From: holger_zecha@hp.com
To: hopper@omnifarious.mn.org, holger_zecha@hp.com
Cc: linux-lvm@msede.com
Subject: RE: Re: [linux-lvm] LVM 0.8 and reiser filesystem
Date: Wed, 7 Jun 2000 08:39:58 +0200 [thread overview]
Message-ID: <H0000aed07d40671@MHS> (raw)
[-- Attachment #1: BDY.RTF --]
[-- Type: text/plain, Size: 1348 bytes --]
Hello,
the idea is the same as in HP-UX.
When we are using Linux, it would be good, to get as close to HP-UX as
possible.
We're now using LVM in HP-UX to mirror the Volume groupe vg00
/dev/vg00/lvol4 307200 73329 219390 25% /
--- Logical volumes ---
LV Name /dev/vg00/lvol4
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 1
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 300
Current LE 75
Allocated PE 150
Stripes 0
Stripe Size (Kbytes) 0
Bad block off
Allocation strict/contiguous
IO Timeout (Seconds) default
We know, that it is possible to implement RAID 1 in other ways, but it's
difficult to support.
-----Original Message-----
From: hopper@omnifarious.mn.org [mailto:hopper@omnifarious.mn.org]
Sent: Dienstag, 6. Juni 2000 19:34
To: HOLGER ZECHA /HP-Germany,om17
Cc: hopper@omnifarious.mn.org; linux-lvm@msede.com
Subject: Re: [linux-lvm] LVM 0.8 and reiser filesystem
<< File: Re_ [linux-lvm] LVM 0.TXT >> << File: Re_ [linux-lvm] LVM
0.TXT >> << File: Untitled1 >>
[-- Attachment #2: BDY.RTF --]
[-- Type: application/rtf, Size: 1820 bytes --]
reply other threads:[~2000-06-07 6:39 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=H0000aed07d40671@MHS \
--to=holger_zecha@hp.com \
--cc=hopper@omnifarious.mn.org \
--cc=linux-lvm@msede.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.