From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@microchip.com>,
Jakub Kicinski <kuba@kernel.org>
Subject: [PATCH net-next] net: macb: use .mac_select_pcs() interface
Date: Wed, 05 Jan 2022 13:15:15 +0000 [thread overview]
Message-ID: <E1n568J-002SZX-Gr@rmk-PC.armlinux.org.uk> (raw)
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs.
We must use separate phylink_pcs instances for the USX and SGMII PCS,
rather than just changing the "ops" pointer before re-setting it to
phylink as this interface queries the PCS, rather than requesting it
to be changed.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/cadence/macb.h | 3 ++-
drivers/net/ethernet/cadence/macb_main.c | 26 +++++++++++-------------
2 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 5620b97b3482..9ddbee7de72b 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -1271,7 +1271,8 @@ struct macb {
struct mii_bus *mii_bus;
struct phylink *phylink;
struct phylink_config phylink_config;
- struct phylink_pcs phylink_pcs;
+ struct phylink_pcs phylink_usx_pcs;
+ struct phylink_pcs phylink_sgmii_pcs;
u32 caps;
unsigned int dma_burst_length;
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index d4da9adf6777..a363da928e8b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -510,7 +510,7 @@ static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface, int speed,
int duplex)
{
- struct macb *bp = container_of(pcs, struct macb, phylink_pcs);
+ struct macb *bp = container_of(pcs, struct macb, phylink_usx_pcs);
u32 config;
config = gem_readl(bp, USX_CONTROL);
@@ -524,7 +524,7 @@ static void macb_usx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
static void macb_usx_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
- struct macb *bp = container_of(pcs, struct macb, phylink_pcs);
+ struct macb *bp = container_of(pcs, struct macb, phylink_usx_pcs);
u32 val;
state->speed = SPEED_10000;
@@ -544,7 +544,7 @@ static int macb_usx_pcs_config(struct phylink_pcs *pcs,
const unsigned long *advertising,
bool permit_pause_to_mac)
{
- struct macb *bp = container_of(pcs, struct macb, phylink_pcs);
+ struct macb *bp = container_of(pcs, struct macb, phylink_usx_pcs);
gem_writel(bp, USX_CONTROL, gem_readl(bp, USX_CONTROL) |
GEM_BIT(SIGNAL_OK));
@@ -727,28 +727,23 @@ static void macb_mac_link_up(struct phylink_config *config,
netif_tx_wake_all_queues(ndev);
}
-static int macb_mac_prepare(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface)
+static struct phylink_pcs *macb_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
{
struct net_device *ndev = to_net_dev(config->dev);
struct macb *bp = netdev_priv(ndev);
if (interface == PHY_INTERFACE_MODE_10GBASER)
- bp->phylink_pcs.ops = &macb_phylink_usx_pcs_ops;
+ return &bp->phylink_usx_pcs;
else if (interface == PHY_INTERFACE_MODE_SGMII)
- bp->phylink_pcs.ops = &macb_phylink_pcs_ops;
+ return &bp->phylink_sgmii_pcs;
else
- bp->phylink_pcs.ops = NULL;
-
- if (bp->phylink_pcs.ops)
- phylink_set_pcs(bp->phylink, &bp->phylink_pcs);
-
- return 0;
+ return NULL;
}
static const struct phylink_mac_ops macb_phylink_ops = {
.validate = phylink_generic_validate,
- .mac_prepare = macb_mac_prepare,
+ .mac_select_pcs = macb_mac_select_pcs,
.mac_config = macb_mac_config,
.mac_link_down = macb_mac_link_down,
.mac_link_up = macb_mac_link_up,
@@ -806,6 +801,9 @@ static int macb_mii_probe(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
+ bp->phylink_sgmii_pcs.ops = &macb_phylink_pcs_ops;
+ bp->phylink_usx_pcs.ops = &macb_phylink_usx_pcs_ops;
+
bp->phylink_config.dev = &dev->dev;
bp->phylink_config.type = PHYLINK_NETDEV;
--
2.30.2
next reply other threads:[~2022-01-05 13:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-05 13:15 Russell King (Oracle) [this message]
2022-01-06 12:40 ` [PATCH net-next] net: macb: use .mac_select_pcs() interface patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1n568J-002SZX-Gr@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=claudiu.beznea@microchip.com \
--cc=davem@davemloft.net \
--cc=hkallweit1@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.