From: Russell King <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Vivien Didelot <vivien.didelot@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Florian Fainelli <f.fainelli@gmail.com>,
Jakub Kicinski <kuba@kernel.org>,
netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>,
Vladimir Oltean <olteanv@gmail.com>
Subject: [PATCH net-next 2/2] net: dsa: mv88e6xxx: get rid of SPEED_MAX setting
Date: Tue, 21 Jun 2022 10:37:40 +0100 [thread overview]
Message-ID: <E1o3aKK-0031Zc-MS@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <YrGQBssOvQBZiDS4@shell.armlinux.org.uk>
Currently, all the device specific speed setting functions convert
SPEED_MAX to the actual speed of the port. Rather than having each
of the mv88e6xxx chip specifics handling SPEED_MAX, derive it from
the mac_capabilities instead.
This is only needed for CPU and DSA ports, so move the logic up into
mv88e6xxx_setup_port() - which allows us to kill off all users of
SPEED_MAX throughout the driver.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
drivers/net/dsa/mv88e6xxx/chip.c | 39 ++++++++++++++++++++++++--------
drivers/net/dsa/mv88e6xxx/chip.h | 3 +--
drivers/net/dsa/mv88e6xxx/port.c | 21 -----------------
3 files changed, 30 insertions(+), 33 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 0b49d243e00b..37b649501500 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -449,9 +449,6 @@ static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
goto restore_link;
}
- if (speed == SPEED_MAX && chip->info->ops->port_max_speed_mode)
- mode = chip->info->ops->port_max_speed_mode(port);
-
if (chip->info->ops->port_set_pause) {
err = chip->info->ops->port_set_pause(chip, port, pause);
if (err)
@@ -3280,28 +3277,51 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
{
struct device_node *phy_handle = NULL;
struct dsa_switch *ds = chip->ds;
+ phy_interface_t mode;
struct dsa_port *dp;
- int tx_amp;
+ int tx_amp, speed;
int err;
u16 reg;
chip->ports[port].chip = chip;
chip->ports[port].port = port;
+ dp = dsa_to_port(ds, port);
+
/* MAC Forcing register: don't force link, speed, duplex or flow control
* state to any particular values on physical ports, but force the CPU
* port and all DSA ports to their maximum bandwidth and full duplex.
*/
- if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port))
+ if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) {
+ unsigned long caps = dp->pl_config.mac_capabilities;
+
+ if (chip->info->ops->port_max_speed_mode)
+ mode = chip->info->ops->port_max_speed_mode(port);
+ else
+ mode = PHY_INTERFACE_MODE_NA;
+
+ if (caps & MAC_10000FD)
+ speed = SPEED_10000;
+ else if (caps & MAC_5000FD)
+ speed = SPEED_5000;
+ else if (caps & MAC_2500FD)
+ speed = SPEED_2500;
+ else if (caps & MAC_1000)
+ speed = SPEED_1000;
+ else if (caps & MAC_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
err = mv88e6xxx_port_setup_mac(chip, port, LINK_FORCED_UP,
- SPEED_MAX, DUPLEX_FULL,
- PAUSE_OFF,
- PHY_INTERFACE_MODE_NA);
- else
+ speed, DUPLEX_FULL,
+ PAUSE_OFF, mode);
+ } else {
err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
SPEED_UNFORCED, DUPLEX_UNFORCED,
PAUSE_ON,
PHY_INTERFACE_MODE_NA);
+ }
if (err)
return err;
@@ -3473,7 +3493,6 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
}
if (chip->info->ops->serdes_set_tx_amplitude) {
- dp = dsa_to_port(ds, port);
if (dp)
phy_handle = of_parse_phandle(dp->dn, "phy-handle", 0);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 5e03cfe50156..e693154cf803 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -488,14 +488,13 @@ struct mv88e6xxx_ops {
int (*port_set_pause)(struct mv88e6xxx_chip *chip, int port,
int pause);
-#define SPEED_MAX INT_MAX
#define SPEED_UNFORCED -2
#define DUPLEX_UNFORCED -2
/* Port's MAC speed (in Mbps) and MAC duplex mode
*
* Depending on the chip, 10, 100, 200, 1000, 2500, 10000 are valid.
- * Use SPEED_UNFORCED for normal detection, SPEED_MAX for max value.
+ * Use SPEED_UNFORCED for normal detection.
*
* Use DUPLEX_HALF or DUPLEX_FULL to force half or full duplex,
* or DUPLEX_UNFORCED for normal duplex detection.
diff --git a/drivers/net/dsa/mv88e6xxx/port.c b/drivers/net/dsa/mv88e6xxx/port.c
index 3cdc985b79e2..90c55f23b7c9 100644
--- a/drivers/net/dsa/mv88e6xxx/port.c
+++ b/drivers/net/dsa/mv88e6xxx/port.c
@@ -298,9 +298,6 @@ static int mv88e6xxx_port_set_speed_duplex(struct mv88e6xxx_chip *chip,
int mv88e6185_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = 1000;
-
if (speed == 200 || speed > 1000)
return -EOPNOTSUPP;
@@ -312,9 +309,6 @@ int mv88e6185_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int mv88e6250_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = 100;
-
if (speed > 100)
return -EOPNOTSUPP;
@@ -326,9 +320,6 @@ int mv88e6250_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int mv88e6341_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = port < 5 ? 1000 : 2500;
-
if (speed > 2500)
return -EOPNOTSUPP;
@@ -354,9 +345,6 @@ phy_interface_t mv88e6341_port_max_speed_mode(int port)
int mv88e6352_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = 1000;
-
if (speed > 1000)
return -EOPNOTSUPP;
@@ -371,9 +359,6 @@ int mv88e6352_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int mv88e6390_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = port < 9 ? 1000 : 2500;
-
if (speed > 2500)
return -EOPNOTSUPP;
@@ -399,9 +384,6 @@ phy_interface_t mv88e6390_port_max_speed_mode(int port)
int mv88e6390x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
int speed, int duplex)
{
- if (speed == SPEED_MAX)
- speed = port < 9 ? 1000 : 10000;
-
if (speed == 200 && port != 0)
return -EOPNOTSUPP;
@@ -430,9 +412,6 @@ int mv88e6393x_port_set_speed_duplex(struct mv88e6xxx_chip *chip, int port,
u16 reg, ctrl;
int err;
- if (speed == SPEED_MAX)
- speed = (port > 0 && port < 9) ? 1000 : 10000;
-
if (speed == 200 && port != 0)
return -EOPNOTSUPP;
--
2.30.2
next prev parent reply other threads:[~2022-06-21 9:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-21 9:31 [PATCH net-next 0/2] net: dsa: mv88e6xxx: get rid of SPEED_MAX Russell King (Oracle)
2022-06-21 9:37 ` [PATCH net-next 1/2] net: dsa: mv88e6xxx: remove mv88e6065 dead code Russell King (Oracle)
2022-06-21 9:37 ` Russell King [this message]
2022-06-24 3:30 ` [PATCH net-next 0/2] net: dsa: mv88e6xxx: get rid of SPEED_MAX patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1o3aKK-0031Zc-MS@rmk-PC.armlinux.org.uk \
--to=rmk+kernel@armlinux.org.uk \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
--cc=vivien.didelot@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.