All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
To: linuxtv-commits@linuxtv.org
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>, stable@vger.kernel.org
Subject: [git:media_stage/master] media: ov8865: Disable only enabled regulators on error path
Date: Thu, 16 Dec 2021 15:54:40 +0000	[thread overview]
Message-ID: <E1mxtBF-005dh2-Fa@www.linuxtv.org> (raw)

This is an automatic generated email to let you know that the following patch were queued:

Subject: media: ov8865: Disable only enabled regulators on error path
Author:  Sakari Ailus <sakari.ailus@linux.intel.com>
Date:    Wed Dec 15 09:38:48 2021 +0100

If powering on the sensor failed, the entire power-off sequence was run
independently of how far the power-on sequence proceeded before the error.
This lead to disabling regulators and/or clock that was not enabled.

Fix this by disabling only clocks and regulators that were enabled
previously.

Fixes: 11c0d8fdccc5 ("media: i2c: Add support for the OV8865 image sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

 drivers/media/i2c/ov8865.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

---

diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c
index ebdb20d3fe9d..d9d016cfa9ac 100644
--- a/drivers/media/i2c/ov8865.c
+++ b/drivers/media/i2c/ov8865.c
@@ -2407,27 +2407,27 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable DOVDD regulator\n");
-			goto disable;
+			return ret;
 		}
 
 		ret = regulator_enable(sensor->avdd);
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable AVDD regulator\n");
-			goto disable;
+			goto disable_dovdd;
 		}
 
 		ret = regulator_enable(sensor->dvdd);
 		if (ret) {
 			dev_err(sensor->dev,
 				"failed to enable DVDD regulator\n");
-			goto disable;
+			goto disable_avdd;
 		}
 
 		ret = clk_prepare_enable(sensor->extclk);
 		if (ret) {
 			dev_err(sensor->dev, "failed to enable EXTCLK clock\n");
-			goto disable;
+			goto disable_dvdd;
 		}
 
 		gpiod_set_value_cansleep(sensor->reset, 0);
@@ -2436,14 +2436,16 @@ static int ov8865_sensor_power(struct ov8865_sensor *sensor, bool on)
 		/* Time to enter streaming mode according to power timings. */
 		usleep_range(10000, 12000);
 	} else {
-disable:
 		gpiod_set_value_cansleep(sensor->powerdown, 1);
 		gpiod_set_value_cansleep(sensor->reset, 1);
 
 		clk_disable_unprepare(sensor->extclk);
 
+disable_dvdd:
 		regulator_disable(sensor->dvdd);
+disable_avdd:
 		regulator_disable(sensor->avdd);
+disable_dovdd:
 		regulator_disable(sensor->dovdd);
 	}
 

             reply	other threads:[~2021-12-16 16:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-16 15:54 Mauro Carvalho Chehab [this message]
  -- strict thread matches above, loose matches on Subject: below --
2021-12-16 19:54 [git:media_stage/master] media: ov8865: Disable only enabled regulators on error path Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1mxtBF-005dh2-Fa@www.linuxtv.org \
    --to=mchehab+huawei@kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linuxtv-commits@linuxtv.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.