All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
To: Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Keguang Zhang <keguang.zhang@gmail.com>,
	linux-arm-kernel@lists.infradead.org, linux-mips@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	netdev@vger.kernel.org, Paolo Abeni <pabeni@redhat.com>
Subject: [PATCH net-next 2/2] net: stmmac: loongson1: get ls1b resource only once
Date: Wed, 18 Jun 2025 11:41:14 +0100	[thread overview]
Message-ID: <E1uRqEE-004c7M-Go@rmk-PC.armlinux.org.uk> (raw)
In-Reply-To: <aFKXzlno7HkG-cNh@shell.armlinux.org.uk>

ls1b_dwmac_syscon_init() was getting the stmmac iomem resource to detect
which GMAC block is being used. Move this to a separate setup() function
that only runs at probe time, so it can sensibly behave with an
unrecognised resource adress. Use this to set a MAC index (id) which is
then used in place of testing the base address.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson1.c | 49 ++++++++++++++-----
 1 file changed, 37 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
index 78d9540be10c..32b5d1492e2e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson1.c
@@ -44,28 +44,50 @@
 struct ls1x_dwmac {
 	struct plat_stmmacenet_data *plat_dat;
 	struct regmap *regmap;
+	unsigned int id;
 };
 
 struct ls1x_data {
+	int (*setup)(struct platform_device *pdev,
+		     struct plat_stmmacenet_data *plat_dat);
 	int (*init)(struct platform_device *pdev, void *bsp_priv);
 };
 
-static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
+static int ls1b_dwmac_setup(struct platform_device *pdev,
+			    struct plat_stmmacenet_data *plat_dat)
 {
-	struct ls1x_dwmac *dwmac = priv;
-	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
-	struct regmap *regmap = dwmac->regmap;
+	struct ls1x_dwmac *dwmac = plat_dat->bsp_priv;
 	struct resource *res;
-	unsigned long reg_base;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
+		/* This shouldn't fail - stmmac_get_platform_resources()
+		 * already mapped this resource.
+		 */
 		dev_err(&pdev->dev, "Could not get IO_MEM resources\n");
 		return -EINVAL;
 	}
-	reg_base = (unsigned long)res->start;
 
-	if (reg_base == LS1B_GMAC0_BASE) {
+	if (res->start == LS1B_GMAC0_BASE) {
+		dwmac->id = 0;
+	} else if (res->start == LS1B_GMAC1_BASE) {
+		dwmac->id = 1;
+	} else {
+		dev_err(&pdev->dev, "Invalid Ethernet MAC base address %pR",
+			res);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
+{
+	struct ls1x_dwmac *dwmac = priv;
+	struct plat_stmmacenet_data *plat = dwmac->plat_dat;
+	struct regmap *regmap = dwmac->regmap;
+
+	if (dwmac->id == 0) {
 		switch (plat->phy_interface) {
 		case PHY_INTERFACE_MODE_RGMII_ID:
 			regmap_update_bits(regmap, LS1X_SYSCON0,
@@ -84,7 +106,7 @@ static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
 		}
 
 		regmap_update_bits(regmap, LS1X_SYSCON0, GMAC0_SHUT, 0);
-	} else if (reg_base == LS1B_GMAC1_BASE) {
+	} else if (dwmac->id == 1) {
 		regmap_update_bits(regmap, LS1X_SYSCON0,
 				   GMAC1_USE_UART1 | GMAC1_USE_UART0,
 				   GMAC1_USE_UART1 | GMAC1_USE_UART0);
@@ -108,10 +130,6 @@ static int ls1b_dwmac_syscon_init(struct platform_device *pdev, void *priv)
 		}
 
 		regmap_update_bits(regmap, LS1X_SYSCON1, GMAC1_SHUT, 0);
-	} else {
-		dev_err(&pdev->dev, "Invalid Ethernet MAC base address %lx",
-			reg_base);
-		return -EINVAL;
 	}
 
 	return 0;
@@ -183,10 +201,17 @@ static int ls1x_dwmac_probe(struct platform_device *pdev)
 	dwmac->plat_dat = plat_dat;
 	dwmac->regmap = regmap;
 
+	if (data->setup) {
+		ret = data->setup(pdev, plat_dat);
+		if (ret)
+			return ret;
+	}
+
 	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
 }
 
 static const struct ls1x_data ls1b_dwmac_data = {
+	.setup = ls1b_dwmac_setup,
 	.init = ls1b_dwmac_syscon_init,
 };
 
-- 
2.30.2



  parent reply	other threads:[~2025-06-18 12:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-18 10:41 [PATCH net-next 0/2] net: stmmac: loongson1: cleanups Russell King (Oracle)
2025-06-18 10:41 ` [PATCH net-next 1/2] net: stmmac: loongson1: provide match data struct Russell King (Oracle)
2025-06-18 18:33   ` Simon Horman
2025-06-19  5:46     ` Keguang Zhang
2025-06-18 19:27   ` Andrew Lunn
2025-06-19  5:48   ` Keguang Zhang
2025-06-18 10:41 ` Russell King (Oracle) [this message]
2025-06-18 18:33   ` [PATCH net-next 2/2] net: stmmac: loongson1: get ls1b resource only once Simon Horman
2025-06-19  5:49   ` Keguang Zhang
2025-06-19 22:30 ` [PATCH net-next 0/2] net: stmmac: loongson1: cleanups patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1uRqEE-004c7M-Go@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=hkallweit1@gmail.com \
    --cc=keguang.zhang@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.