All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	netdev@vger.kernel.org
Subject: [PATCH net-next] net: dsa: mv88e6060: add phylink_get_caps implementation
Date: Wed, 09 Aug 2023 13:32:08 +0100	[thread overview]
Message-ID: <E1qTiMC-003FJP-V3@rmk-PC.armlinux.org.uk> (raw)

Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch.
This is a fast ethernet switch, with internal PHYs for ports 0 through
4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports
MII, REVMII, REVRMII and SNI without an internal PHY.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/mv88e6060.c | 46 +++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/net/dsa/mv88e6060.c b/drivers/net/dsa/mv88e6060.c
index fdda62d6eb16..4f3df3a3a1f6 100644
--- a/drivers/net/dsa/mv88e6060.c
+++ b/drivers/net/dsa/mv88e6060.c
@@ -247,11 +247,57 @@ mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
 	return reg_write(priv, addr, regnum, val);
 }
 
+static void mv88e6060_phylink_get_caps(struct dsa_switch *ds, int port,
+				       struct phylink_config *config)
+{
+	unsigned long *interfaces = config->supported_interfaces;
+	struct mv88e6060_priv *priv = ds->priv;
+	int addr = REG_PORT(port);
+	int ret;
+
+	ret = reg_read(priv, addr, PORT_STATUS);
+	if (ret < 0) {
+		dev_err(ds->dev,
+			"port %d: unable to read status register: %pe\n",
+			port, PTR_ERR(ret));
+		return;
+	}
+
+	if (!(ret & PORT_STATUS_PORTMODE)) {
+		/* Port configured in SNI mode (acts as a 10Mbps PHY) */
+		config->mac_capabilities = MAC_10 | MAC_SYM_PAUSE;
+		/* I don't think SNI is SMII - SMII has a sync signal, and
+		 * SNI doesn't.
+		 */
+		__set_bit(PHY_INTERFACE_MODE_SMII, interfaces);
+		return;
+	}
+
+	config->mac_capabilities = MAC_100 | MAC_10 | MAC_SYM_PAUSE;
+
+	if (port >= 4) {
+		/* Ports 4 and 5 can support MII, REVMII and REVRMII modes */
+		__set_bit(PHY_INTERFACE_MODE_MII, interfaces);
+		__set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
+		__set_bit(PHY_INTERFACE_MODE_REVRMII, interfaces);
+	}
+	if (port <= 4) {
+		/* Ports 0 to 3 have internal PHYs, and port 4 can optionally
+		 * use an internal PHY.
+		 */
+		/* Internal PHY */
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
+		/* Default phylib interface mode */
+		__set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
+	}
+}
+
 static const struct dsa_switch_ops mv88e6060_switch_ops = {
 	.get_tag_protocol = mv88e6060_get_tag_protocol,
 	.setup		= mv88e6060_setup,
 	.phy_read	= mv88e6060_phy_read,
 	.phy_write	= mv88e6060_phy_write,
+	.phylink_get_caps = mv88e6060_phylink_get_caps,
 };
 
 static int mv88e6060_probe(struct mdio_device *mdiodev)
-- 
2.30.2


             reply	other threads:[~2023-08-09 12:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-09 12:32 Russell King (Oracle) [this message]
2023-08-09 13:45 ` [PATCH net-next] net: dsa: mv88e6060: add phylink_get_caps implementation Andrew Lunn
2023-08-09 13:48   ` Russell King (Oracle)
2023-08-09 14:19 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1qTiMC-003FJP-V3@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.