From: David Heidelberg <david@ixit.cz>
To: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux Next Mailing List <linux-next@vger.kernel.org>
Subject: Re: linux-next: build warning after merge of the qcom tree
Date: Mon, 25 Oct 2021 01:40:33 +0200 [thread overview]
Message-ID: <LR9I1R.IR2MHJE8MRKZ1@ixit.cz> (raw)
In-Reply-To: <20211025102802.11a92147@canb.auug.org.au>
Hello,
I believe patch "ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor
node" should solve it [1] (sent 4 days ago, not merged yet thou).
David
[1] https://lists.sr.ht/~okias/devicetree/patches/25837
Best regards
David Heidelberg
On Mon, Oct 25 2021 at 10:28:02 +1100, Stephen Rothwell
<sfr@canb.auug.org.au> wrote:
> Hi all,
>
> After merging the qcom tree, today's linux-next build (arm
> multi_v7_defconfig) produced this warning:
>
> arch/arm/boot/dts/qcom-ipq8064.dtsi:52.19-70.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor0-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:72.19-90.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor1-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:92.19-110.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor2-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:112.19-130.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor3-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:132.19-150.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor4-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:152.19-170.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor5-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:172.19-190.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor6-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:192.19-210.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor7-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:212.19-230.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor8-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:232.19-250.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor9-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:252.20-270.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor10-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:52.19-70.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor0-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:72.19-90.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor1-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:92.19-110.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor2-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:112.19-130.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor3-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:132.19-150.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor4-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:152.19-170.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor5-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:172.19-190.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor6-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:192.19-210.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor7-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:212.19-230.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor8-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:232.19-250.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor9-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
> arch/arm/boot/dts/qcom-ipq8064.dtsi:252.20-270.5: Warning
> (thermal_sensors_property): /thermal-zones/sensor10-thermal: Missing
> property '#thermal-sensor-cells' in node
> /soc/clock-controller@900000/thermal-sensor@900000 or bad phandle
> (referred from thermal-sensors[0])
>
> Presumably introduced by commit
>
> 88542b1d37dc ("ARM: dts: qcom: fix thermal zones naming")
>
> --
> Cheers,
> Stephen Rothwell
next prev parent reply other threads:[~2021-10-24 23:40 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-24 23:28 linux-next: build warning after merge of the qcom tree Stephen Rothwell
2021-10-24 23:40 ` David Heidelberg [this message]
2021-10-25 2:24 ` Bjorn Andersson
-- strict thread matches above, loose matches on Subject: below --
2020-04-15 0:25 Stephen Rothwell
2020-04-15 4:51 ` Stephen Boyd
2020-04-15 5:04 ` Bjorn Andersson
2019-08-07 0:08 Stephen Rothwell
2018-11-15 23:10 Stephen Rothwell
2018-11-28 21:25 ` Stephen Rothwell
2018-11-29 16:30 ` Stephen Boyd
2018-11-30 4:13 ` Stephen Rothwell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=LR9I1R.IR2MHJE8MRKZ1@ixit.cz \
--to=david@ixit.cz \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-next@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.