Hi Khem

Replacing 
IMAGE_INSTALL += "i2c-tools vim"
with
IMAGE_INSTALL_append = " i2c-tools vim"

in my local.conf solve the problem.

More than half of the sources were rebuild.

Thanks a lot.

Now I found also the info in the manual "Using IMAGE_INSTALL with the += operator from the /conf/local.conf file or from within an image recipe is not recommended as it can cause ordering issues."

Regards,

Wojciech 

--
Securely sent with Tutanota. Get your own encrypted, ad-free mailbox:
https://tutanota.com


Dec 17, 2019, 05:48 by raj.khem@gmail.com:
On Mon, Dec 16, 2019 at 1:56 PM <wojciech.st@tutanota.com> wrote:

Problem with rootfs boot on my raspberrypi.

Hi
I am building simple image for my raspbery pi 3 A+ and connect to the pi via USB-UART converter and see the following in the console
...
[ 2.071459] Run /bin/init as init process
[ 2.076507] Run /bin/sh as init process
sh: cannot set terminal process group (-1): Inappropriate ioctl for device
sh: no job control in this shell
sh-4.4#



I build with the "bitbake core-image-base" and tried to run it on rpi 3A+, 3B, 3B+ and the problem is always the same it cannot switch to the rootfs on the sd card it seem like it stack at initramfs or some middle ground.

I burn the *.rpi-sdimg image to SD card with dd from my Ubuntu16.04 host machine.
I tried with two branches thud and warrior and the problem is exactly the same.
The strange thing is that in this initramfs there are no tools like find grep modprobe etc. but I see my extra tools "i2c-tools vim"

Here is my local.conf adjustments:
MACHINE ?= "raspberrypi3"
ENABLE_I2C = "1"
ENABLE_UART = "1"
IMAGE_INSTALL += "i2c-tools vim"

Can you turn this into
IMAGE_INSTALL_append = " i2c-tools vim"

and the bblayer.conf
BBLAYERS ?= " \
/media/dave/Develop/yoctopi/warrior/sources/poky/meta \
/media/dave/Develop/yoctopi/warrior/sources/poky/meta-poky \
/media/dave/Develop/yoctopi/warrior/sources/poky/meta-yocto-bsp \
/media/dave/Develop/yoctopi/warrior/sources/meta-openembedded/meta-oe \
/media/dave/Develop/yoctopi/warrior/sources/meta-raspberrypi \
"

I tried also to build with the deprecated image "bitbake rpi-basic-image" but then I did not get my extra tools "i2c-tools vim".

Anyone have any idea what can be wrong with my approach ?

Regards,

Wojciech


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#47702): https://lists.yoctoproject.org/g/yocto/message/47702
Mute This Topic: https://lists.yoctoproject.org/mt/68744766/1997914
Mute #raspberrypi: https://lists.yoctoproject.org/mk?hashtag=raspberrypi&subid=6692173
Group Owner: yocto+owner@lists.yoctoproject.org
Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub [raj.khem@gmail.com]
-=-=-=-=-=-=-=-=-=-=-=-