[PATCH] Revert "net: phy: marvell: avoid pause mode on SGMII-to-Copper for 88e151x"

[Russell King <rmk+kernel@armlinux.org.uk>]

This reverts commit 6623c0fba10ef45b64ca213ad5dec926f37fa9a0.

The original diagnosis was incorrect: it appears that the NIC had
PHY polling mode enabled, which meant that it overwrote the PHYs
advertisement register during negotiation.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/marvell.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index cbec296107bd..d29c0c3d0c3e 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -847,8 +847,6 @@ static int m88e1510_config_init(struct phy_device *phydev)
 
 	/* SGMII-to-Copper mode initialization */
 	if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
-		u32 pause;
-
 		/* Select page 18 */
 		err = marvell_set_page(phydev, 18);
 		if (err < 0)
@@ -871,16 +869,6 @@ static int m88e1510_config_init(struct phy_device *phydev)
 		err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
 		if (err < 0)
 			return err;
-
-		/* There appears to be a bug in the 88e1512 when used in
-		 * SGMII to copper mode, where the AN advertisement register
-		 * clears the pause bits each time a negotiation occurs.
-		 * This means we can never be truely sure what was advertised,
-		 * so disable Pause support.
-		 */
-		pause = SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-		phydev->supported &= ~pause;
-		phydev->advertising &= ~pause;
 	}
 
 	return m88e1318_config_init(phydev);
-- 
2.7.4