From: "james bond" <difda@hotmail.com>
To: linux-kernel@vger.kernel.org
Subject: BIG PROBLEM
Date: Thu, 28 Jun 2001 18:49:46 -0000 [thread overview]
Message-ID: <LAW2-F118HsRsWg8ubZ000077c1@hotmail.com> (raw)
1-systeme hangs when i try ton compile anything
i've compiled the kernel 2.4.4 , once i finish and boot the first time on
2.4.4 everything goses ok ,
only too problemes
1st- klogd takes 100% CPU time
2nd- cat /proc/cpuinf --guives me too CPU'S without putin any info about
the CPU 1
like that approximatively
--------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse
bogomips : 992.87
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name :
stepping : 3
cpu MHz :
cache size :
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags :
bogomips :
--------------------------------------------
at the second boot it detects correctly CPU0 and CPU1
cat /proc/cpuinfo -->
-------------------------------------------
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr sse
bogomips : 992.87
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 7
model name : Pentium III (Katmai)
stepping : 3
cpu MHz : 498.672
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 3
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
pat pse36 mmx fxsr sse
bogomips : 996.14
----------------------------------------
cat /proc/version -->
----------------------------------------
Linux version 2.4.4 (root@seraka) (gcc version 2.95.3 20010315 (release)) #2
SMP Thu Jun 28 07:04:06 CEST 2001
----------------------------------------
cat /proc/modules --> nothing cause im no using modules
----------------------------------------
cat /proc/ioports
-------------------------------0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
4000-403f : Intel Corporation 82371AB PIIX4 ACPI
5000-501f : Intel Corporation 82371AB PIIX4 ACPI
d000-dfff : PCI Bus #01
e000-e01f : Intel Corporation 82371AB PIIX4 USB
e400-e4ff : Adaptec 7892A00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d25ff : Extension ROM
000d3000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00245892 : Kernel code
00245893-002ca41f : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
dc000000-dfffffff : PCI Bus #01
dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP
dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP
e0000000-e1ffffff : PCI Bus #01
e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP
e5000000-e5007fff : Yamaha Corporation YMF-724
e5008000-e5008fff : Adaptec AHA-2940U2/W
e5008000-e5008fff : aic7xxx
e5009000-e5009fff : Adaptec 7892A
e5009000-e5009fff : aic7xxx
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
------------------------------------------------
e800-e8ff : Adaptec AHA-2940U2/W
ec00-ec1f : 3Com Corporation 3c595 100BaseTX [Vortex]
ec00-ec1f : eth0
f000-f00f : Intel Corporation 82371AB PIIX4 IDE
-----------------------
cat /proc/iomem --->00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cc000-000d25ff : Extension ROM
000d3000-000d87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-0ffeffff : System RAM
00100000-00245892 : Kernel code
00245893-002ca41f : Kernel data
0fff0000-0fff2fff : ACPI Non-volatile Storage
0fff3000-0fffffff : ACPI Tables
d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
dc000000-dfffffff : PCI Bus #01
dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP
dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP
e0000000-e1ffffff : PCI Bus #01
e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP
e5000000-e5007fff : Yamaha Corporation YMF-724
e5008000-e5008fff : Adaptec AHA-2940U2/W
e5008000-e5008fff : aic7xxx
e5009000-e5009fff : Adaptec 7892A
e5009000-e5009fff : aic7xxx
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
----------------------------------------------
lspci -vvv --->
Expansion ROM at e2000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W
Subsystem: Adaptec: Unknown device a180
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (9750ns min, 6250ns max), cache line size 08
Interrupt: pin A routed to IRQ 17
BIST result: 00
Region 0: I/O ports at e800 [disabled] [size=256]
Region 1: Memory at e5008000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at e3000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (750ns min, 2000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at ec00 [size=32]
Expansion ROM at e4000000 [disabled] [size=64K]
00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-724 (rev 05)
Subsystem: Yamaha Corporation YMF724-Based PCI Audio Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 6250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: [50] Power Management version 1
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev
82) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc.: Unknown device 0641
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (4000ns min, 8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [f0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
-----------------------------------------------------
cat /proc/scsi/scsi -->
-----------------------------------------------------
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: DDYS-T18350M Rev: S93D
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 01 Lun: 00
Vendor: COMPAQ Model: HB00931B93 Rev: A195
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 02 Lun: 00
Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 03 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: COMPAQ Model: HB00931B93 Rev: A195
Type: Direct-Access ANSI SCSI revision: 02
----------------------------------------------------
my motherboard is an Gigabyte GA-6BXD with f3 bios and my memory is 256 ECC
,
so perhaps the defucnt is caused by the second CPU "CPU1" cause i hade somme
probles with is ,
thank's for helping me caus i start to disespaire "sorry for my poor
english"
and i don't wana use Miscosoft
with regards
---------------------------------------------------
please answer me @ battata.chafik@noos.fr thanks
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
next reply other threads:[~2001-06-28 18:50 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-06-28 18:49 james bond [this message]
2001-06-28 19:07 ` BIG PROBLEM Alan Cox
2001-06-28 19:33 ` Ryan W. Maple
2001-06-28 20:59 ` Ralf Baechle
2001-06-28 21:17 ` Justin Guyett
2001-06-28 21:35 ` Ryan W. Maple
2001-06-28 21:46 ` Ralf Baechle
-- strict thread matches above, loose matches on Subject: below --
2008-01-31 14:19 Big Problem ohviey1
2008-02-03 20:35 ` Richard Purdie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=LAW2-F118HsRsWg8ubZ000077c1@hotmail.com \
--to=difda@hotmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.