On 10/29/2013 01:07 AM, jojo wrote:

Hi,
I use the command "sudo dd
if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb
bs=1M" to put image in to microSD,
is it right about for my step to burning SD image into microSD ?

Hi Jojo

I copy using:

sudo dd if=fsl-image-gui-imx53qsb-20131024020930.rootfs.sdcard of=/dev/sdb

Daiane

BTW, what's your step of burning ? i think about my command is wrong :(

Thanks,

- Jojo

在 2013年10月28日星期一，下午11:07，Daiane Angolini 写道：

On 10/28/2013 09:22 AM, jojo wrote:
Hi
Help ….

no none met this issue ?
U-Boot 2013.10 (Oct 28 2013 - 10:51:11)

Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1

I tested with core-image-base, and I was able to reach the user-space
prompt.

Daiane

OMG...

Thanks,

- Jojo

在 2013年10月25日星期五，下午3:44，jojo 写道：

Hi,
I use microSD to boot my board,

and i have done two microSD card,
either of them is failed :(

Thanks,

- Jojo

在 2013年10月25日星期五，下午3:18，Eric Bénard 写道：

Hi Jojo,

Le Fri, 25 Oct 2013 14:49:31 +0800,
jojo <rjiejie@gmail.com <mailto:rjiejie@gmail.com>> a écrit :
I rebuild the imx53qsb completely and boot failed also as bellow :

and i do not change anything about for yocto dora except DL_DIR to
redirect to "DL_DIR = "${TOPDIR}/../../downloads""

U-Boot 2013.10-rc3 (Oct 25 2013 - 13:28:32)

Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
MMC: no card present
MMC init failed

can you try with an other SDCard it seems u-boot fails to initialize
this one.
I'll try dora on MX53QSB asap.

Eric

_______________________________________________
meta-freescale mailing list
meta-freescale@yoctoproject.org <mailto:meta-freescale@yoctoproject.org>
https://lists.yoctoproject.org/listinfo/meta-freescale

--
Daiane

Daiane