From: Ramses <ramses@well-founded.dev>
To: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux Regressions <regressions@lists.linux.dev>,
Linux Power Management <linux-pm@vger.kernel.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Ingo Molnar <mingo@redhat.com>,
Peter Zijlstra <peterz@infradead.org>,
Juri Lelli <juri.lelli@redhat.com>,
Vincent Guittot <vincent.guittot@linaro.org>,
Yu Chen <yu.c.chen@intel.com>
Subject: Re: Fwd: Intel hybrid CPU scheduler always prefers E cores
Date: Tue, 28 Nov 2023 23:37:16 +0100 (CET) [thread overview]
Message-ID: <NkN44cg--3-9@well-founded.dev> (raw)
In-Reply-To: <b2b9121c6d2003b45f7fde6a97bb479a1ed634c7.camel@linux.intel.com>
(Sending again since I accidentally sent my last mail as HTML.)
I applied the patch on top of 6.6.2, but unfortunately I see more or less the same behaviour as before, with single-threaded CPU-bound tasks running almost exclusively on E cores.
Ramses
Nov 28, 2023, 18:39 by tim.c.chen@linux.intel.com:
> On Tue, 2023-11-28 at 20:22 +0700, Bagas Sanjaya wrote:
>
>> Hi,
>>
>> I come across an interesting bug report on Bugzilla [1]. The reporter
>> wrote:
>>
>> > I am running an intel alder lake system (Core i7-1260P), with a mix of P and E cores.
>> >
>> > Since Linux 6.6, and also on the current 6.7 RC, the scheduler seems to have a strong preference for the E cores, and single threaded workloads are consistently scheduled on one of the E cores.
>> >
>> > With Linux 6.4 and before, when I ran a single threaded CPU-bound process, it was scheduled on a P core. With 6.5, it seems that the choice of P or E seemed rather random.
>> >
>> > I tested these by running "stress" with different amounts of threads. With a single thread on Linux 6.6 and 6.7, I always have an E core at 100% and no load on the P cores. Starting from 3 threads I get some load on the P cores as well, but the E cores stay more heavily loaded.
>> > With "taskset" I can force a process to run on a P core, but clearly it's not very practical to have to do CPU scheduling manually.
>> >
>> > This severely affects single-threaded performance of my CPU since the E cores are considerably slower. Several of my workflows are now a lot slower due to them being single-threaded and heavily CPU-bound and being scheduled on E cores whereas they would run on P cores before.
>> >
>> > I am not sure what the exact desired behaviour is here, to balance power consumption and performance, but currently my P cores are barely used for single-threaded workloads.
>> >
>> > Is this intended behaviour or is this indeed a regression? Or is there perhaps any configuration that I should have done from my side? Is there any further info that I can provide to help you figure out what's going on?
>>
>> PM and scheduler people, is this a regression or works as intended?
>>
>> Thanks.
>>
>> [1]: https://bugzilla.kernel.org/show_bug.cgi?id=218195
>>
>
> I have noticed that the current code sometimes is quite trigger happy
> moving tasks off P-core, whenever there are more than 2 tasks on a core.
> Sometimes, Short running house keeping tasks
> could disturb the running task on P-core as a result.
>
> Can you try the following patch? On my Alder Lake system, I see as I add single
> threaded tasks, they first run on P-cores, then followed by E-cores with this
> patch on 6.6.
>
> Tim
>
> From 68a15ef01803c252261ebb47d86dfc1f2c68ae1e Mon Sep 17 00:00:00 2001
> From: Tim Chen <tim.c.chen@linux.intel.com>
> Date: Fri, 6 Oct 2023 15:58:56 -0700
> Subject: [PATCH] sched/fair: Don't force smt balancing when CPU has spare
> capacity
>
> Currently group_smt_balance is picked whenever there are more
> than two tasks on a core with two SMT. However, the utilization
> of those tasks may be low and do not warrant a task
> migration to a CPU of lower priority.
>
> Adjust sched group clssification and sibling_imbalance()
> to reflect this consideration. Use sibling_imbalance() to
> compute imbalance in calculate_imbalance() for the group_smt_balance
> case.
>
> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
>
> ---
> kernel/sched/fair.c | 23 +++++++++++------------
> 1 file changed, 11 insertions(+), 12 deletions(-)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index ef7490c4b8b4..7dd7c2d2367a 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -9460,14 +9460,15 @@ group_type group_classify(unsigned int imbalance_pct,
> if (sgs->group_asym_packing)
> return group_asym_packing;
>
> - if (sgs->group_smt_balance)
> - return group_smt_balance;
> -
> if (sgs->group_misfit_task_load)
> return group_misfit_task;
>
> - if (!group_has_capacity(imbalance_pct, sgs))
> - return group_fully_busy;
> + if (!group_has_capacity(imbalance_pct, sgs)) {
> + if (sgs->group_smt_balance)
> + return group_smt_balance;
> + else
> + return group_fully_busy;
> + }
>
> return group_has_spare;
> }
> @@ -9573,6 +9574,11 @@ static inline long sibling_imbalance(struct lb_env *env,
> if (env->idle == CPU_NOT_IDLE || !busiest->sum_nr_running)
> return 0;
>
> + /* Do not pull tasks off preferred group with spare capacity */
> + if (busiest->group_type == group_has_spare &&
> + sched_asym_prefer(sds->busiest->asym_prefer_cpu, env->dst_cpu))
> + return 0;
> +
> ncores_busiest = sds->busiest->cores;
> ncores_local = sds->local->cores;
>
> @@ -10411,13 +10417,6 @@ static inline void calculate_imbalance(struct lb_env *env, struct sd_lb_stats *s
> return;
> }
>
> - if (busiest->group_type == group_smt_balance) {
> - /* Reduce number of tasks sharing CPU capacity */
> - env->migration_type = migrate_task;
> - env->imbalance = 1;
> - return;
> - }
> -
> if (busiest->group_type == group_imbalanced) {
> /*
> * In the group_imb case we cannot rely on group-wide averages
> --
> 2.32.0
>
next prev parent reply other threads:[~2023-11-28 22:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-28 13:22 Fwd: Intel hybrid CPU scheduler always prefers E cores Bagas Sanjaya
2023-11-28 14:02 ` Peter Zijlstra
2023-11-28 14:19 ` Bagas Sanjaya
2023-12-18 16:11 ` Ricardo Neri
2023-11-28 17:33 ` Tim Chen
2023-11-28 22:37 ` Ramses [this message]
[not found] ` <NkN3JYx--3-9@well-founded.dev>
2023-11-28 23:10 ` Tim Chen
2023-11-28 23:17 ` Ramses
2023-11-29 15:05 ` srinivas pandruvada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=NkN44cg--3-9@well-founded.dev \
--to=ramses@well-founded.dev \
--cc=bagasdotme@gmail.com \
--cc=juri.lelli@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=rafael@kernel.org \
--cc=regressions@lists.linux.dev \
--cc=tim.c.chen@linux.intel.com \
--cc=vincent.guittot@linaro.org \
--cc=viresh.kumar@linaro.org \
--cc=yu.c.chen@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.