From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Michal Simek <michal.simek@xilinx.com>,
Harini Katakam <harinik@xilinx.com>,
Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Cc: Sean Anderson <sean.anderson@seco.com>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next 1/2] net: axienet: convert to phylink_pcs
Date: Tue, 25 Jan 2022 16:10:11 +0000 [thread overview]
Message-ID: <E1nCOOZ-005L8t-F1@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YfAgeKiKvxcQ0w57@shell.armlinux.org.uk>
Convert axienet to use the phylink_pcs layer, resulting in it no longer
being a legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
drivers/net/ethernet/xilinx/xilinx_axienet.h | 2 +
.../net/ethernet/xilinx/xilinx_axienet_main.c | 107 +++++++++---------
2 files changed, 55 insertions(+), 54 deletions(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 5b4d153b1492..40108968b350 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -386,6 +386,7 @@ struct axidma_bd {
* @phylink: Pointer to phylink instance
* @phylink_config: phylink configuration settings
* @pcs_phy: Reference to PCS/PMA PHY if used
+ * @pcs: phylink pcs structure for PCS PHY
* @switch_x_sgmii: Whether switchable 1000BaseX/SGMII mode is enabled in the core
* @axi_clk: AXI4-Lite bus clock
* @misc_clks: Misc ethernet clocks (AXI4-Stream, Ref, MGT clocks)
@@ -434,6 +435,7 @@ struct axienet_local {
struct phylink_config phylink_config;
struct mdio_device *pcs_phy;
+ struct phylink_pcs pcs;
bool switch_x_sgmii;
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 377c94ec2486..1ebdf1c62db8 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1537,78 +1537,79 @@ static const struct ethtool_ops axienet_ethtool_ops = {
.nway_reset = axienet_ethtools_nway_reset,
};
-static void axienet_mac_pcs_get_state(struct phylink_config *config,
- struct phylink_link_state *state)
+static struct axienet_local *pcs_to_axienet_local(struct phylink_pcs *pcs)
{
- struct net_device *ndev = to_net_dev(config->dev);
- struct axienet_local *lp = netdev_priv(ndev);
+ return container_of(pcs, struct axienet_local, pcs);
+}
- switch (state->interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_1000BASEX:
- phylink_mii_c22_pcs_get_state(lp->pcs_phy, state);
- break;
- default:
- break;
- }
+static void axienet_pcs_get_state(struct phylink_pcs *pcs,
+ struct phylink_link_state *state)
+{
+ struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
+
+ phylink_mii_c22_pcs_get_state(pcs_phy, state);
}
-static void axienet_mac_an_restart(struct phylink_config *config)
+static void axienet_pcs_an_restart(struct phylink_pcs *pcs)
{
- struct net_device *ndev = to_net_dev(config->dev);
- struct axienet_local *lp = netdev_priv(ndev);
+ struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
- phylink_mii_c22_pcs_an_restart(lp->pcs_phy);
+ phylink_mii_c22_pcs_an_restart(pcs_phy);
}
-static int axienet_mac_prepare(struct phylink_config *config, unsigned int mode,
- phy_interface_t iface)
+static int axienet_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
{
- struct net_device *ndev = to_net_dev(config->dev);
+ struct mdio_device *pcs_phy = pcs_to_axienet_local(pcs)->pcs_phy;
+ struct net_device *ndev = pcs_to_axienet_local(pcs)->ndev;
struct axienet_local *lp = netdev_priv(ndev);
int ret;
- switch (iface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_1000BASEX:
- if (!lp->switch_x_sgmii)
- return 0;
-
- ret = mdiobus_write(lp->pcs_phy->bus,
- lp->pcs_phy->addr,
+ if (lp->switch_x_sgmii) {
+ ret = mdiobus_write(pcs_phy->bus, pcs_phy->addr,
XLNX_MII_STD_SELECT_REG,
- iface == PHY_INTERFACE_MODE_SGMII ?
+ interface == PHY_INTERFACE_MODE_SGMII ?
XLNX_MII_STD_SELECT_SGMII : 0);
- if (ret < 0)
- netdev_warn(ndev, "Failed to switch PHY interface: %d\n",
+ if (ret < 0) {
+ netdev_warn(ndev,
+ "Failed to switch PHY interface: %d\n",
ret);
- return ret;
- default:
- return 0;
+ return ret;
+ }
}
+
+ ret = phylink_mii_c22_pcs_config(pcs_phy, mode, interface, advertising);
+ if (ret < 0)
+ netdev_warn(ndev, "Failed to configure PCS: %d\n", ret);
+
+ return ret;
}
-static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
- const struct phylink_link_state *state)
+static const struct phylink_pcs_ops axienet_pcs_ops = {
+ .pcs_get_state = axienet_pcs_get_state,
+ .pcs_config = axienet_pcs_config,
+ .pcs_an_restart = axienet_pcs_an_restart,
+};
+
+static struct phylink_pcs *axienet_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
{
struct net_device *ndev = to_net_dev(config->dev);
struct axienet_local *lp = netdev_priv(ndev);
- int ret;
- switch (state->interface) {
- case PHY_INTERFACE_MODE_SGMII:
- case PHY_INTERFACE_MODE_1000BASEX:
- ret = phylink_mii_c22_pcs_config(lp->pcs_phy, mode,
- state->interface,
- state->advertising);
- if (ret < 0)
- netdev_warn(ndev, "Failed to configure PCS: %d\n",
- ret);
- break;
+ if (interface == PHY_INTERFACE_MODE_1000BASEX ||
+ interface == PHY_INTERFACE_MODE_SGMII)
+ return &lp->pcs;
- default:
- break;
- }
+ return NULL;
+}
+
+static void axienet_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ /* nothing meaningful to do */
}
static void axienet_mac_link_down(struct phylink_config *config,
@@ -1663,9 +1664,7 @@ static void axienet_mac_link_up(struct phylink_config *config,
static const struct phylink_mac_ops axienet_phylink_ops = {
.validate = phylink_generic_validate,
- .mac_pcs_get_state = axienet_mac_pcs_get_state,
- .mac_an_restart = axienet_mac_an_restart,
- .mac_prepare = axienet_mac_prepare,
+ .mac_select_pcs = axienet_mac_select_pcs,
.mac_config = axienet_mac_config,
.mac_link_down = axienet_mac_link_down,
.mac_link_up = axienet_mac_link_up,
@@ -2079,12 +2078,12 @@ static int axienet_probe(struct platform_device *pdev)
ret = -EPROBE_DEFER;
goto cleanup_mdio;
}
- lp->phylink_config.pcs_poll = true;
+ lp->pcs.ops = &axienet_pcs_ops;
+ lp->pcs.poll = true;
}
lp->phylink_config.dev = &ndev->dev;
lp->phylink_config.type = PHYLINK_NETDEV;
- lp->phylink_config.legacy_pre_march2020 = true;
lp->phylink_config.mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
MAC_10FD | MAC_100FD | MAC_1000FD;
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-25 16:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 16:08 [PATCH net-next 0/2] net: axienet: modernise pcs implementation Russell King (Oracle)
2022-01-25 16:10 ` Russell King (Oracle) [this message]
2022-01-25 16:10 ` [PATCH net-next 2/2] net: axienet: replace mdiobus_write() with mdiodev_write() Russell King (Oracle)
2022-01-26 15:50 ` [PATCH net-next 0/2] net: axienet: modernise pcs implementation patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1nCOOZ-005L8t-F1@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=davem@davemloft.net \
--cc=harinik@xilinx.com \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=michal.simek@xilinx.com \
--cc=netdev@vger.kernel.org \
--cc=radhey.shyam.pandey@xilinx.com \
--cc=sean.anderson@seco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.