All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org,
	Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>,
	Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next] net: stmmac: visconti: convert to set_clk_tx_rate() method
Date: Tue, 15 Apr 2025 17:52:48 +0100	[thread overview]
Message-ID: <E1u4jWi-000rJi-Rg@rmk-PC.armlinux.org.uk> (raw)

Convert visconti to use the set_clk_tx_rate() method. By doing so,
the GMAC control register will already have been updated (unlike with
the fix_mac_speed() method) so this code can be removed while porting
to the set_clk_tx_rate() method.

There is also no need for the spinlock, and has never been - neither
fix_mac_speed() nor set_clk_tx_rate() can be called by more than one
thread at a time, so the lock does nothing useful.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../ethernet/stmicro/stmmac/dwmac-visconti.c   | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
index e1de471b215c..2215aef3ef42 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
@@ -51,22 +51,16 @@ struct visconti_eth {
 	u32 phy_intf_sel;
 	struct clk *phy_ref_clk;
 	struct device *dev;
-	spinlock_t lock; /* lock to protect register update */
 };
 
-static void visconti_eth_fix_mac_speed(void *priv, int speed, unsigned int mode)
+static int visconti_eth_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
+					phy_interface_t interface, int speed)
 {
 	struct visconti_eth *dwmac = priv;
 	struct net_device *netdev = dev_get_drvdata(dwmac->dev);
 	unsigned int val, clk_sel_val = 0;
 	unsigned long flags;
 
-	spin_lock_irqsave(&dwmac->lock, flags);
-
-	/* adjust link */
-	val = readl(dwmac->reg + MAC_CTRL_REG);
-	val &= ~(GMAC_CONFIG_PS | GMAC_CONFIG_FES);
-
 	switch (speed) {
 	case SPEED_1000:
 		if (dwmac->phy_intf_sel == ETHER_CONFIG_INTF_RGMII)
@@ -89,12 +83,9 @@ static void visconti_eth_fix_mac_speed(void *priv, int speed, unsigned int mode)
 	default:
 		/* No bit control */
 		netdev_err(netdev, "Unsupported speed request (%d)", speed);
-		spin_unlock_irqrestore(&dwmac->lock, flags);
 		return;
 	}
 
-	writel(val, dwmac->reg + MAC_CTRL_REG);
-
 	/* Stop internal clock */
 	val = readl(dwmac->reg + REG_ETHER_CLOCK_SEL);
 	val &= ~(ETHER_CLK_SEL_RMII_CLK_EN | ETHER_CLK_SEL_RX_TX_CLK_EN);
@@ -136,7 +127,7 @@ static void visconti_eth_fix_mac_speed(void *priv, int speed, unsigned int mode)
 		break;
 	}
 
-	spin_unlock_irqrestore(&dwmac->lock, flags);
+	return 0;
 }
 
 static int visconti_eth_init_hw(struct platform_device *pdev, struct plat_stmmacenet_data *plat_dat)
@@ -228,7 +219,6 @@ static int visconti_eth_dwmac_probe(struct platform_device *pdev)
 	if (!dwmac)
 		return -ENOMEM;
 
-	spin_lock_init(&dwmac->lock);
 	dwmac->reg = stmmac_res.addr;
 	dwmac->dev = &pdev->dev;
 
@@ -237,7 +227,7 @@ static int visconti_eth_dwmac_probe(struct platform_device *pdev)
 	__set_bit(PHY_INTERFACE_MODE_RMII, plat_dat->supported_interfaces);
 
 	plat_dat->bsp_priv = dwmac;
-	plat_dat->fix_mac_speed = visconti_eth_fix_mac_speed;
+	plat_dat->set_clk_tx_rate = visconti_eth_set_clk_tx_rate;
 
 	ret = visconti_eth_clock_probe(pdev, plat_dat);
 	if (ret)
-- 
2.30.2



             reply	other threads:[~2025-04-15 17:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-04-15 16:52 Russell King (Oracle) [this message]
2025-04-15 16:58 ` [PATCH net-next] net: stmmac: visconti: convert to set_clk_tx_rate() method Andrew Lunn
2025-04-16  4:56 ` nobuhiro1.iwamatsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1u4jWi-000rJi-Rg@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=nobuhiro1.iwamatsu@toshiba.co.jp \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.