From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Marcin Wojtas <mw@semihalf.com>,
netdev@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH net-next 3/7] net: mvpp2: use .mac_select_pcs() interface
Date: Tue, 14 Dec 2021 14:48:15 +0000 [thread overview]
Message-ID: <E1mx96F-00GCdL-I5@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <Ybiue1TPCwsdHmV4@shell.armlinux.org.uk>
Use the mac_select_pcs() method to choose between the GMAC and XLG
PCS implementations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2.h | 3 +-
.../net/ethernet/marvell/mvpp2/mvpp2_main.c | 75 ++++++++++---------
2 files changed, 42 insertions(+), 36 deletions(-)
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index cf8acabb90ac..ad73a488fc5f 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -1239,7 +1239,8 @@ struct mvpp2_port {
phy_interface_t phy_interface;
struct phylink *phylink;
struct phylink_config phylink_config;
- struct phylink_pcs phylink_pcs;
+ struct phylink_pcs pcs_gmac;
+ struct phylink_pcs pcs_xlg;
struct phy *comphy;
struct mvpp2_bm_pool *pool_long;
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 8e5820d12362..f5e10fe7812b 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -6118,15 +6118,20 @@ static struct mvpp2_port *mvpp2_phylink_to_port(struct phylink_config *config)
return container_of(config, struct mvpp2_port, phylink_config);
}
-static struct mvpp2_port *mvpp2_pcs_to_port(struct phylink_pcs *pcs)
+static struct mvpp2_port *mvpp2_pcs_xlg_to_port(struct phylink_pcs *pcs)
{
- return container_of(pcs, struct mvpp2_port, phylink_pcs);
+ return container_of(pcs, struct mvpp2_port, pcs_xlg);
+}
+
+static struct mvpp2_port *mvpp2_pcs_gmac_to_port(struct phylink_pcs *pcs)
+{
+ return container_of(pcs, struct mvpp2_port, pcs_gmac);
}
static void mvpp2_xlg_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
- struct mvpp2_port *port = mvpp2_pcs_to_port(pcs);
+ struct mvpp2_port *port = mvpp2_pcs_xlg_to_port(pcs);
u32 val;
if (port->phy_interface == PHY_INTERFACE_MODE_5GBASER)
@@ -6164,7 +6169,7 @@ static const struct phylink_pcs_ops mvpp2_phylink_xlg_pcs_ops = {
static void mvpp2_gmac_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
- struct mvpp2_port *port = mvpp2_pcs_to_port(pcs);
+ struct mvpp2_port *port = mvpp2_pcs_gmac_to_port(pcs);
u32 val;
val = readl(port->base + MVPP2_GMAC_STATUS0);
@@ -6201,7 +6206,7 @@ static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
- struct mvpp2_port *port = mvpp2_pcs_to_port(pcs);
+ struct mvpp2_port *port = mvpp2_pcs_gmac_to_port(pcs);
u32 mask, val, an, old_an, changed;
mask = MVPP2_GMAC_IN_BAND_AUTONEG_BYPASS |
@@ -6255,7 +6260,7 @@ static int mvpp2_gmac_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
static void mvpp2_gmac_pcs_an_restart(struct phylink_pcs *pcs)
{
- struct mvpp2_port *port = mvpp2_pcs_to_port(pcs);
+ struct mvpp2_port *port = mvpp2_pcs_gmac_to_port(pcs);
u32 val = readl(port->base + MVPP2_GMAC_AUTONEG_CONFIG);
writel(val | MVPP2_GMAC_IN_BAND_RESTART_AN,
@@ -6368,8 +6373,23 @@ static void mvpp2_gmac_config(struct mvpp2_port *port, unsigned int mode,
writel(ctrl4, port->base + MVPP22_GMAC_CTRL_4_REG);
}
-static int mvpp2__mac_prepare(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface)
+static struct phylink_pcs *mvpp2_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
+{
+ struct mvpp2_port *port = mvpp2_phylink_to_port(config);
+
+ /* Select the appropriate PCS operations depending on the
+ * configured interface mode. We will only switch to a mode
+ * that the validate() checks have already passed.
+ */
+ if (mvpp2_is_xlg(interface))
+ return &port->pcs_xlg;
+ else
+ return &port->pcs_gmac;
+}
+
+static int mvpp2_mac_prepare(struct phylink_config *config, unsigned int mode,
+ phy_interface_t interface)
{
struct mvpp2_port *port = mvpp2_phylink_to_port(config);
@@ -6418,31 +6438,9 @@ static int mvpp2__mac_prepare(struct phylink_config *config, unsigned int mode,
}
}
- /* Select the appropriate PCS operations depending on the
- * configured interface mode. We will only switch to a mode
- * that the validate() checks have already passed.
- */
- if (mvpp2_is_xlg(interface))
- port->phylink_pcs.ops = &mvpp2_phylink_xlg_pcs_ops;
- else
- port->phylink_pcs.ops = &mvpp2_phylink_gmac_pcs_ops;
-
return 0;
}
-static int mvpp2_mac_prepare(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface)
-{
- struct mvpp2_port *port = mvpp2_phylink_to_port(config);
- int ret;
-
- ret = mvpp2__mac_prepare(config, mode, interface);
- if (ret == 0)
- phylink_set_pcs(port->phylink, &port->phylink_pcs);
-
- return ret;
-}
-
static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state)
{
@@ -6614,6 +6612,7 @@ static void mvpp2_mac_link_down(struct phylink_config *config,
static const struct phylink_mac_ops mvpp2_phylink_ops = {
.validate = mvpp2_phylink_validate,
+ .mac_select_pcs = mvpp2_select_pcs,
.mac_prepare = mvpp2_mac_prepare,
.mac_config = mvpp2_mac_config,
.mac_finish = mvpp2_mac_finish,
@@ -6631,12 +6630,15 @@ static void mvpp2_acpi_start(struct mvpp2_port *port)
struct phylink_link_state state = {
.interface = port->phy_interface,
};
- mvpp2__mac_prepare(&port->phylink_config, MLO_AN_INBAND,
- port->phy_interface);
+ struct phylink_pcs *pcs;
+
+ pcs = mvpp2_select_pcs(&port->phylink_config, port->phy_interface);
+
+ mvpp2_mac_prepare(&port->phylink_config, MLO_AN_INBAND,
+ port->phy_interface);
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
- port->phylink_pcs.ops->pcs_config(&port->phylink_pcs, MLO_AN_INBAND,
- port->phy_interface,
- state.advertising, false);
+ pcs->ops->pcs_config(pcs, MLO_AN_INBAND, port->phy_interface,
+ state.advertising, false);
mvpp2_mac_finish(&port->phylink_config, MLO_AN_INBAND,
port->phy_interface);
mvpp2_mac_link_up(&port->phylink_config, NULL,
@@ -6944,6 +6946,9 @@ static int mvpp2_port_probe(struct platform_device *pdev,
port->phylink_config.supported_interfaces);
}
+ port->pcs_gmac.ops = &mvpp2_phylink_gmac_pcs_ops;
+ port->pcs_xlg.ops = &mvpp2_phylink_xlg_pcs_ops;
+
phylink = phylink_create(&port->phylink_config, port_fwnode,
phy_mode, &mvpp2_phylink_ops);
if (IS_ERR(phylink)) {
--
2.30.2
next prev parent reply other threads:[~2021-12-14 14:48 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-14 14:47 [PATCH net-next 0/7] net: phylink: add PCS validation Russell King (Oracle)
2021-12-14 14:48 ` [PATCH net-next 1/7] net: phylink: add mac_select_pcs() method to phylink_mac_ops Russell King (Oracle)
2021-12-15 2:35 ` Jakub Kicinski
2021-12-14 14:48 ` [PATCH net-next 2/7] net: phylink: add pcs_validate() method Russell King (Oracle)
2021-12-14 19:49 ` Sean Anderson
2021-12-14 23:27 ` Russell King (Oracle)
2021-12-14 23:29 ` Russell King (Oracle)
2021-12-14 23:54 ` Sean Anderson
2021-12-15 0:32 ` Russell King (Oracle)
2021-12-16 15:42 ` Sean Anderson
2021-12-16 17:10 ` Russell King (Oracle)
2021-12-14 14:48 ` Russell King (Oracle) [this message]
2021-12-14 14:48 ` [PATCH net-next 4/7] net: mvpp2: convert to pcs_validate() and phylink_generic_validate() Russell King (Oracle)
2021-12-14 14:48 ` [PATCH net-next 5/7] net: mvneta: convert to use mac_prepare()/mac_finish() Russell King
2021-12-14 14:48 ` [PATCH net-next 6/7] net: mvneta: convert to phylink pcs operations Russell King
2021-12-14 14:48 ` [PATCH net-next 7/7] net: mvneta: convert to pcs_validate() and phylink_generic_validate() Russell King (Oracle)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1mx96F-00GCdL-I5@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=mw@semihalf.com \
--cc=netdev@vger.kernel.org \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.