++++++++---
sound/soc/intel/skylake/skl-topology.c | 2 ++
sound/soc/intel/skylake/skl-topology.h | 2 ++
3 files changed, 26 insertions(+), 3 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c
index 2f90bc40be77..3c61dbab3d4f 100644
--- a/sound/soc/intel/skylake/skl-pcm.c
+++ b/sound/soc/intel/skylake/skl-pcm.c
@@ -155,7 +155,7 @@ int skl_pcm_host_dma_prepare(struct device *dev, struct skl_pipe_params *params)
snd_hdac_ext_stream_decouple(ebus, stream, true);
format_val = snd_hdac_calc_stream_format(params->s_freq,
- params->ch, params->format, 32, 0);
+ params->ch, params->format, params->host_bps, 0);
dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
format_val, params->s_freq, params->ch, params->format);
@@ -190,8 +190,8 @@ int skl_pcm_link_dma_prepare(struct device *dev, struct skl_pipe_params *params)
stream = stream_to_hdac_ext_stream(hstream);
snd_hdac_ext_stream_decouple(ebus, stream, true);
- format_val = snd_hdac_calc_stream_format(params->s_freq,
- params->ch, params->format, 24, 0);
+ format_val = snd_hdac_calc_stream_format(params->s_freq, params->ch,
+ params->format, params->link_bps, 0);
dev_dbg(dev, "format_val=%d, rate=%d, ch=%d, format=%d\n",
format_val, params->s_freq, params->ch, params->format);
@@ -309,6 +309,11 @@ static int skl_pcm_hw_params(struct snd_pcm_substream *substream,
p_params.host_dma_id = dma_id;
p_params.stream = substream->stream;
p_params.format = params_format(params);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ p_params.host_bps = dai->driver->playback.sig_bits;
+ else
+ p_params.host_bps = dai->driver->capture.sig_bits;
+
m_cfg = skl_tplg_fe_get_cpr_module(dai, p_params.stream);
if (m_cfg)
@@ -547,6 +552,11 @@ static int skl_link_hw_params(struct snd_pcm_substream *substream,
p_params.link_index = link->index;
p_params.format = params_format(params);
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ p_params.link_bps = codec_dai->driver->playback.sig_bits;
+ else
+ p_params.link_bps = codec_dai->driver->capture.sig_bits;
+
return skl_tplg_be_update_params(dai, &p_params);
}
@@ -652,6 +662,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_8000,
.formats = SNDRV_PCM_FMTBIT_S16_LE |
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
.capture = {
.stream_name = "System Capture",
@@ -659,6 +670,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -670,6 +682,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_QUAD,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -681,6 +694,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -692,6 +706,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_STEREO,
.rates = SNDRV_PCM_RATE_48000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -703,6 +718,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
.channels_max = HDA_QUAD,
.rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_16000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE,
+ .sig_bits = 32,
},
},
{
@@ -718,6 +734,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
{
@@ -733,6 +750,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
{
@@ -748,6 +766,7 @@ static struct snd_soc_dai_driver skl_platform_dai[] = {
SNDRV_PCM_RATE_192000,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE |
SNDRV_PCM_FMTBIT_S32_LE,
+ .sig_bits = 32,
},
},
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c
index c6bd4bb49ec0..43f9cb380a76 100644
--- a/sound/soc/intel/skylake/skl-topology.c
+++ b/sound/soc/intel/skylake/skl-topology.c
@@ -1242,10 +1242,12 @@ static void skl_tplg_fill_dma_id(struct skl_module_cfg *mcfg,
case SKL_DEVICE_HDALINK:
pipe->p_params->link_dma_id = params->link_dma_id;
pipe->p_params->link_index = params->link_index;
+ pipe->p_params->link_bps = params->link_bps;
break;
case SKL_DEVICE_HDAHOST:
pipe->p_params->host_dma_id = params->host_dma_id;
+ pipe->p_params->host_bps = params->host_bps;
break;
default:
diff --git a/sound/soc/intel/skylake/skl-topology.h b/sound/soc/intel/skylake/skl-topology.h
index fefab0e99a3b..bf2c63b4ab83 100644
--- a/sound/soc/intel/skylake/skl-topology.h
+++ b/sound/soc/intel/skylake/skl-topology.h
@@ -257,6 +257,8 @@ struct skl_pipe_params {
snd_pcm_format_t format;
int link_index;
int stream;
+ unsigned int host_bps;
+ unsigned int link_bps;
};
struct skl_pipe {
--
2.11.0
next prev parent reply other threads:[~2017-03-29 11:54 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-23 13:31 [PATCH 00/11] ASoC: Intel: Skylake: More driver updates jeeja.kp
2017-03-23 13:31 ` [PATCH 01/11] ALSA: hda: Fix LLCH register read jeeja.kp
2017-03-29 11:02 ` Applied "ALSA: hda: Fix LLCH register read" to the asoc tree Mark Brown
2017-03-23 13:31 ` [PATCH 02/11] ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability jeeja.kp
2017-03-29 11:54 ` Mark Brown [this message]
2017-03-23 13:31 ` [PATCH 03/11] ASoC: hdac_hdmi: Update sig_bits based on converter capability jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: hdac_hdmi: Update sig_bits based on converter capability" to the asoc tree Mark Brown
2017-03-23 13:31 ` [PATCH 04/11] ASoC: Intel: Skylake: Add 16-bit constraint to FE bxt_rt298 machine jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: Add 16-bit constraint to FE bxt_rt298 machine" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 05/11] ASoC: Intel: Skylake: Don't unload module when in use jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: Don't unload module when in use" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 06/11] ASoC: Intel: Skylake: Remove redundant vmixer handler jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: Remove redundant vmixer handler" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 07/11] ASoC: Intel: Skylake: remove hard coded ACPI path jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: remove hard coded ACPI path" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 08/11] ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST library jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST library" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 09/11] ASoC: Intel: Skylake: Fix DMA position reporting for capture stream jeeja.kp
2017-03-23 14:12 ` Pierre-Louis Bossart
2017-03-23 15:08 ` Ughreja, Rakesh A
2017-03-23 15:31 ` Pierre-Louis Bossart
2017-03-23 13:32 ` [PATCH 10/11] ASoC: Intel: Skylake: Fix module state after unbind and delete jeeja.kp
2017-03-29 11:54 ` Applied "ASoC: Intel: Skylake: Fix module state after unbind and delete" to the asoc tree Mark Brown
2017-03-23 13:32 ` [PATCH 11/11] ASoC: Intel: Skylake: Add support for deferred DSP module bind jeeja.kp
2017-04-12 16:00 ` Applied "ASoC: Intel: Skylake: Add support for deferred DSP module bind" to the asoc tree Mark Brown
2017-03-27 3:22 ` [PATCH 00/11] ASoC: Intel: Skylake: More driver updates Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1ctCBP-0001bc-Td@debutante \
--to=broonie@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=jeeja.kp@intel.com \
--cc=liam.r.girdwood@intel.com \
--cc=patches.audio@intel.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.