From mboxrd@z Thu Jan 1 00:00:00 1970 From: Trent Piepho Subject: Re: [PATCH 2/3] i2c: Let bus drivers add SPD to their class Date: Wed, 4 Jun 2008 12:59:11 -0700 (PDT) Message-ID: References: <20080603130221.1f819e64@hyperion.delvare> <200806031319.56606.david-b@pacbell.net> <9e4733910806031412t52e7ed1bl8fd56751bef12a7a@mail.gmail.com> <9e4733910806031503w46662d4fib36d3b67563bbdf1@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <9e4733910806031503w46662d4fib36d3b67563bbdf1-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org Errors-To: i2c-bounces-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org To: Jon Smirl Cc: Linux I2C List-Id: linux-i2c@vger.kernel.org On Tue, 3 Jun 2008, Jon Smirl wrote: > On 6/3/08, Trent Piepho wrote: > > On Tue, 3 Jun 2008, Jon Smirl wrote: > > > > > drivers/i2c/busses/i2c-elektor.c | 2 +- > > > > > drivers/i2c/busses/i2c-gpio.c | 2 +- > > > > > drivers/i2c/busses/i2c-i801.c | 2 +- > > > > > drivers/i2c/busses/i2c-ibm_iic.c | 4 ++-- > > > > > drivers/i2c/busses/i2c-iop3xx.c | 2 +- > > > > > drivers/i2c/busses/i2c-isch.c | 2 +- > > > > > drivers/i2c/busses/i2c-mpc.c | 2 +- > > > > > > Freescale embedded, no sticks > > > > > > I know you're wrong about this one, because I have a Freescale board with > > an mpc i2c adapter with SPD SODIMMs on the I2C bus sitting right in front > > of me. The whole reason I added hexdump support the I2C tools' SPD parser > > was so I could parse the SPD data by hexdumping the eeproms with busybox. > > Which CPU are you using? Maybe we should change to a socket. MPC8572E, but U-Boot has support for programming the DRAM controller from SPD data for a lot of Freescale chips. _______________________________________________ i2c mailing list i2c-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org http://lists.lm-sensors.org/mailman/listinfo/i2c