From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Ethy H. Brito" Date: Tue, 12 Oct 2004 23:29:40 +0000 Subject: [LARTC] fw and match filters (was NAT+mangle+tc) Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tue, 12 Oct 2004, Robert Felber wrote: > try: > > tc filter add dev eth2 protocol ip parent 1: prio 1 handle 1 fw classid 1:X > > X is your class, it should not be 1 since this is usually a root class (I > guess you are using HTB). Example: Ok. I created two special classes under '1:' for each interface to acomodate the icmp traffic. Now the 'tc filter ... fw ... ' lines works flawlessly. But after I execute the 'tc filter ... fw ... ' command, every 'tc filter ... match ... ' after those gives me the 'RTNETLINK answers: Invalid argument' error. Aren't they (fw and match) supposed to cohexist? If I comment the 2 'filter fw' lines the errors desappear. Any ideas? Ethy H. Brito /"\ InterNexo Ltda. \ / CAMPANHA DA FITA ASCII - CONTRA MAIL HTML +55 (12) 3941-6860 X ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL S.J.Campos - Brasil / \ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/