[PATCH net-next v2 2/5] net: stmmac: socfpga: provide init function

["Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>]

Both the resume and probe path needs to configure the phy mode, so
provide a common function to do this which can later be hooked into
plat_dat->init.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index bcdb25ee2a33..000d349a6d4c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -435,6 +435,13 @@ static struct phylink_pcs *socfpga_dwmac_select_pcs(struct stmmac_priv *priv,
 	return priv->hw->phylink_pcs;
 }
 
+static int socfpga_dwmac_init(struct platform_device *pdev, void *bsp_priv)
+{
+	struct socfpga_dwmac *dwmac = bsp_priv;
+
+	return dwmac->ops->set_phy_mode(dwmac);
+}
+
 static int socfpga_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -497,7 +504,7 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = ops->set_phy_mode(dwmac);
+	ret = socfpga_dwmac_init(pdev, dwmac);
 	if (ret)
 		goto err_dvr_remove;
 
@@ -516,7 +523,7 @@ static int socfpga_dwmac_resume(struct device *dev)
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	struct socfpga_dwmac *dwmac_priv = get_stmmac_bsp_priv(dev);
 
-	dwmac_priv->ops->set_phy_mode(priv->plat->bsp_priv);
+	socfpga_dwmac_init(to_platform_device(dev), dwmac_priv);
 
 	return stmmac_resume(dev);
 }
-- 
2.30.2